NOTES o This version of Pegasus was tested under OS/2 versions 2.0 with service pack 1 and service pack 2 applied and with OS/2 version 2.1. o In the event of a system trap, you should obtain fixes for the OS/2 2.0 SP 2 kernal or OS/2 2.1 kernal : APAR PJ09893 o OS/2, SPM/2, LAN Netview Manager are copyright of IBM Corporation. o Netware is copyright of Novell. We have found that a number of system traps have been corrected with the kernal update listed above. If you do experience a trap, apply the fix and test Pegasus, if the problem persists, please contact us at: (914) 277-4312 M-F 9:00AM - 5:00PM EST you can also leave a message on our BBS listed in the SUPPORT AND QUESTIONS section of this document. INTRODUCTION Pegasus Resource Monitor Version 1.0 Copyright (c) 1993 C.O.L. Systems Inc. All Rights Reserved Pegasus ( The Greek Myth ) A winged horse that with a stroke of his hoof caused the fountain Hippocrene to spring forth from Mount Helicon. Pegasus Resource Monitor ( The OS/2 Product ) A 32 bit application that with a click of a mouse causes a fountain of performance statistics to spring forth from Mount OS/2 2.x! Pegasus for OS/2 2.x is a kernal level, real-time, Presentation Manager monitoring tool for system and application resource usage. It features: o An SAA/CUA compatible interface. o Online hypertext help. o System Activity Display o Cpu, Irq, both percent busy and service counts o Page In, Page Out o Memory o Input Output Activity Display o By disk parition. o By printer. o By RS232 port. o Application Activity Display o Per process, Cpu, dispatch, page faults, I/O o Configuration options for setting application refresh and system update time. o Configuration options for setting auto-start of the various activity displays. Pegasus is distributed as Shareware. This means that users are encouraged, subject to restrictions described in the License Agreement, to share copies of this program with friends, associates and bulletin boards. Please remember that if you use this software you are required to pay the registration fee of $39.95 as described in the License Agreement. COPYRIGHT/LICENSE/WARRANTY Pegasus Copyright (c) 1993 by C.O.L. Systems Inc. - All rights reserved. License Agreement and Warranty Disclaimer You should carefully read the following terms and conditions before using this software. Use of this software indicates your acceptance of these terms and conditions. If you do not agree with them, do not use the software. Shareware Version You are hereby licensed to: use the Shareware Version of the software for a 21 day evaluation period; make as many copies of the Shareware version of this software and documentation as you wish; give exact copies of the original Shareware version to anyone; and distribute the Shareware version of the software and documentation in its unmodified form via electronic means. There is no charge for any of the above. You are specifically prohibited from charging, or requesting donations, for any such copies, however made; and from distributing the software and/or documentation with other products (commercial or otherwise) without prior written permission. Unregistered use of Pegasus after the 21-day evaluation period is in violation of federal copyright laws. Evaluation and Registration This is not free software. This license allows you to use this software for evaluation purposes without charge for a period of 21 days. If you use this software after the 21 day evaluation period a registration fee of $39.95 is required. Payments must be in US dollars drawn on a US bank, and should be sent to C.O.L. Systems Inc. 8 Overlook Way, Purdys, NY 10578. Quantity discounts are available, as described in the file ORDER.DOC. One registered copy of Pegasus may be dedicated to a single person who uses the software on one or more computers or to a single workstation used by multiple people. You may access the registered version of Pegasus through a network, provided that you have obtained individual license for the software covering all workstations that will access the software through the network. Governing Law This agreement shall be governed by the laws of the State of New York. Disclaimer of Warrantee This software and the accompanying files are sold "as is" and without warranties as to performance of merchantability or any other warranties whether expressed or implied. Because of the various hardware and software environments into which this program may be put, no warranty of fitness for a particular purpose is offered. Good data processing procedure dictates that any program be thoroughly tested with non-critical data before relying on it. The user must assume the entire risk of using the program. Any liability of the seller will be limited exclusively to product replacement or refund of purchase price. REGISTERED USERS Once registered you will have access to additional Pegasus Tools at no charge ( a $19.95 saving ) when available. These tools will include: o Cache Monitor - Monitor FAT and HPFS cache activity o Application Analyzer - Fully analyze thread and file activity for a single process. o IO Monitor - Monitor every file opened, read from or written to. Pegasus Tools will run as stand alone intensive trace utilities as they themselves are resource intensive. Registered users will be supported on the C.O.L. Systems Inc. technical support BBS. (see SUPPORT AND QUESTIONS ). In addition, you are entitled to all updates, changes, fixes, and enhancements to the Pegasus Resouce Monitor. SUPPORT AND QUESTIONS Technical support is available at no charge to registered users. To gain support, dial into our technical support BBS at: (914) 277-5863 (N-8-1) 2400 - 14400. If you have sent in the registration fee and log on for the first time, leave a message to the sysop and include your check or money order number. Once we have received your registration fee we will upgrade your user authority to access the Pegasus File and Message areas. C.O.L. Systems also frequents Compuserve OS2USER, OS2DF1, OS2DF2, and OS2AVEN forums: User ID 72261,2700 DISTRIBUTED BBS SUPPORT ----------------------- The following BBSs have setup support message and file areas: Pyramid/2 BBS (Palo Alto, CA.) (415) 494-7497 N-8-1 INSTALLATION System Requirements: o OS/2 version 2.0 SP 1 or later. Pegasus-related files are: o PEGASUS.TXT this file. o ORDER.DOC order form o Pegasus.EXE executable o Pegasus.HLP online help o Pegasus.Ico icon file o Osrm2Dcf.EXE Data Collector Management o Os2Dcf.Exe Data Collector o DcfApi.Dll Data Collector interface o Os2Com.Dll Common Collector Functions o Rm2Comm.Dll Communications class library o Rm2DefsB.Dll Common Collector Management Functions Additional BBS discount offers o PYRAMID2.DOC For Pyramid/2 BBS subscribing users. Installation: There are two parts to the installation process. The first is performed manually before running Pegasus. The second part is run from the Setting dialog. This dialog box is displayed the first time Pegasus is run, and can be rerun from the Configuration pull-down menu. One time installation procedure: 1) If you already have installed a previous version of Pegasus, delete all files in your Pegasus directory. Otherwise create a directory to hold the Pegasus related files. For example, "C:\Pegasus". 2) Copy all Pegasus-related files to this directory. Note: there is no need to include the directory containing Pegasus related files in your LIBPATH= or HELP= paths if you set up a program object that uses the installed directory as the working directory. 3) Run Pegasus.EXE, either by double clicking on Pegasus.EXE as a program object or by entering START Pegasus at the the OS/2 system prompt. The first time you run Pegasus it will bring up the Settings dialog box to complete the installation. Optional steps: a) Add the directory created in step one to your PATH. If you don't add the directory to your path, you'll need to type the directory name when you start Pegasus from the command line (for example, you'll have to type "C:\Pegasus\Pegasus" rather than just "Pegasus"). You will also need to add the directory to your LIBPATH= and HELP= ERROR HANDLING Pegasus creates a log file called DCF.LOG in the Pegasus directory, or where the process is run from. In the event of any errors or invalid measurements, this file may be usefull in resolution. If you do experience errors and the file is preserved, please upload it to the technical support bbs. FUTURE ENHANCEMENTS Ideas for future enhancements include: o Printing o LAN Req. monitoring o HPFS386 monitoring. o Support for IBM SPM/2 2.x collector. o Support for IBM LAN Netview Monitor Agent. Additional suggestions are welcome! NETWORK MANAGERS If you like Pegasus, you may like information on our Heterogenous Performance and Capacity Management System for Networks: Osrm2 Version 2.0. This product includes: Support for centrally collecting measurements from: OS/2 1.x OS/2 2.x Novell Netware ( in development ) Post processing report and graph generation Centrallized viewing console ( OS/2 2.x PM application ) And much more! If you are interested, download RM220.ZIP from our technical support BBS.