  Use arrowkeys and HOME, END, PgUp, PgDn to review HELP.
               Any other key will exit HELP.
------------------------------------------------------------

KEY    NAME        FUNCTION IN DESK CALCULATOR

X      Sign        Changes the sign of the number in the
       Change      display area.  If the number is positive
                   it becomes negative; if negative, the
                   number becomes positive. If you have just
                   pressed the = to display the accumulator,
                   the accumulator's sign is changed.

C      Clear       Clears the accumulator and subtotal to
                   zero.  If a number is entered without
                   being preceded by an operator
                   (+, -, *, /), the entered number replaces
                   the current accumulator and subtotal.
                   For instance, the following sequences
                   produce the same result:
                        a)  C + 1 =
                        b)  1 =

CE     Cancel      Cancels memory function or clears display
       Entry       area.  After you have pressed a memory
                   function key or an operator, the clear
                   key (C) changes to the cancel entry key
                   (CE).

                   If cancelling a memory function
                   (L, T, F, A, E), the key image on the
                   screen stops flashing and the CE key
                   reverts to the C key.

                   If cancelling a number after you pressed
                   an operator key (+, -, *, /), the number
                   in the display area is discarded and the
                   number in the accumulator is displayed.
                   Note that while entering a number, BkErs
                   key to discard the last digit entered.

^       Raise      Raises the accumulator to the power
        to         entered following the ^ key. 
        Power      To square a number, enter: ^2=
                   To take the square root, enter: ^2I=

I       Inverse    Changes the number in the display area to
                   1/number.  If the number in the display
                   area happens to be the accumulator (just
                   after an =), the accumulator is changed.

%       Percent    Multiplies the number in the display area
                   by the accumulator and divides the result
                   by 100.  Valid only when entering a
                   number preceded by an operator.

/       Divide     Divides the accumulator and subtotal by
                   the number entered following the /.

*       Multiply   Multiplies the accumulator and subtotal
                   by the number entered following the *.

+       Add        Adds the number entered following the +
                   to the accumulator and the subtotal.

-       Subtract   Subtracts the number entered following
                   the - to the accumulator and the
                   subtotal.

=       Equal      Displays the current total stored in the
                   accumulator.

S       Subtotal   Displays and clears the current subtotal.
                   The subtotal is automatically changed as
                   the accumulator is changed.

Ln      Label      Activates memory labeling mode.

Tn      To         Moves number in display area to memory
        Memory     area n.
        Area n

Fn      From       Moves number in memory area n to the
        Memory     display area.  If the current display is
        Area n     the accumulator (after an =), the
                   accumulator is replaced.    

An      Add to     Adds number in display area to the number
        Memory     store in memory area n.    
        Area n
           
En      Exchange   Exchanges number in memory area n with
                   the number in the display area.  If the
                   current display is the accumulator
                   (after an =), the accumulator is
                   exchanged.

[THE COMMAND MENU]-----------------------------------------

Pressing the ESC key causes the desk calculator selection
menu to be displayed over the desk calculator. 

Memory display     Toggles display of memory areas.  If
                   memory display is ON, the memory areas
                   are shown to the left of the calculator.

                   Notice that memory area-0 contains the
                   subtotal.  You cannot perform any memory
                   functions with memory area-0 (subtotal).

Initialize memory  Removes all labels on the memory display
                   and sets memory areas 1 through 9 to "0".

Tape display       Toggles display of the "paper" tape.  If
                   tape display is ON, the tape is shown to
                   the right of the calculator.

Clear tape         Clears tape and places the date and
                   current time at the top of the page.

Print tape         Prints the tape.

Review tape        Activates review tape mode.
                   (See Review Tape Mode.)

Write tape         Writes the tape to disk or diskette.
                   When selected, the desk calculator asks
                   you to name the document into which the
                   tape is to be saved.

Start tape         Places the date and time at the beginning
                   of the tape.

Form feed          Advances the paper in the printer to the
                   top of the next page.

Auto-print         Toggles sending a history of all
                   non-memory area activity directly to the
                   printer.  When auto-print is activated, 
                   the date and time are printed.  Arithmetic
                   operations performed on the calculator
                   are printed immediately.

