NDIS...................General installation notes NDIS INSTALLATION NOTES: FOR THE INTEL EtherExpress(tm) 16 FAMILY OF NETWORK ADAPTERS ============================================================ This document applies to the EtherExpress(tm) 16, 16/TP, 16C, MCA, and MCA/TP. It contains installation notes for installing the driver. It does not explain how to configure an EtherExpress board. For instructions about configuring the board, see either the Expert's Guide or the Complete Guide for your board. This document is also available on FaxBACK. Document #6309. INTRODUCTION: ------------- Many different network operating systems use a standard NDIS driver to talk to the network adapter. The NDIS subdirectory on the EtherExpress disk contains the files you need to use the EtherExpress card with one of these operating systems. FILE Purpose ---- -------------------------------------------- EXP16.DOS NDIS driver for DOS workstations. EXP16.OS2 NDIS driver for servers & OS/2 workstations. PROTOCOL.INI Fragment of the general PROTOCOL.INI file. This fragment contains information specific to the EtherExpress 16 boards. You'll need to add this fragment to the general PROTOCOL.INI file. EXPSTAT.EXE A utility to help determine the status of the driver. (In the root directory) Your NOS may also make use of a Network information (.NIF) file. If so, you can find the .NIF file for DOS workstations in the \MSLANMAN.DOS\DRIVERS\NIF directory, and the .NIF file for OS/2 workstations in the \MSLANMAN.OS2\DRIVERS\NIF directory. There are some specific documents on FaxBACK that may help. ---------------------------------------------------------------- EtherExpress 16: Retix Configuration Information........... 6452 EtherExpress 16: DEC Pathworks Configuration Information... 6454 EtherExpress 16: FTP PC/TCP Configuration Information...... 6321