
  NEW USERS - SEE: Command Line Options, Find, and Replace. There are some
  POWERFUL features in these sections.

  This IS Rev. 1 - watch out for bugs and let me know (See About menu).

══ To Access Menus ════════════════════════════════════════════════════════
 Top Menus:
    Press Alt followed by the highlighted letter of the desired menu
 Current Window Menu:
    Press and HOLD the Alt key while pressing the - (Minus) key.
 
══ Editing Keys ═══════════════════════════════════════════════════════════
  ┌─Inserting────────────────────────┐ ┌─Copying──────────────────────────┐
  │ Switch to insert/overtype    Ins │ │ To Clipboard   Ctrl+C or Ctrl+Ins│
  │ From Clipboard         Shift+Ins │ └──────────────────────────────────┘
  └──────────────────────────────────┘ ┌─Finding──────────────────────────┐
  ┌─Selecting────────────────────────┐ │ Find text                 Ctrl+F │
  │ Characters/lines     Shift+Arrow │ │ Replace Text              Ctrl+R │
  │ Words           Shift+Ctrl+Arrow │ │ Repeat last Find/Replace      F3 │
  └──────────────────────────────────┘ └──────────────────────────────────┘
  ┌─Getting Help─────────────────────┐ ┌─Deleting─────────────────────────┐
  │ On menus and commands         F1 │ │ Cut Selected text      Shift+Del │
  └──────────────────────────────────┘ │ Erase selected text          Del │
                                       └──────────────────────────────────┘
┌─ Navigation Keys ────────────────────┬──────────────────────────────────┐
│ Character left     Left Arrow        │   Beginning of line    Home     │
│ Character right    Right Arrow       │   End of line          End       │
│ Word left          Ctrl+Left Arrow   │   Page up              PgUp      │
│ Word right         Ctrl+Right Arrow  │   Page down            PgDn      │
│ Line up            Up Arrow          │   Beginning of File    Ctrl+Home │
│ Line down          Down Arrow        │   End of File          Ctrl+End  │
└──────────────────────────────────────┴──────────────────────────────────┘ 

┌─Window Keys ─────────────────────────┬──────────────────────────────────┐
│ Open Window Menu      Alt+-(Minus)   │  Move to next window   Ctrl+F6   │
│ Close window          Ctrl+F4        │  Minimize window        Ctrl+F9  │
│ Restore window size   Ctrl+F5        │  Maximize window        Ctrl+F10 │
│ Move window           Ctrl+F7 then Arrows. Esc when done                │
│ Size window           Ctrl+F8 then Arrows. Esc when done                │
└──────────────────────────────────────┴──────────────────────────────────┘
═══ Shortcut Keys ═════════════════════════════════════════════════════════
 Any commands which have shortcut keys have the shortcut listed next to them
 in their menu.

═══ Command Line Options ══════════════════════════════════════════════════
 There are a number of command line options to make editing multiple files
 easier.

─── D: ─────────────────────────────────────────────────────────────────────
        SYSED D:

    Where D is a drive letter. Will try to load D:\AUTOEXEC.BAT,
    D:\CONFIG.SYS, D:\NET.BAT

─── /W ────────────────────────────────────────────────────────────────────
        SYSED /W

  Will try to load: \WINDOWS\SYSTEM.INI, \WINDOWS\WIN.INI
 ┌── NOTE! ───────────────────────────────────────────────────────────────┐
 │ D: and /W can be combined but are NOT compatible with the additional   │
 │ filespecs as shown below.                                              │
 └────────────────────────────────────────────────────────────────────────┘
── Filespec(s)─────────────────────────────────────────────────────────────
  Multiple filenames can be loaded at once and can used in conjunction
  with global filespecs. Foe example the following is legal:

   SYSED CONFIG.SYS C:\DOS\CONFIG.BAK D:\WINDOWS\*.INI C:\???.BAT

─── /S ───────────────────────────────────────────────────────────────────
       SYSED filespec(s) /S

  Adding a /S will force a search of subdirectories as well for example:

   SYSED C:\MY.BAT C:\WINDOWS\*.INI /S

  Will search all of drive C for MY.BAT and all C:\WINDOWS subdirectories
  for any INI files.

        NOTE! - Only ten files can be opened at once. The rest are
                stored and opened after closing one or more windows
                using More - SEE: More.
─── /T ────────────────────────────────────────────────────────────────────

   /T Switches to TILE mode from CASCADE.

─── /M ────────────────────────────────────────────────────────────────────

   /M Maximizes each window as it is opened.

═══ File Menu Choices ═════════════════════════════════════════════════════

─── New ───────────────────────────────────────────────────────────────────
  Selecting New from the File menu opens a new window to begin a new file.

─── Open ──────────────────────────────────────────────────────────────────
  Open brings up the OPEN dialog box so you can select an existing file to
  edit.

─── Open Special ──────────────────────────────────────────────────────────
  Opens your file as a SINGLE LINE so you can see and edit Carriage Returns
  and Line Feeds.

─── Save ──────────────────────────────────────────────────────────────────
  Saves the file in the currently active window. You will be asked to
  confirm. If it is a new file you will be prompted for a name.

─── Close ─────────────────────────────────────────────────────────────────
  Close closes the currently active window. If the contents have changed
  since the last save you will be given a chance to save.

─── Save As ───────────────────────────────────────────────────────────────
  Prompts for a new filename before saving. CAUTION! You will NOT be
  notified if the file already exists.

─── SaVe All/CLose All ────────────────────────────────────────────────────
  The same as save and close but "Walks" through all open windows.

─── DeleTe File ───────────────────────────────────────────────────────────
  Deletes a file. You will be prompted to confirm. Select Yes to delete the
  file in the active window, No for a Dialog Box, Cancel to Abort.

─── Print ─────────────────────────────────────────────────────────────────
  Prints text to your printer. Choices are:  LPT1, LPT2, or LPT3. Print
  Active Window, All Windows, or Selected Text. Print Filename at top.

─── Make Dir ──────────────────────────────────────────────────────────────
  Allows you to create a new directory

─── Delete Dir ────────────────────────────────────────────────────────────
  Allows you to DELETE a directory. BE VERY CAREFUL WITH THIS!! IT WILL
  DELETE ALL FILES AND ALL SUBDIRECTORIES UNDER THE SELECTED DIRECTORY!!!!

─── DOS Shell ─────────────────────────────────────────────────────────────
  Will let you shell to DOS to run a command.

─── Exit ──────────────────────────────────────────────────────────────────
  Exit the Sysed program. You will be prompted so you may save any files
  which have changed.

═══ Edit Menu Choices ═════════════════════════════════════════════════════
  Note: text can be copied from one window to the next using CUT/COPY/PASTE.

─── Cut ───────────────────────────────────────────────────────────────────
  Deletes the selected text but copies it to the clipboard.

─── Copy ──────────────────────────────────────────────────────────────────
  Copies the selected text to the clipboard

─── Paste ─────────────────────────────────────────────────────────────────
  Copies text from the clipboard at the location of the cursor. IF TEXT IS
  SELECTED IT WILL BE REPLACED WITH THE CONTENTS OF THE CLIPBOARD.

─── Delete ────────────────────────────────────────────────────────────────
  Deletes the selected text, if any, or the character over the cursor.

─── Find/Replace ──────────────────────────────────────────────────────────
  Searches for the specified text. Default is the selected text. A dialog
  will open with several choices:

── Match Case: Check this for a Case Sensitive search.
── Whole Word: Check this to stop on whole words only
── All Windows: Will search for the specified text in ALL open windows.
── Search Filespec: You can search for text in files on the disk by
   entering the desired filespec in this box. If the text is found the
   file will be opened and the text displayed. MAKE SURE YOU DON'T HAVE
   ALL 10 WINDOWS OPEN WHEN YOU DO THIS OR SYSED WILL BE UNABLE TO DISPLAY
   THE FILES IT FINDS!

 If you enter a Search Filespec you will also have the following choices:
── Check Subdirectories: Check this to search subdirectories as well.
── Check files > 30k: Check this if you want to search large files. Since
   SYSED cannot load files larger that 30k it is not possible to edit them,
   but a portion of them will be loaded to display any text that is found.
 If you are using Replace you will also have the following:
── Save & Close W/O asking: BE VERY CAREFUL WITH THIS!! If you choose this
   AND choose CHANGE ALL then EVERY FILE IN YOUR FILESPEC WILL BE OPENED,
   CHANGED, AND SAVED WITHOUT YOUR ASKING!!
── Find Next: Find only. Starts/Continues the search use F3 after the first.
── Find and Verify: Replace only. Finds the next occurence of the search
   text and asks if you want to change it or not.
── Change All: Replace only. Changes all occurences of the Find text with
   the replacement text without stopping.

─── Repeat Last Find ──────────────────────────────────────────────────────
   Continues the find and replace operation.
   Note that Pressing F3 or selecting Repeat Last Find continues whichever
   operation was being performed last - either find or replace.

─── Insert ASCII ──────────────────────────────────────────────────────────
   Provides an easy way to insert ANY ASCII character into a file. You can
   type in the ASCII code in the box, or, if you have a mouse, select point
   and shoot and pick the desired characters off black display and the
   buttons. Either way, the characters select will display on the Text:
   line. You can also type in characters on the Text: line.

═══ Window Menu Choices ══════════════════════════════════════════════════

── Tile ──────────────────────────────────────────────────────────────────
   Sizes and "Tiles" all the open windows so that each one is fully visible
   on the screen.

── Cascade ───────────────────────────────────────────────────────────────
   Displays each open window overlapping each other so that each window
   remains larger than tiled, but only the title bar is visible on all
   but the top window.

── Maximize ───────────────────────────────────────────────────────────────
   This is a toggle. When it is on any NEW windows that are opened will
   automatically be full screen. When Maximize is on their is a small dot
   to the left of the word maximize on the menu.

── Next Window ────────────────────────────────────────────────────────────
   Switches you to the next open window, if any.

── About ──────────────────────────────────────────────────────────────────
   Opens a window to display information about SYSED and how to contact the
   Pink Flamingo Software.

─── More ──────────────────────────────────────────────────────────────────
   If more than ten files are found in your command line filespec(s) the
   first ten are opened and the filespec(s) for the balance are stored. The
   number of files remaining is listed after the word More on the menu line.
   After you have  closed one or more windows you can open additional files
   one at a time by selecting More from the menu line.

