SETTING UP JQCALC FOR WINDOWS
	     Copyright 1994  John Q. Lavelle

DISCLAIMER

All users of JQCALC FOR WINDOWS must accept this disclaimer. If
you do not accept this disclaimer, do not install or use JQCALC
FOR WINDOWS.

The Licence Agreement and Warranty shall be construed, interpreted
and governed by the Laws of England and Wales. You may have other
rights that may vary from one Country and/or State to another.

"ALL VERSIONS OF JQCALC FOR WINDOWS ARE SUPPLIED AS IS WITHOUT
ANY WARRANTY OF ANY KIND. JOHN Q. LAVELLE SPECIFICALLY DISCLAIMS
ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. WITH RESPECT TO THE DISK AND THE PROGRAMS REPRODUCED ON
THE DISK, JOHN Q. LAVELLE SHALL HAVE NO LIABILITY WITH RESPECT TO
ANY LOSS OR DAMAGE DIRECTLY OR INDIRECTLY ARISING OUT OF THE USE
OF THE DISK OR ANY PROGRAMS REPRODUCED ON THE DISK, EVEN IF THE
AUTHOR, HIS AGENTS AND EMPLOYEES HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. WITHOUT LIMITING THE FOREGOING,
JOHN Q. LAVELLE SHALL NOT BE LIABLE FOR ANY LOSS OF PROFIT,
INTERRUPTION OF BUSINESS, DAMAGE TO EQUIPMENT OR DATA, INTERRUPTION
OF OPERATIONS OR ANY OTHER COMMERCIAL DAMAGE, INCLUDING BUT NOT
LIMITED TO DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
OTHER DAMAGES."

You make any changes to your system entirely and totally at your
own risk.

			----77----

Installing JQCALC

First you need to set up JQCALC to run on your computer.

Microsoft Windows version 3.0 or greater (from now on referred to
as Windows) must be installed on your computer.  For information
on installing and using Windows, please see your Windows
documentation.

Switch on your computer and monitor.

WINDOWS 3.0 users MUST use the file WIN30.BAT instead of SETUP.EXE.
If Windows 3.0 users use SETUP.EXE the files may not be properly
copied across and an error will occur reporting DDE problems.

1. Start Windows. If windows is not running, type  WIN  at 
   the command prompt (the  C:>  prompt) and press ENTER.

2. Open the Windows Program Manager window. If the Windows
   Program Manager window is not open, then double-click on
   the Program Manager icon, (or press CTRL+ESC to display
   the Windows Task List, then press the DOWN ARROW or UP
   ARROW key until the Program Manager item is highlighted,
   then press ENTER).

3. Insert the JQCALC for Windows program disk in your floppy
   disk drive (if you are using a 5 1/4 inch disk or a drive
   that has a door, then close the door).

4. From the Program Manager window, click on the word FILE
   to open the menu and click on RUN, (or press ALT+F, and
   press the R key).

5. In the Command Line box, type   A:\SETUP .
   (If you are using a different drive to drive A:, then
   type the correct drive letter instead of "A:".  e.g. If
   you are using drive B:, then type  B:\SETUP.)

6. Click on the OK button or press ENTER.

7. Once the Setup Program has loaded, a series of instructions
   is displayed on your screen, just select the options which
   best match your system and requirements.

8. For users of Windows 3.1 and better JQCALC will create it's
   own Program Group in your Program Manager window. Windows 3.0
   users will need to create their own Program Group. This is
   due to Windows 3.0 not having the file DDEML.DLL.

NOTES

   The Full Installation (recommended) copies ALL the required
   files to the JQCALC directory. The Minimum Install copies all
   the files EXCEPT for VBRUN300.DLL, DING.WAV and CHIMES.WAV.
   JQCALC will not run without VBRUN300.DLL in either the JQCALC
   directory or your \WINDOWS\SYSTEM directory. The .WAV files
   are optional.

   Check your \WINDOWS\SYSTEM directory for the file VBRUN300.DLL,
   be careful as you may have files with very similar names (i.e.
   vbrun100.dll or vbrun200.dll). If VBRUN300.DLL is not in your
   \WINDOWS\SYSTEM directory you must copy it from the JQCALC
   directory to your WINDOWS\SYSTEM directory. For more information
   on copying files see your Windows documentation or use this
   example from the DOS prompt.

   COPY C:\JQCALC\VBRUN300.DLL C:\WINDOWS\SYSTEM\VBRUN300.DLL

   No manual is supplied on the disk because the Help file is
   always more up to date and is recompiled every time there is a
   change in the program. If you require a manual then please use
   the Print option in the Help File FILE menu.

   If you experience any problems with any aspect of JQCALC,
   telephone 0900 870833 (or international +44 900 870833)
   or leave a message on CompuServe 73062,2642. Do NOT use these
   numbers for registrations.