Help file for SHEZSET.BAT Shezset 1.8d 3/6/95 ThunderBYTE 6.33 corrected a 'difference' that was noted in SHEZShow 1.3a. TBScan now works 'like other scanners' when the command line ends in \. ie, TBSCAN \BIN\ now scans files in the \BIN\ directory. Previously, TBSCan worked for the root directory only when ending in \. All subdirectory entries ending in \ would not scan any files. ThunderBYTE 6.33 release changed the way it works when *.* (actually any filespec.ext) is on the command line. It only scans the specified directory. It worked this way a long time ago. Sometime during the continued development of TBScan, this changed and TBScan scanned subdirectories of the current directory unless the NoSub (NS) switch was used. Well, they went back to only scanning the specified directory if there is a filespec.ext on the command line. This change negates the work around I used in 1.8c to scan ALLFILES using *.* on the command line. Since TBScan will NOT scan any subdirectories when *.* is used, I have removed the work around in SHEZSET.BAT. You must specify AllFiles in the TBAV setup file (and live with the pause) if you want to scan allfiles. Also my SHEZ.INI sample file removed the *.* from the uSer Menu command lines when scanning the specific directories. First, TBScan now correctly scans the files when paths end in \ (ie., \BIN\). Second, if *.* is on the command line then subdirectories are not scanned as expected which would not work with the way SHEZ uses subdirectories when scanning archives in archives. Shezset 1.8c 2/20/95 Using the Allfiles (AF) switch with ThunderBYTE paused a pause. Well, I found that I could specify the filespec.ext of *.* on the command line and then TBScan would scan allfiles without the pause. This change is in SHEZSET.BAT. It works just like the command for F-Prot. It simply checks if the 'item' to scan is a file (IF EXISTS %1) or a directory (IF NOT EXIST %1). Now TBScan can once again scan Allfiles. Shezset 1.8b 2/7/95 ThunderBYTE changed the operation of their Allfiles switch AF and caused it to PAUSE and wait for a keyboard input even if the Batch BA - No Input Required - switch was used. This causes the Scanning process to stop and wait for a key for each file that is scanned. I had to remove the AF switch from SHEZSET.BAT for the TBSCAN program to allow for 'hands free' operations of scanning files. Shezset 1.7a 11/7/94 Added /NOEXPIRE to the SCAN V117 Command line in SHEZSET.BAT. The program now gives the "out of date" message and pauses the computer each time it is called. Hopefully the NEW Scan 2.1.4+ will finally detect and clean all the viruses that V117 did. Then, maybe, we can all change over to the new program. Shezset 1.7a 11/7/94 Added /V to AVScan command line in SHEZSET.BAT. This causes AVScan to ONLY log filenames of INFECTED files (and not all files processed). Shezset 1.7 10/12/94 Added AVScan 1.84a Virus scanner switches to the SHEZSET.BAT file. This virus scanner has a very good detection rate, is fairly fast, and works extremely well from the command line (no menu system). The detection rate was better than Scan V117, Scan 2.1.2 on my small collection of sample viri. Changed the keyword CHECKOUT to CKOT when using SHEZSET. The file SCANIT.BAT is no longer created. The SHEZSET.BAT file creates SHEZSCAN.BAT or CKOTSCAN.BAT files directly. Changed the LOG file filenames from the individual scanners to a generic LOG (i.e. TBAV.LOG is now either SHEZSCAN.LOG or CKOTSCAN.LOG. The reason for this change was the fact that Shez only SEES the errorlevel set by the LAST virus scanner used. Thus three of the four virus scanners could report problems and the last NOT report any problems and the SHEZ.LOG file would NOT show any problems! Two new files are included in this archive (SHEZFAIL.BAT and CKOTFAIL.BAT). These files echo "FAILURE PROCESSING %1" statement into the SHEZSCAN.LOG or CKOTSCAN.LOG file if ANY virus scanner exits with an errorlevel > 0. -------end of changes------- SHEZSET.BAT creates a file named SCANIT.BAT using the BATCH "ECHO" command to send the correct drive:\path\filename.ext and command line options for your virus scanner. It can easily be changed for any different virus scanners if you understand the BATCH file language. SHEZSET.BAT defaults to copying the newly created SCANIT.BAT to C:\SECURITY\SHEZSCAN.BAT. SHEZSET.BAT will optionally, copy the newly created SCANIT.BAT to C:\SECURITY\CKOTSCAN.BAT file for the Checkout 2.0 program. (See the CHECKOUT.DOC file provided with the Checkout program for proper use of the CKOTSCAN.BAT file.) -- You will probably need to change the path names, file names and command line options in SHEZSET.BAT to match your virus scanner(s) name, locations and preferences. You will then need to configure SHEZ to use SHEZSCAN.BAT as your virus scanner. Set the memory entry in SHEZCFG to the MAX value required by your viri scanner(s) (if they require 286K, 411K, 395K then configure for 411000). Once this has been done you are ready to Viri Scan your archives with the best of the best Viri scanners. To use SHEZSET.BAT you just call it up like: SHEZSET # where # is: 1=ALL, 2=TBSCAN, 3=FPROT, 4=SCAN, 5=SCAN2 To use SHEZSET.BAT with CHECKOUT you just call it up like: SHEZSET # CHECKOUT (Note: You must use caps for CHECKOUT. There is not test for lowercase.) If you have GET 2.5 or 2.6, batch file enhancer, you can specify SHEZSET G and you will presented with a menu to select from. You can replace this with your own batch file enhancer if you wish to. ----- Shez Show 1.5a 8/18/94 ThunderBYTE Anti-Virus 6.23 was released recently. This version corrected one 'difference' that was documented as a possible problem in the SHEZSET.TXT file. No changes to SHEZSET.BAT file. Shez Show 1.5 7/11/94 No changes to SHEZSET.BAT file. ShezShow 1.4 6/30/94 McAfee Assts released their 2.1.0 Release Candidate virus scanner. They changed their switches and defaults. The 2.0 series was originally released for maximum protection by DEFAULT. The switch /STD was used to process ONLY standard executable and overlay type files. Well, they just reversed this. Now the default IS standard executables and overlay type files and a new switch /ALL is provided to process ALL files. This switch change was put into the SHEZSET.BAT ECHO commands to insure that the SHEZSCAN.BAT processes ALL files. To restrict the scanning to only Executable type files, use SHEZCFG to change that option in SHEZ.CFG. ShezShow 1.3a 6/20/94 Virus scanner differences. The four virus scanners I have used in this demonstration file work alike (almost). A few differences you should be aware of follows: As of F-Prot V2.12 this viri scanner is different from the other scanners in that you can NOT specify a filespec.ext AND the option to SCAN ALL FILES FOUND (/ALL) on the command line at the same time. However, you CAN specify a drive:\dir AND /ALL. For this reason, there is a test to see if you called the scanner and ended with a filename.ext or a directory name, and the SCANIT, SHEZSCAN, CKOTSCAN files use the correct command line. A second item in F-Prot concerns the length of the command line. On more than one occasion I have had F-Prot create a log file which was named wrong. The indications are that if the path + command line gets too long; C:\SECURITY\F-PROT C:\TEMP\CKOT.1\CKOT.1\CKOT.3 /ALL /NOMEM /NOBOOT /REPORT= C:\TEMP\FPROT.LOG /APPEND seems to do it; that everything past "C:\TEMP\F" gets cut off and F-Prot creates a log entry named C:\TEMP\F (without the append). Because of this, I rearranged the ECHO command in SHEZSET.BAT and moved /NOMEM /NOBOOT to the end of the command line. -- As of ThunderBYTE 6.23 this viri scanner (TBSCAN) has a difference that I felt that you should be aware of. The difference is the way the command line is interpreted if you end with a \ on the target. Other virus scanners will let you specify a path like: SHEZSCAN C:\TEST\ and they default to "*.*" as the filespec.ext. TBScan does NOT work that way. If you end the target with a "\" it will NOT scan any files! To correct this, I have specified *.* on the end of the uSer Menu entries in the SHEZ.INI file for virus scanning entries. ShezShow 1.2 4/27/94 I revised SHEZSET.BAT file that creates SHEZSCAN.BAT. SHEZSET.BAT can now setup SHEZSCAN.BAT for one or ALL of the four Viri scanners that I know about: ThunderByte 6.20, F-Prot 2.12, Scan V115, and Scan 2.0.2. Have fun and stay viri free. Darrell Bivens