F3PADLK for FALCON 3.0 version 3.02

                        By: Ken "Stinger" Richardson
                            UID: [70761,301]

        F302PAD is a terminate and stay resident program that will add small 
indicator lights to Falcon's Padlock and "Scrolled up" views. These lights 
indicate Afterburners, AirBrake, Radar, and ECM. Each indicator has it's own 
color for easy identification. 

No modification is required to the Falcon program. Simply run the F302PAD
program, or use LOADHIGH to load it into high memory. After F302PAD is loaded
it will automatically check to see if Falcon is running. If Falcon is running
it will automatically "attach" itself. If Falcon is not running, it will 
simply lay dormant in memory until it senses Falcon. To Uninstall F302PAD, 
just execute the F302PAD.COM program a second time. This will remove the TSR 
from memory.

F302PAD also has a feature that will allow you to remap your COM3 and COM4
ports to COM1 and COM2 respectively. This will allow people to connect with
Falcon, in one of the communications modes, using COM3 or COM4. To enable the
COM port remap feature, add the /3 or /4 switch after typing F302PAD. For
example: Type F302PAD /3 to remap COM3 to COM1
           or F302PAD /4 to remap COM4 to COM2

The F302PAD program uses roughly 900 bytes of memory and can be loaded HIGH 
with the LOADHIGH command, therefore saving precious conventional memory.

        This utility is not supported by Spectrum Holobyte in any way so if
you experience any problems contact me via Compuserve EMail or the MODEMGAMES
forum on Compuserve (GO MODEMGAMES).

                                        -Enjoy!

                                         Stinger

File list:
              F302PAD.COM - Padlock TSR itself. This file must be loaded before
                            running Falcon.
              F302PAD.TXT - This file.
       
              README.NOW  - A text file for your reading enjoyment