Date: 09-23-91 (09:49)              Number: 6403 of 6452
  To: JACK LEMLEY                   Refer#: 6386
From: QUARTERDECK TECH                Read: NO
Subj: EXCEPTION #13                 Status: PUBLIC MESSAGE
Conf: TECH SUPPORT (1)           Read Type: GENERAL (+)

-> I am getting exception #13 when attempting to format a disk.
-> My config.sys file consist of:
-> device=c:\qemm\qemm386.sys ram
-> dos=high

Usually when a person is getting an Exception #13 or other when they are
doing disk formats you need to add the parameter NRH to the QEMM line.
This will stop QEMM from putting small Ram holes in the ROMs.

Quarterdeck Tech

(50 min left), (H)elp, End of Message Command?







Date: 09-24-91 (09:20)              Number: 6423 of 6452
  To: JOHN CAMPBELL                 Refer#: 6376
From: QUARTERDECK TECH                Read: 09-25-91 (02:44)
Subj: QRAM 2.0                      Status: PUBLIC MESSAGE
Conf: TECH SUPPORT (1)           Read Type: GENERAL (+)

-> Will Qram 2.0 move ROM blocks to make more room
-> for TSR's, etc. in the Upper Memory Area?  QEMM 6.0 does this
-> using what Quarterdeck calls "stealth" technology.

No, Qram 2.0 will not move the ROMs.  This is exclusive to QEMM and I
don't think that it is possible, at least right now, to move the ROMs on
a 286 or lower.

Quarterdeck Tech

(47 min left), (H)elp, End of Message Command?








Date: 09-24-91 (15:21)              Number: 6443 of 6452
  To: JOHN SHEPHERD                 Refer#: NONE
From: QUARTERDECK TECH                Read: 09-25-91 (00:13)
Subj: QEMM 6.0 / WINDOWS 3.0        Status: PUBLIC MESSAGE
Conf: TECH SUPPORT (1)           Read Type: GENERAL (+)

The problem is due to a few minor things in your config.sys file.  To
make it easier I have written how your config.sys file should look minus
the REMed out lines additions are the lines with an *:

*  DEVICE=C:\QEM\QEMM386.SYS R:4 nosh ram ST:M X=C800-CBFF DB=10 FR=CC00
   SHELL=C:\NU\NDOS.COM C:\NU /s:bd: /U /P
   LASTDRIVE=D
   FILES=30
*  BUFFERS=8
   STACKS=0,0
   FCBS=16,8
   DEVICE=C:\QEM\LOADHI.SYS /R:1 C:\DOS\SETVER.EXE
   DEVICE=C:\QEM\LOADHI.SYS /R:4 C:\UTIL\VGAUTIL\VANSI.SYS
   DEVICE=C:\QEM\LOADHI.SYS /R:1 C:\DOS\EGA.SYS
   DEVICE=c:\qem\loadhi.sys /r:1 c:\UTIL\ADAPTEC.DVR
   DEVICE=C:\QEM\LOADHI.SYS /R:1 C:\NU\KEYSTACK.SYS
   DEVICE=C:\QEM\LOADHI.SYS /R:1 C:\DOS\RAMDRIVE.SYS 1600 /e
(44 min left), (H)elp, More?

   DOS=HIGH
*  DEVICE=C:\NU\NCACHE.EXE  /INSTALL /USEHI=OFF  /USEHMA=OFF

The only problem that I could come up with on the buffers.com problems
is that the file may not exist.  Make sure that the file Buffers.com is
in the QEM directory.  You may also to save memory take out the
DOS\Graphics line if you do not to screen prints with graphics in them.
Also if you have problems in losing the mouse you should load the mouse
driver after the DISKMON statement.


Quarterdeck Tech

(43 min left), (H)elp, End of Message Command?