The following is a screen capture of my modem configuration screen for a
U.S. Robotics HST 14.4k baud class modem (communications are not locked):

                   << Modem Communications Configuration >>

!. No call reinit time: 30 minutes
A. Com-port number    : 1
B. Carrier Detect Mask: 128  (Non-FOSSIL only)
C. Wait modem speed   : 9600 (Variable)
D. Use FOSSIL driver  : Yes (Full buffering inactive)
E. Modem initialization string:
   "ATC1E1H0M0Q0V0X6|~AT&B0&M4&Y3S0=0S2=1S7=50S10=10"
F. Modem answer string      : "ATA"
G. Modem hangup string      : "~~~~^A^A^A~~~ATH0"
H. Modem offhook string     : "ATM0C0H1"
I. Modem after hangup string: "ATM0C0H1"
J. Modem result codes:
               Case 1            Case 2
   OK        : "0"
   RING      : "2"
   NO CARRIER: "3"
   300       : "1"               ""
   1200      : "5"               "15"
   2400      : "10"              "16"
   9600      : "13"              "17"

Modem: (!,A-J,Q=Quit):


-------------------------------
Switch settings are as follows:

Quad  01  02  03  04  05  06  07  08  09  10
 UP   UP  UP  DN  UP  DN  UP  UP  DN  DN  UP


-----------------------------------------------------------------------------
At power up, my modem settings (ATI4) are as follows.  You may need to change
you NRAM settings to match these if you are having trouble:

ati4
USRobotics Courier 14400 HST Settings...

   B1  C1  E1  F1  M0  Q0  V1  X6
   BAUD=9600   PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER

   &A1  &B0  &C1  &D2  &G0  &H1  &I0  &J0  &K1
   &L0  &M4  &N0  &P0  &R1  &S0  &X0  &Y3  

   S00=000   S01=000   S02=043   S03=013   
   S04=010   S05=008   S06=002   S07=060   
   S08=002   S09=006   S10=010   S11=070   
   S12=050   S13=000   S14=000   S15=000   
   S16=000   S17=000   S18=000   S19=000   
   S20=000   S21=010   S22=017   S23=019   
   S24=150   S25=000   S26=000   S27=000   
   S28=008   S38=000   

   LAST DIALED #: 

OK


----------------------------------------------------------------------
HST's do change between versions a little, here's my configuration
profile (ATI7) if you are still having problems.  Check the dates from
your modem to see if it's much older or newer:

ati7
Configuration Profile...

Product type           External
Options                HST
Eprom                  64k
Ram                    8k

Supervisor date        09/29/89
IOP date               12/19/88
DSP date               09/18/89

Supervisor rev         1.2
IOP rev                1.0
DSP rev                2

OK

Good luck, and don't burn up those phone lines too much <grin> ...

My BinkleyTerm configuration file should be up for download if you are
planning to set up TAGMail.  The modem initialization strings for the
differ slightly.

Victor Capton
*A*R*T*H*U*R* BBS (1:120/120)
(313)-879-2318 - 300/1200/2400/9600 HST!