>>>>>>>> CW Pileup  trainer   Ped.exe   Ver 4.08i  by JE3MAS <<<<<<<<
           Copyright(C) 1993 by MasIII H.Kozu

   /*  This is a free software.   It can be freely distributed.  */

  *---------------------------------------------------------------*
  | This is a pileup trainer for IBM PC and Sound Blaster users.  |
  | You can run a 9 station pileup as long as you like.           |
  | 18 stations when using Sound Blaster PRO                      |
  |                     or Pro Audio Spectrum 16!!                |
  | 1 station with beep sound for users without sound card.       |
  *---------------------------------------------------------------*


*****  Reference *****

<<running ped>>
                Ped [-prn][-pro|-pas]
                      ;-prn    Selects Printer port for connecting Paddles.
                               (Default is Joystick port on your Sound Blaster)
                      ;-pro    For Sound Blaster PRO users.
                      ;-pas    For Pro Audio Spectrum 16 users.
                      
<<Sound Blaster Base I/O address>>
                default ;   220h
                You can select 240h I/O address by using the following:
                                
                    SET BLASTER=A240 I7 D1 T2  
                    (As for 'BLASTER' , See Sound Blaster Installation Guide )


<<MVSOUND.SYS Driver (for PAS16 users)>>
                Pro Audio Spectrum 16 users must insert a line like

                   DEVICE=C:\PROAUDIO\MVSOUND.SYS D:3 Q:7

                in your CONFIG.SYS file in order to load MVSOUND.SYS driver.

                (Refer to PAS16 user's guide for more information about
                 MVSOUND.SYS driver.)  


<<Keys equivalent to CT>> 

      HOME,CTRL-A        :Start of field
      END,CTRL-E         :End of field
      BS, CTRL-H         :Backspace
      DEL,CTRL-D         :Delete character
      CTRL-K             :Delete to end of field
      CTRL-W             :Delete field
      Right Arrow,CTRL-F :Forward character
      Left Arrow,CTRL-B  :Backward character

      Alt-F8,Alt-W       :Wipe QSO
      Alt-F9             :QRS
      Alt-F10            :QRQ
      Alt-Q              :Quit

      F1                 :Send CQ message
      F2                 :Send exchange message
      F3                 :Send confirm message
      F4                 :Send my call
      F5                 :Send his call
      F6                 :Send cl?
      F7                 :Send ?

      return,CTRL-M      :Log QSO
      Ins                :F5 and F2
      ESC                :Panic stop
      +                  :F3 and Return
      Spacebar           :Toggle call and No.(Only for CT trainer)

      shift+F1           :Set F1 message
      shift+F2           :Set F2 message
      shift+F3           :Set F3 message
      shift+F4           :Set F4 message
      shift+F6           :Set F6 message
      shift+F7           :Set F7 message


<<Keys not equivalent to CT>>

      CTRL-I               :Change input mode(insert[default]/overwrite)
      CTRL-R               :Reverse Paddle dot and dash
      Upward Arrow         :QRQ (coarse)
      Downward Arrow       :QRS (coarse)
      shift+Upward Arrow   :QRQ (fine)
      shift+Dwonward Arrow :QRS (fine)
        
      alt+Upward Arrow,
      shift+f9             :Tone pitch adjust
      
      alt+Downward Arrow,
      shift+f10            :Tone pitch adjust
      Pg Up                :Tuning dial (up)
      Pg Dn                :Tuning dial (down)


<<Text commands you can use>>

      QUIT           Quit and return to menu
      CORRECT        Adds hiscall to confirming message when you make
                      any correction.
      NOCORRECT      Disables CORRECT


<<How to connect Paddles or Keyer>>
  You can choose one of these.

  *Printer port                        Paddles/Keyer

      Pin 12(Paper End) -------------  Foot SW
      Pin 13(Select)    -------------  Dash/Keyer
      Pin 15(Error)     -------------  Dot
      Pin 18(Gnd)       -------------  GND

  *Joystick port                       Paddles/Keyer

      Pin 2   -----------------------  Dot
      Pin 4,5 -----------------------  GND
      Pin 7   -----------------------  Dash/Keyer
      Pin 10  -----------------------  Foot SW


<<Data file>>

 Ped has so simple data structure that you can make your own data easily.
 
 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 |<---  CALL SIGN  ---->|  |<------>| 
                               |
                               +------ CONTEST NUMBER

 Extension must be '.PED'.(ex. ARRL.PED)


(CT is  real time contest logging software written by Ken Wolff, K1EA)
(Sound Blaster/Sound Blaster Pro are trademarks of CLEATIVE LABS,INC.)
(Pro Audio Spectrum 16 is trademark of MEDIA VISION.)

I will not store any effort to help you with any problems you may have.
If you find any bugs, please send me a report. Thank you!


JE3MAS
MasIII H.Kozu
room 906,10-20,Chuo 3-chome,
Joto-ku,Osaka,536
Japan