MAKEDISK.BAT is used to create a Device Support Diskette containing
the Iomega OS/2 OAD Drivers version 2.33. 

To create the diskette:

        1. Place a FORMATTED 1.44M floppy diskette into drive A: or B:.
        
        2. From a DOS window or DOS full screen session type the
           following command:

                MAKEDISK a:
                   or
                MAKEDISK b:
                 
           depending on the drive containing the formatted floppy. 

        3. After confirming that a formatted floppy is contained in the
           desired drive, press any key to continue.

        4. The diskette can now be used by the OS/2 DDINSTL.EXE utility
           to install the Iomega OS/2 OAD Drivers. Refer to Manual.exe
           on the diskette for more information.