ANTHONY ALBRICH'S
                        INSTALLATION GUIDE FOR OS/2
                  IF YOUR RUNNING A BULLETIN BOARD WITH OS/2
                 EXAMPLES>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
       (1) These file should help you with OS/2.I suggest you also buy the 
     OS/2 Reference manual (it's only about 35 bucks)
       (2)The the listing of files i have done are (AUTOEXEC.BAT)(CONFIG.SYS)
    The changes i made, should help out a alot!.If these don't work you really
   should read the Reference manual and get the right specifications out of that 
   book.If you don't have a book at this time and you need to get the darn thing 
   up,what you would have to do is number #1


              MAKE NOTE THAT IF YOU PUT THESE FILES IN YOUR ROOT DIRECTORY
              THATS ALL YOU NEED TO DO, UNLESS YOU HAVE OTHER PROBLEMS WITH YOU
              SYSTEM.BUT THESE DO HELP WITH MAKING EVERTHING RUN NICER IN OS/2.
              THANK YOU 
                                     
                                     [ANTHONY ALBRICH]
           OWNER OF THE HITCHERKILLER BBS, ALMOST READY TO OPEN UP TO OPERATERS
                 TWO LINES AND WILDCAT SOFTWARE RUNNING WITH 1.7 GIGABYTES
         [1] Use VMDISK to make a start up disk.
         [2] You need to be in a OS/2 Fat system DOS PROMPT  C:\>[OS/2]
         [3] Put your startup disk in drive A: or B: and make sure you put
         this line down.
         [4] VMDISK A: C:\DOS50.IMG
         [5] After creating this file in the ROOT dir. You need to follow this


         [1] Go to the file you would like have work example(WILDCAT.EXE)or(GAP.EXE) 
         [2] Make sure before you go to your file you need to first startup your [DRIVES]
         in your OS/2 SYSTEM ICON VIEW.And make sure you go to C:\> (drive) but not C:\>
         prompt ok you got this you will if you follow?.
         [4] Then after you get to your specified file
         [5] Click your left button of your mouse on the icon on witch you need to run. 
         [5] Go to the SESSION SETTINGS.
         [6] After you go to setting there should pop up a box on your screen.
         [7] Now go to the second page.
         [8] When you get to the second page then go to [DOS SETTING].
         CLICK YOUR MOUSE ON DOS SETTING.right button ok.
         [9] Then make sure you put your com port setting at [ON].
         [10] After you get that done then.
         [11] You need to go to the DOS_STARTUP_DRIVE.
         [12] Ok now chick it.Right button.
         [13] Now go up to the [BOX] that opens at the top of the SCREEN.Alright your
         almost there now......
         [14] Now put this line in the box [C:\DOS50.IMG].Upper right hand corner.
         [15] Now you have your Image file all done.
         [16] Now go to the [IDLE_SECONDS] and change it to [20]
         [17] And after you do this go to your
         [18] [IDLE_SENSITIVITY and then put that to [100]
         
                                        And do remember to make sure you
                   follow this step if you having problems with other files that just don't
                seem to work with OS/2. If you have followed these steps and installed the [CONFIG.SYS]
          AND [AUTOEXEC.BAT] in your main ROOT directory your done and you need to REBOOT your
          computer now.I hope for the best that this does work correctly for.


                        /////////////////////////////////////////////////////////          
                        //    If you have any question just call me and give   //
                        // me a message at this BBs 375-6332 P.S.THIS ISN'T    //\\
                        // MY BULLETIN BOARD.i just use it for messages        //\\
                        //And do remember my name is [TONY ALBRICH] USE THIS   //\\
                        // NAME PLEASE.If YOU LIVE OUT OF STATE USE   1-{503}  //\\
                        //////////////////////////////////////////////////////// \\
                            \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\