;--------------------------------------------------------------------------; ; ; ; ; ; ------------ Bit-Bucket Software, Co. ; ; \ 10001101 / Writers and Distributors of ; ; \ 011110 / Freely Available Software. ; ; \ 1011 / ; ; ------ ; ; ; ; (C) Copyright 1987-90, Bit Bucket Software Co., a Delaware Corporation. ; ; ; ; ; ; ENGLISH language text for BinkleyTerm 2.40 ; ; ; ; ; ; For complete details of the licensing restrictions, please refer ; ; to the License agreement, which is published in its entirety in ; ; the MAKEFILE and BT.C, and also contained in the file LICENSE.240. ; ; ; ; USE OF THIS FILE IS SUBJECT TO THE RESTRICTIONS CONTAINED IN THE ; ; BINKLEYTERM LICENSING AGREEMENT. IF YOU DO NOT FIND THE TEXT OF ; ; THIS AGREEMENT IN ANY OF THE AFOREMENTIONED FILES, OR IF YOU DO ; ; NOT HAVE THESE FILES, YOU SHOULD IMMEDIATELY CONTACT BIT BUCKET ; ; SOFTWARE CO. AT ONE OF THE ADDRESSES LISTED BELOW. IN NO EVENT ; ; SHOULD YOU PROCEED TO USE THIS FILE WITHOUT HAVING ACCEPTED THE ; ; TERMS OF THE BINKLEYTERM LICENSING AGREEMENT, OR SUCH OTHER ; ; AGREEMENT AS YOU ARE ABLE TO REACH WITH BIT BUCKET SOFTWARE, CO. ; ; ; ; ; ; You can contact Bit Bucket Software Co. at any one of the following ; ; addresses: ; ; ; ; Bit Bucket Software Co. FidoNet 1:104/501, 1:132/491, 1:141/491 ; ; P.O. Box 460398 AlterNet 7:491/0 ; ; Aurora, CO 80046 BBS-Net 86:2030/1 ; ; Internet f491.n132.z1.fidonet.org ; ; ; ; Please feel free to contact us at any time to share your comments about ; ; our software and/or licensing policies. ; ;--------------------------------------------------------------------------; ; ; We really should tell you what these all correspond to, but since ; release is imminent, we don't have the time. In general, if there ; is a single trailing space, it is significant. If there are ; multiple trailing spaces, then that field can be no longer than the ; current line length. ; ; All lines starting with ';' are comments ; Comments may be put on any individual line using ';' as leftmost character ; ; Compiler converts '\n' and '\r' for you. ; ; The following line contains the record count and version number ; Record count should be one greater than X_TOTAL_MSGS in MSG.H !! 347 1 ; ; Start of message text below ; :Dialing %s with script '%s' !Could not open script %s +Master script timer expired +Script '%s' failed at line %d !Revision 3 FOSSIL does not support BREAK signal !Too many labels in script Macro number is out of range 1-9 Shell number Illegal zone: %s\n Requests Allowed LogLevel must be 1-5 - %s is unknown\n Ridiculous MAXport value: %s\n Illegal port: %s\n Illegal CARRIER mask: %s\n key call Unknown or illegal config line: %s\n Directory '%s' does not exist!\n BinkleyTerm may fail to execute properly because of this!\n \rPress to enter BBS.\r \r\rProcessing Mail. Please hang up.\r\r +Nothing to send to %s !Connection attempt aborted #Modem hang up sequence :No outgoing file requests :Outbound file requests :End of outbound file requests *File Requests declined \r\r* Address %s Using %s\r\n Intro: *Remote didn't respond *Lost Carrier *Password-protected session !Password Error from %s: His='%s' Ours='%s' !Called %s and got %s :WaZOO method: *End of WaZOO Session Sending Mail Packet Open Keyboard Escape File %s truncated +Dupe file renamed: %s Open Character Device Too many errors File %s deleted Transfer cancelled !Couldn't open CTL file: %s Darn! The FOSSIL seems to have gone away! Exiting Cannot re-open logfile FOSSIL: %Fs FOSSIL: Revision Level 3 Assumed :Starting Event %d #Exit at start of event with errorlevel %d #Running clean/pack sequence #System re-enabled after clean/pack sequence !Date rollover problem? :Exiting to BBS with Errorlevel %u :Spawning BBS :Returned from BBS :Exiting to external mailer with Errorlevel %u #Setting baud to %u *Remote Uses Version Program *Sending mail using FTS-0001 compatible fallback *Refusing inbound file requests !Tired of waiting for other end. *End of FTS-0001 compatible session *Receiving mail using FTS-0001 compatible fallback *Giving mail to %s *Node %s refused to pickup mail !Memory overflow error Outbound File Attaches *Making file request End of *Receiving inbound mail *Pickup is turned off - refusing mail. Inbound Mail Packet !Password Error assumed !Mail Packet '%s' cannot be renamed !Mail Packet renamed to '%s' Can't find protocol module: Duplicate protocol name: *Processing node %s -- %s !Couldn't find Address: %s !Disconnecting nuisance caller !No BOSS in the nodelist !Unable to open %s !Unable to allocate memory for Nodelist Index !Failed to read nodelist index into memory !Unable to position to node record in %s !Not able to read node record from %s File Requests :%d matching files sent !Bad Bark Request Data - streaming garbage !Bad crc - trying again !System misconfigured or no entry in Nodelist Event %d - Waiting :Incoming call, dial aborted Dynamic Event :Exit requested from keyboard :Function key exit - errorlevel %d Disabling Modem :Invoking Message Reader :Message Reader returned to BinkleyTerm Enabling Modem !No Message Reader to invoke !Could not do GET !Could not do KILL :Entering POLL Mode :Poll completed !Could not do SEND :Keyboard request to enter terminal mode :Polling Boss Node :Executing keyboard shell %d :Returning from keyboard shell !No keyboard shell %d Junk character from keyboard - continuing :Shelling to Command Interpreter \r\nType EXIT to return to BinkleyTerm\r\n :BinkleyTerm Reactivated !Calls not permitted during this event. Immediate call requested \rPlease enter a net/node number: Currently Polling Node Init Waiting Dialing HangUp Connect :Dialing %s Ending time wraps through midnight - not allowed\n '%s' has an invalid START-TIME\n '%s' has an invalid END-TIME\n '%s' has bad AvgWait (higher than max of 1800 or less than min of 0)\n '%s' has a bad Errorlevel code\n '%s' has a bad number of Tries\n '%s' has something indecipherable\n '%s' has an invalid DAY field\n Nothing in Outbound Area Node Status !Insufficient data for session +End of connection attempt !Still have mail for %s :Exit after compressed mail with errorlevel %d :Exit after file extension '%s' with errorlevel %d :Exit after receiving mail with errorlevel %d :Received mail, running 'AfterMail' program #Re-enabling system following 'AfterMail' program Setting to initial speed of baud. Press Alt-F10 for HELP.\r\n Multi-Tasker: Current Settings Today at a Glance Pending Outbound Mail Initializing System Recent Activity Transfer Status Event: Port: Status: Init BBS/Mail: Calls Out: Good/Cost: Files I/O: Last: Press Alt-F10 For Help Node: %s !Password override for outgoing call \r**Zmodem Autodownload initiated\r\n \r**Zmodem Autodownload finished\r\n \r\nBinkleyTerm now communicating at \r\nPlease enter a phone (or net/node) number: \r\nUnable to force carrier drop by dropping DTR!\r\n \r\nWelcome back!\r\n \r\nLog file name: \r\nBinkleyTerm now in MAILER mode\r\n BinkleyTerm now in MANUAL mode\r\n \r\nBinkleyTerm now using COM \r\nBinkleyTerm is ready to SEND a file...\r\n Which Protocol do you want BinkleyTerm to use?\r\n \r\nBinkleyTerm is ready to RECEIVE a file...\r\n \r\nSending BREAK signal\r\n Done\r\n \r\nYou are using Sorry. I don't know that protocol, returning to terminal mode.\r\n Filename to SEND: OK....Choose! Filename to GET: \r\nLogfile %s closed.\r\n \r\nCould not open logfile %s\r\n \r\nLogfile %s open.\r\n :Connection terminated Switching back to Polling: GET a File Address to GET from: Password to use: Are you sure (Y/N)? Yes No SEND a File Address to SEND to: KILL outbound mail Address to KILL: Kill ALL mail? drats No Send - Remote Hung Up +Corrected %d errors in %ld blocks +Sent +Remote Synchronizing to Offset %ld !Temporary receive file '%s' could not be opened +Already have %s +Synchronizing to End of File +Synchronizing to Offset %ld +Received !Original name of %s could not be used !EOT not expected until block %ld *Remote System UNKNOWN - FTS-0001 Mailer System Initializing. Please wait...\n \r\nUnrecognized option: %s\r\n \r\nThanks for using %s,\r\n Another fine User-DEVELOPED software package!\r\n +Remote refused %s !Error Can't +CPS: %lu (%lu bytes) Efficiency: %lu%% Compressed Mail Net File Elapsed Trouble? Resending from %s Send %ld blks of %s (%ld bytes) Update File Request :Executing !Carrier lost, request(s) aborted !File Request limit exceeded !Event Overrun - requests aborted No AVAIL list No ABOUT file !OKFILE Error `%s' !Request password error: '%s' '%s' '%s' Rcv %ld blks of %s from %s (%ld bytes) Timeout Checksum CRC Junk Block on block Find Read Seek Short Block Close Unlink Write SKIP command received F1 ... F10 = input phone number, (ENTER) = start, (ESC) = abort\r\n ALT-Fn = load saved set (n), Shift-Fn = save into set (n)\r\n User set last loaded/saved: %d\r\n Phone Numbers currently Selected:\r\n\r\n \r\nInput Command: Element Chosen = %2d\r\n Currently contains %s\r\n (ENTER) = save, (space)(ENTER) = delete, or enter new number:\r\n (ENTER) or (space)(ENTER) = cancel, or enter new number:\r\n Error reading data from set %d\r\n Error closing file for set %d\r\n Set %d successfully loaded.\r\n Error writing data to set %d\r\n Current list of numbers saved to set %d\r\n Press ENTER to continue... #Starting Phone List Scan #Connected to list element %d Debris Long pkt !Ignoring `%s' !Out of disk space Receiving !Zmodem Init Problem %s bad position !Zmodem Recv Problem %s Bad packet at %ld Send Recv !Other end died !Dropping to one-way xfer +Refusing %s !Unknown packet type %d !Session aborted #Sending %s !Can't decode file length *Finished partial file %s *Saving partial file %s *Remote can't handle file requests You now have BinkleyTerm in DUMB TERMINAL mode.\r\n In DUMB TERMINAL mode the following special keys are enabled:\r\n\r\n Alt-B Cycle baud rate Alt-C Change communications parameters\r\n Alt-D Dial a system Alt-E Erase the current screen\r\n Alt-H Hang up by dropping DTR Alt-I Initialize the modem\r\n Alt-J Jump to Command Shell Alt-L Start/stop logging to a file\r\n Alt-M Manual poll Alt-P Cycle communications port\r\n Alt-R Redial from a 'scan list' Alt-S Send BREAK signal to port\r\n Alt-U Go to UNATTENDED MAILER mode Alt-V Show BinkleyTerm version\r\n Alt-X Exit BinkleyTerm Alt-Y Call boss node for mail\r\n PgUp Send a file (UPLOAD) PgDn Receive a file (DOWNLOAD)\r\n Alt-F%-2d Macro string '%s'\r\n \r\nPress a key to continue... You now have BinkleyTerm in UNATTENDED MAILER mode.\r\n In UNATTENDED MAILER mode the following special keys are enabled:\r\n\r\n C Make the next call (if any) immediately\r\n Alt-C Clear data from the \"Today at a Glance\" window.\r\n Alt-I Initialize the modem\r\n Alt-J/ESC Push to Command Shell\r\n Alt-M Manually POLL a node\r\n Alt-Q Quit the current event\r\n Alt-R Re-start mail events as though none have previously executed\r\n Alt-T Shift into DUMB TERMINAL mode.\r\n Alt-W Redraw screen.\r\n Alt-X Exit from BinkleyTerm with ERRORLEVEL 1\r\n Alt-Y Call boss node for mail\r\n cursorkeys PGUP/DN, UP/DN ARROW, HOME, and END scroll the 'Pending' window\r\n F1..F10 Exit BinkleyTerm with errorlevel (10*n) (F1=10,etc)\r\n Alt-B Blank the screen immediately\r\n Alt-E Execute '%s' as message editor\r\n Alt-F%-2d Execute '%s'\r\n ; ; The following 3-line message is system dependent. ; For OS/2 the message should look like: ; ;Couldn't initialize COM port. Check config.sys for COM0?.SYS\n ;or make sure the network is started if you are using a modem\n ;on another computer.\n ; ; Following is the DOS version of the message: ; I'm sorry, there doesn't appear to be a FOSSIL driver loaded.\r\n BinkleyTerm requires a FOSSIL driver. Please take care of this before\r\n attempting to run BinkleyTerm again.\r\n !Could not create temp flagfile %s Created flagfile %s Other node sending to %s !Erroneous attempt to clear flag for %s Deleted flagfile %s !Unable to delete flag file %s !Exceeded file request byte limit Nodelist index refresh necessary Couldn't set SIGINT Modem protocol negotation filtered Event %d starts in %d minutes Flags for next event: %s