Thank you for trying VCR 1.0, the complete videotape library database!
I'm sure it will fill your videotape library needs.

To run VCR 1.0 you must have the following:
     - An IBM PC, XT, AT, PS/2, or 100% Compatible
     - An IBM DOS 2.0 or higher operating system
     - At least 512KB of memory
     - A printer (assuming you want to print reports or labels)

Copy all of the files to the directory of your choice!  
 -- OR --
If you have a hard drive (C:) and want "VCR 1.0" to install the program 
for you, then type a:\installA "Enter" if the program is in the "A" drive, 
or type B:\installb "Enter" if the program is in the "B" drive. This will
create the directory "C:\Video", and copy all of the files to that directory.
You only have to install once. After that just go to the directory and 
type "VCR" "Enter". 
In order to use the install program you must have all program files on 
ONE (1) disk. They won't all fit on a low density 5 1/4" floppy.

NOTE: IF YOU ALLREADY HAVE A DIRECTORY C:\VIDEO, DON'T USE THE INSTALL 
      PROGRAM. IT MAY OVERRIGHT FILES ALLREADY IN THAT DIRECTORY!

This program has undergone rigorous testing and had no reported errors.
However, I (Robert H. Bennett) shall not be liable for any damages, including
but not limited to, direct, indirect, incidental, or consequential damages. 
Any use of this program is strictly at your own risk. Please don't let this 
disclaimer scare you, it is standard practice for all programmers.

If you have any questions or wish to order a copy of VCR 1.0, please feel
free to contact me at:

Robert H. Bennett
Montco Design
2098 Butler Pike, #N-23
Plymouth Meeting, PA  19462

(215) 941-0418

Note: If you are ordering a copy of VCR 1.0, please send $15.00 (Made payable
to Robert Bennett) and be sure to include your name and address so I know were 
to ship it, and the type of media. 
Example: 5 1/4" 360K -or- 5 1/4" 1.2M -or- 3 1/2" 720K -or- 3 1/2" 1.4M.