The ROSE X.25 Packet Switch is the most advanced Packet
Radio Packet Switch available.  It has been in development for
over 3 years and is based upon almost a decade of experience in
the communications industry.  It is based upon the international
standard for data communications, CCITT X.25.  This fact has made
acceptance of it's use very quick and easy in every country where
the regulators have been asked, over a dozen to date.

     This fact may not seem important at this time.  As true
International Networking, not just systems forwarding mail but a
Global interactive network develops the regulators will become
more interested in the activities.  If the networks are running
with the protocols that are used in the commercial networks, then
the regulators will not panic and have a knee-jerk reaction.  In
many countries ALL data going in-to or out-of the country Must go
on an X.25 connection.

     The ROSE X.25 Packet Switch is available for Amateur use
from many sources, the file GETROSE.DOC in ROSEDOC.ARC describes
where and how.  It is requested that all groups using the
software register to enable coordination of network growth and to
provide input to the development of new features.

     The following services can be provided:

     Pre-Programmed EPROM, default parameters....... $ 25.00 each

     Pre-Programmed EPROM, modified defaults........ $ 30.00 each

     Initial Configuration, (see attached form)..... $ 10.00 each

     Back-to-Back Cable - 2 Port ONLY............... $ 15.00 each

     Back-to-Back Cable - Up to 8 Ports, expandable. $ 12.50/Port
     (Specify TNC and Connector)

     Installation and Modifications (CALL)

     Registration (Includes manuals and binder)..... $ 25.00

     Include functioning Net/ROM EPROM (one per callsign) and
     receive a $10.00 discount.

     On EPROM orders include EPROM (27256) and receive $ 5.00
     refund if it could be reprogrammed.

     Send Orders to:

     Thomas A. Moulton, W2VY
     9 Rosalie Ave, #1
     Clifton, NJ 07011
     (201) 478-7919






              ROSE X.25 Packet Switch Registration
                       and Information Form

Name:__________________________    Callsign:______________

Address:_______________________

State:_________________________    Zip:____________

Home Telephone:  (     )
Office Telephone:(     )


How did you find out about the ROSE X.25 Packet Switch?




Are you currently using and/or testing any other networking?



If so, what kind and how many?
(Digipeaters, NetROM, TheNet, or others)



What TNC's would you like to see supported?


What features do you find most useful?




Are there any ROSE Networks near you that you are aware of?





Comments:






Please complete and mail to:

Thomas A. Moulton, W2VY
9 Rosalie Avenue, #1
Clifton, NJ 07011-1906
(201) 478-7919





           ROSE X.25 Packet Switch Configuration Form
          
Fill out the following information for each switch the
configuration requested for.

Switch Callsign:_______________
Digipeater Callsign (or SAME):_____________

Location (City):______________
Network Address:______________ or
Area Code: _____ AND List of exchanges for Location:_____________


Type of TNC to be used (TNC-2/DR-200/AEA/etc):_________

Information about other switches in the area:
(Send copy of .CNF file if able)

Switch Callsign [Via]  Location       Address Port (RF or RS-232)







Information about services within the network:
(BBS, Gateways to NetROM or KA-Nodes)

Callsign [Via]    Type    Network Address   Notes




Phone Number for additional questions, specify best time to call.



A map of the network would also be very useful, include notation
of different RF channels.