October 11, 1991


            Setup for DSI 9624LE+ Modem and Wildcat


    If you have been lucky enough, as I, to have put enough
    money together to purchase one of the truly great Digicom
    Systems Inc. 9624LE+ modems, you may have found some
    difficulty in getting the thing to work with wildcat when
    low speed callers attempt to log in so here is what I
    have found to work.

    All external switches are left in the factory default or
    UP settings.

    My initial init setting with WC2.xN was as follows:

    1. Comm port: 2
    2. Max seconds to wait for carrier: 30
    3. Enter string to reset modem: ATZ
    4. Modem startup string #1: AT&F
    5. Modem startup string #2: ATV0 S0=0 M1 *F3 *M1 &W
                                         ^---^---(please
    note the symbol)

    6. na
    7. Reinit after every call: ATZ
    8. Modem off-hook: ATH1M0
    9. Modem on-hook string: ATH0
    10, 11, 12: delays 1,2 & 3: 2500
    13. Delay before prelog file: 1500
    14. init port at: 38,400
    15. Lock DTE: Yes

    Now comes the fun part,  from any comm programs terminal
    mode type AT*O (letter not number) and you should get the
    following:

    MODEL: 9624LEP
    DTE SPEED = 38400 BPS
    DTE PARITY = SPACE
    IDLE MODE

    E1   K1   L2   M1   Q0   V1   X4   TONE
   &B0  &C1  &D2  &H1  &L0  &M0  &R2
   *A0  *D0  *E9  *F3  *G1  *H0  &M1  *N6 *P0 *Q1 *S1 *T1 *U0

            (cont on page 2)



                                  PAGE 1






             (cont from page 1)

   S00=002  S04=010  S08=002  S12=050  S16=000  S22=234
   S27=072 S01=001  S05=008  S09=000  S13=008  S18=000
   S23=023
   S02=043  S06=002  S10=003  S14=155  S20=000  S25=000
   S03=013  S07=045  S11=000  S15=013  S21=004  S26=000

   DTR*  DSR*  RTS*  CTS* DCD_


   I have tested this setting as low as 1200 baud (the modem
   doesn't support 300 baud or less) and have found it to
   work flawlessly in both the native wildcat mode as well as
   with both DBridge and Frontdoor acting as frontends for
   mailers.

   A few of the features of this modem is that it is
   available in either internal, external or rack mount,
   allows for both Synchronous or Asynchronous
   communications, allows for both send and receive group III
   FAX and supports V.32bis, v.32, v.42bis and v.42

   DSI is offering this modem at a SYSOP discount so look up
   a dealer in your area or if none can be found you might
   give me a call.....happy BBSing.

   Don "Doc" Schmidt
        SYSOP
   Moore's =PRO= System BBS
   Node-1 (405)799-2043  12-19,200 USR HST
   Node-2 (405)799-4085  12-38,400 v.32bis
   Node-3 (405)799-3015  3-2400 baud
   Fido Net 1:147/13



                                  PAGE 2