=============== THE == GRAPHIX == HIDEAWAY == NETWORK =====================

	                     Presents:

              HSLink for Telegard 2.5q Beta or Higher!

===========================================================================

Have you ever wondered what it would be like to have Bi-Modem but better?
With use of this TXT file and the other files included in this ZIP HSLink
will be at your fingertips.

Files in this ZIP:

Name:              Size: (Bytes)  Date:
============     =========       ========
HSCONFIG.EXE      45,312         11-26-91
HSLINK.EXE        40,740         11-26-91
HSLINK.DOC        87,557         11-26-91
HSLINK.CFG            16         12-04-91
HSLTGQ.TXT         2,608         12-05-91
README.TGH         1,057         11-19-91

If any of these files have been tampered with contact Aj Haines through
TeleNet Canada (TNC) or contact him at The Graphix HideAway BBS Network.
[416]622-1737.

	What to do:
	===========

First put the HSLink files in the C:\xx (Your Telegard 2.5q Beta directory).
Next run HSCONFIG.EXE and configure HSLink to your system's settings.  Using
any simple (Or complex) text editor you may have handy edit the file: 
HSLINK.CFG.  It should look something like this after running HSCONFIG:

-P(Your COM Port)
-PI(If you have an iregular COM port IRQ location)
-UC:(The directory where your uploads go to)

This command should be inserted on the FIRST line of this file:

-K (Opens the COM port at the default baud rate)

After that load up Telegard and execute the <X> Protocol Editor option.  Insert 
a new protocol into the list already contained in your PROTOCOL.DAT file.
Next:

1:  <!> Make protocol active
2:  <1> Enter Key to be used and enter new description for HSLink.
3:  <2> Enter new access required (Only if appliciable).
4:  <3> Enter the name of the Temp. Log (Eg. DSZTEMP.LOG)
5:  <4> Enter the upload log name (Eg. HSLINKU.LOG)
6:  <4> Enter the download log name (Eg. HSLINKD.LOG)
7:  Depress <5> then depress <U>, then <E> for external command, then
    this command line: 

HSLINK -P(Your COM Port) -NU %3 %4 %5 %6 %7 %8 %9 <ENTER>

8:  Depress <5> once again this time using the <D> for downloads, <E> once
    again and then this command line:

HSLINK -P(Your COM Port) <ENTER>

9:  Exit back to the WFC menu.
10: Enjoy HSLink installed into Telegard 2.5q Beta!

All rights reserved by:  Aj Haines - The Graphix HideAway BBS [416]622-1737.
Call today for ANY Telegard Support.  Written by:  Aj Haines & Marc Ackley.
(c)1991.