REQUIREMENTS TO RUN THIS SOFTWARE
---------------------------------
1. WINDOWS 3.1 ON A 386 OR BETTER MACHINE (386 ENHANCED MODE)
2. AT LEAST 4MB OF RAM
3. AT LEAST 2MB OF FREE DISK SPACE TO INSTALL THIS PRODUCT

FIRST TIME INSTALLATION INSTRUCTIONS - for UPGRADE see below
---------------------------------------------------------------
1. COPY these files to a new empty DISKETTE.
1. PUT THE DISKETTE IN THE DISKETTE DRIVE.
2. FROM INSIDE WINDOWS, CLICK 'FILE MANAGER' AND SELECT THE DISKETTE
        DRIVE THAT CONTAINS THE BIG RED DISKETTE.
3. DOUBLE CLICK THE INSTALL.EXE PROGRAM
4. FOLLOW THE PROMPTS
5. THE BIG RED ICON SHOULD BE CREATED, AND YOU ARE READY TO RUN IT.

IMPORTANT NOTES for EVERYONE - Especially for INTERNATIONAL Users
------------------------------------------------------------------
1. Your Windows DATE and TIME must be set correctly for our tests to run!!
   The Date Format must be MDY with a date seperator of "/". 
   These are under CONTROL PANEL in the International & Date/Time ICONS.
2. To PRINT correctly, the Orientation MUST be set to PORTRAIT !!!
        This is under CONTROL PANEL, then PRINTERS, then SETUP.
        We use the Microsoft PRINT MANAGER for all Printing.

UPGRADING TO A NEW TEST DISKETTE
-------------------------------------------------------
1. Change into the directory -BRSTWIN - which contains the BIG RED Files.
        CD BRSTWIN
2. From inside the BRSTWIN directory, DELETE all the old files.
        DEL *.*  (From inside BRSTWIN)
3. Put the new BIG RED Diskette in the A: diskette drive, and type the
        line below exactly in DOS or perform the Windows equivalent.
4. XCOPY A:\*.* C:\BRSTWIN\*.*
5. From inside C:\BRSTWIN , run the program BRSTWIN.EXE
        This will take a few seconds to explode files.
6. From inside windows, Click the BIB RED Icon you used before.