Setting up Renegade with SZMODEM
		    ================================


Legal Stuff
------------
SZMODEM is (C) by Scott Baker
Renegade is (C) by Cott Lang
------------


Hello to you all !

This is only a very small contribution to the Renegade community.
I like the idea of Bidirectional transfers. 
I like SZmodem.  To save you a little time, I wrote this little thing
in order to ease the installation since it can be difficult.

Making SZMODEM process a DORINFO1.DEF could be done the following way:
Insert a "blind"-command (means no short & long description, using the same
command key you use to switch to the file menu) before the command that goes
to the file-menu, and set it up as a "DD" type door (that creates you the
DORINFO1.DEF". The "MSTRING" for that command for example can be left blank.
FIRST of all, here's the configuration of SZmodem, if you run your BBS with
a highspeed modem:

If you lock your COM port with BNU or X00 leave the /LOCK %K in the command
line. If not you may safely delete this parameter. Telling ALL of your
Protocols what the locked rate is makes a difference here in transfer speed.
Not All Protocols support the passing of the locked rate as well as the 
modem to modem speed but many do.

SZMODEM Configuration:                                                          
										
 1. Default Com parameters........ COM1:19200,N,8,1                             
 3. BBS Dorinfo processing........ 1                                            
 4. Input buffer size............. 512 bytes                                   
 5. Output buffer size............ 128 bytes                                   
 6. SZPath........................ c:\protocol                                  
 7. Delaytime..................... 2 seconds                                    
 8. SZTurbo....................... Enabled                                      
 9. Snow checking................. Off                                          
10. Ega/Vga Display............... Off                                          
11. SZMODEM.LOG log file.......... On                                         
12. Allow remote sysop page....... Yes                                           
13. DORINFOx.DEF path............. c:\bbs\node1                                        
14. Handshaking options........... CTS/RTS (Hard)                               
15. Locked Baud Rate.............. 19200                                        

(Owners of 2400 Baud modems should change params 1,14,15 to fit their
 equipment: e.g. Handshake:none / locked baud rate : none ...)
										

For single transfers you should edit your prots like this...

!. Type/protocl:Active - Single protocol                                        
1. Keys/descrip:"Z" / "Super(Z)Modem"                                           
2. ACS required: "s50"                                                          
3. Temp. log   : *None*                                                         
4. <U>L log    : *None*                                                         
   <D>L log    : *None*                                                         
5. <U>L command: "SZMODEM PORT %P SPEED %B /LOCK %K RZ %F"              
   <D>L command: "SZMODEM PORT %P SPEED %B /LOCK %K SZ %F"              
6. Codes mean  :Transfer OK                                                     
7. <U>L codes  :(1)"0"    (2)"0"    (3)"0"    (4)"0"    (5)"0"    (6)"0"        
   <D>L codes  :(1)"0"    (2)"0"    (3)"0"    (4)"0"    (5)"0"    (6)"0"        
E. Environ. cmd: *None*                                                         
I. DL File list: *None*                                                         
C. Max DOS chrs:128   P. Log position: Filename: 0 - Status: 0                  
										
										

!. Type/protocl:Active - Batch protocol                                         
1. Keys/descrip:"Z" / "Super(Z)modem"                                           
2. ACS required: "s50"                                                          
3. Temp. log   : *None*                                                         
4. <U>L log    : *None*                                                         
   <D>L log    : *None*                                                         
5. <U>L command: "SZMODEM PORT %P SPEED %B /LOCK %K RZ "
   <D>L command: "SZMODEM PORT %P SPEED %B /LOCK %K SZ @%L"              
6. Codes mean  :Transfer OK                                                     
7. <U>L codes  :(1)"0"    (2)"0"    (3)"0"    (4)"0"    (5)"0"    (6)"0"        
   <D>L codes  :(1)"0"    (2)"0"    (3)"0"    (4)"0"    (5)"0"    (6)"0"        
E. Environ. cmd: *None*                                                         
I. DL File list: "%C\fi.lst"                                                    
C. Max DOS chrs:128   P. Log position: Filename: 0 - Status: 0                  
										
										
Hope this helps a little bit...

		
		     Nicholas Colella, 
				SysOp Crester's Files BBS
				Renegade 1.00