=======================================================
        MICROSOFT MAIL GATEWAY TO MHS OUTPOST.EXE VERSION 3.0.6
        =======================================================

ARTICLE-ID:Q125246

The information in this article applies to Microsoft Mail Gateway to
MHS, version 3.0.

The following files are included with this update:

   OUTPOST.EXE (73,231 bytes, dated 01-08-95, 10:05 P.M.)
   README.TXT (this file)

---------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as a Microsoft   |
| Software Library [MSL] file) IS PROVIDED "AS IS" WITHOUT WARRANTY  |
| OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT        |
| LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR        |
| FITNESS FOR A PARTICULAR PURPOSE. The user assumes the entire risk |
| as to the accuracy and the use of this MSL file. This MSL file     |
| may be copied and distributed subject to the following conditions: |
| 1) All text must be copied without modification and all pages must |
| be included; 2) If software is included, all files must be copied  |
| without modification; 3) All components of this MSL file must be   |
| distributed together; and 4) This MSL file may not be distributed  |
| for profit.                                                        |
|                                                                    |
| Copyright 1995 Microsoft Corporation. All Rights Reserved.         |
| Microsoft is a registered trademark of Microsoft Corporation.      |
 --------------------------------------------------------------------

SUMMARY
=======

Microsoft provides a replacement for the OUTPOST.EXE program that is
included with version 3.0 of Microsoft Mail Gateway to MHS.

For complete information about obtaining and installing OUTPOST.EXE,
see the "To update your OUTPOST.EXE file" section below.

MORE INFORMATION
================

This update resolves the following problems:

 - Incoming messages that contain a line longer than 79 characters
   are wrapped after the 78th column, and the 79th character is
   deleted.

 - Version 3.0.5 of Microsoft Mail Gateway to MHS may display the
   following error when a reply is sent to a MHS mail user from
   Microsoft Mail in a non-delivery notice:

      Invalid Address

To replace your OUTPOST.EXE file
--------------------------------

At the MS-DOS command prompt, type the following and press ENTER

   copy <path>\outpost.exe <destination>

where <path> is the drive and directory where you ran the self-extracting
MHSOUT.EXE file and <destination> is the drive and directory where your
OUTPOST.EXE file currently resides. For example, if you ran the self-
extracting file from the TEST directory on drive D, and your OUTPOST.EXE
file is located in the MAILEXE directory on drive C, type the following
command:

   copy d:\test\outpost.exe c:\mailexe