ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
º TommySoftware CAD/Draw Version 1.10 (Mailbox release)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Current version

This version 1.10 of TommySoftware CAD/Draw was release on March 1, 1993.
There might be a newer release available today. You can get information
concerning the current version where you got this program from.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Installation

In order to install TommySoftware CAD/Draw, you will need at least the files
TSCD_A.LZH .. TSCD_D.LZH and possibly the files SETUP.BAT and SETUP.TXT
included in TSCD_A.LZH.

There are two ways to install TommySoftware CAD/Draw:

1. If you have the PATH variable pointing to LHARC (at least version 2.0),
   you can simply copy the files TSCD_?.LZH and SETUP.* into any directory,
   change the current path to that directory and then type

     SETUP C:

   This will install TommySoftware CAD/Draw in a directory named TSCADRAW on
   the harddisk partition C:. You may enter a different partition than C:,
   but this will result in invalid default settings of TommySoftware CAD/Draw.
   In this case, use the command EDIT > EDIT SEARCH PATHES in order to set the
   pathes correctly. Save the edited pathes using the command EDIT > SETTINGS >
   SAVE AS... in a file named TSCADRAW.MPI in the directory TSCADRAW. They will
   then be loaded automatically each time the program is started.

2. If you do not have LHARC pointed to by the PATH variable, you will have
   to unpack the files on your own. But in this case, before installing,
   please read the file SETUP.TXT, which contains some information about
   TommySoftware CAD/Draw. Then, in order to install, type

     x:\...\LHARC x /r TSCD_B.LZH c:\
     x:\...\LHARC x /r TSCD_C.LZH c:\
     x:\...\LHARC x /r TSCD_D.LZH c:\

   where x:\...\ is the path, where LHARC is located. This will result in
   the same installation as point 1. It might be necessary to type a path in
   front of the LZH's names, so that LHARC can find them.

   ( If you do not have a LHARC yet, you will surely find one in the Mailbox
     from which you received TommySoftware CAD/Draw. To find it there, search
     for the keywords ARC, LZH and/or LHARC. )

Please do ONLY register at your local shareware dealer. He will also answer
your questions concerning TommySoftware CAD/Draw. You can find his address in
the registration form that you can call with the command HELP > REGISTER.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Support via COMPUSERVE 

Questions concerning the installation and technical questions can be mailed
to TommySoftware via CompuServe 100020,3647. Before sending a mail, you should
download the file TSCDQA.ZIP from the GRAPHICS SUPPORT forum (GO GRAPHS) in
Library Section 5, Paint Programs. This file contains the current Questions-
and-Answers document build on all previous questions. In this location, you
will also get the answers to your own questions. Due to this way of answering,
your mail will be made public when answered! You should keep this in mind when
creating your mail.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  ATTENTION!                                                              ++
++  The content of this disk may not be altered. The software must not be   ++
++  used or passed on outside the stated country. The software may only be  ++
++  passed on if the price of the diskette copy does not exceed 5.- US$     ++
++  resp. the equivalent value in the local currency. All trademarks must   ++
++  not be used without permission.                                         ++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

As of February 1993