7/22/92        ΙΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝ»
               Ί    HOW TO SEND PAGE SIZES OTHER THAN 11"   Ί
               ΘΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΝΌ

FAXPOP version 1.20 and higher using Epson emulation can send any length of
page that the application can produce.  Just set the page length in your
application and FAXPOP will duplicate it on the receiving fax machine.
This comes in handy when sending short messages to fax machines that use
roll paper.

If your FAXPOP version is lower than 1.20, you can upgrade by calling the
nearest Intel FaxBACK Service with your touch-tone phone.  Order document
0011 if you have a SatisFAXtion board or 0013 if you have a Connection
CoProcessor.  Make sure your fax board is ready to receive when you call
because FaxBACK will usually begin transmitting your order immediately
after you hang up.

FAXPOP 1.40 and higher using HP emulation support a limited number of page
lengths just as a laser printer supports a limited number of page sizes in
its paper trays.

PAGE SIZES SUPPORTED BY EPSON EMULATION

FAXPOP's Epson emulation supports an unlimited number of page lengths.
Intel used WordPerfect to successfully test these page lengths: 4, 5.5, 11
and 14 inches.  Set FAXPOP to Epson emulation when you need to fax a
non-standard paper length.  Be sure to set your application to print to an
Epson printer also!

PAGE SIZES SUPPORTED BY HP EMULATION

FAXPOP's HP emulation supports only these page lengths: 11, 14, and 11.69
(A4 size).  These are the same sizes supported by the HP Laserjet's paper
trays.  Set FAXPOP to HP Emulation when using standard paper lengths.  Be
sure to set your application to print to an HP LaserJet II/III also!