FTS FileStats (c) 1995 W.C.C.S. v1.x 07/03/1995 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Data (941) 337-4950,5480 W.C.C.S. Fax (941) 337-7470 The Beach Board BBS Voice Mail (941) 278-2893 Written By: David Ward Internet: Sysop@tbb.com Fido: 1:371/1 or 8 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ * See the end of this file for Updates Notes * ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ FTS FileStats - What is It? ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ FTS FileStats is a program that is only of use to TBBS Sysops that are running TDBS and using FTSPRO (File Transfer System Prof.). FTS FileStats is a on-line file Statistics program written for FTSPRO. It will work with all versions up to v2.x. This product is not connected with Frontier Technology Systems Corp. but is solely written and support by W.C.C.S. on The Beach Board BBS. You also must be using the Profile setup that FTS Supports. This is discussed in your FTS Doc's. This TPG does not alter any FTS file. It does read them and gathers information ONLY, the files that are changed and updated are all FTS FileStats. The only setting in FTSPRO that should be on if you want the download counts tallied correctly is COUNT DOWNLOAD under Global Settings. This is the field that tells FTS to count the number of times that a file has been downloaded. We also assume that you are using the default directories that FTS uses to store it's data. Other than that, no other setting in FTS makes a difference. We just read away. FTS FileStats will take a Profile that you have defined, and let you and your users see just what is in each area. A listing of the fileareas in your profile will be presented, you pick the area whose stats you want to see. That area is displayed and logged. Logging? We felt that most sysops would want to know how many users and which ones were going into what areas. We at The Beach Board have close to 250,000 files now online. Using 36 CDROM drives and 15 Gigs of Hard drive space we have tons of files. We wanted users to be able to see what was in each area 'on the fly.' I wrote this program to do just that. The displays are as follows: 1 BYPOPREQ CD-ROM By Popular Request 1 D ON: ONLINE 2 AFILES1 CD-ROM The Arsenal Files 1 1 D ON: ONLINE 3 AFILES2 CD-ROM The Arsenal Files II 1 D ON: ONLINE 4 AFILES3 CD-ROM The Arsenal Files III 1 D ON: ONLINE 5 GAMERS CD-ROM The Gamers Arsenal 1 D ON: ONLINE 6 SWONLINE CD-ROM Shareware On-line 1 D ON: ONLINE 7 TECH-A1 CD-ROM The Tech Arsenal 1 D ON: ONLINE .... and so on.... Lets Pick Area 1 above: Area Description Files Bytes DLCnt [BYPOPREQ] 1 By Popular Request: Amiga Files #1 330 26,556,416 251 [BYPOPREQ] 2 By Popular Request: Amiga Files #2 215 24,228,864 75 [BYPOPREQ] 3 By Popular Request: Amiga Files #3 249 21,145,600 301 [BYPOPREQ] 4 By Popular Request: Amiga Files #4 278 22,786,048 25 [BYPOPREQ] 5 By Popular Request: Ansi Files 715 6,471,680 1,021 .... and so on.... [BYPOPREQ] 50 By Popular Request: Unprotects & Ch 1656 61,992,960 78 Total Files 11,519 using 623,467,520 bytes, or 594 MegaBytes. Average Filearea 12,469,350 bytes. Average file size 54,125 bytes. These files would fill up 435 1.44M Floppies or 1,731 360k Floppies! At 14.4k it would take 1,219 hours to download the files sent sofar, or 50.81 days downloading, 24 hours a day, 7 days a week nonstop. 1,487 Total Downloads. Run Stats again? (y/N) Screen pausing is handled, based on users more setting. Since we have the stats for each area, let's total them. The act of viewing logs what area is viewed. The user then has the chance to pick another area or exit the program. Very simple and to the point. Most of the work is being done by the program! Other than picking an individual filearea, a user can also pick M for the master file report at the opening screen. This report will total all of the fileareas in the given profile. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Setup And Installation ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The TPG will install itself. If you run the TPG file and the operating files are not found, it will start the installation process. During the first run, you will get a message asking if you are installing the program for the first time. You should find out the DOS profile name before you start and make sure you know the paths to your Userlog.bbs & FTSPRO Directories. Add a menu item like the following (Preferably on your file menu): Entry: Priv=0 KEY=^@ TYPE=200 Opt Data=D:\FTS_STAT\FTS_STAT /q This is what will call the program and run it 'normally'. NOTE: Make sure that YOU are the first person to run this program. The first user in the program will be asked the config information. You will be asked the following questions: 1 - Are you installing the Program for the first time or reinstalling the program? Answer Y 2 - What Privilege level do you wish to log? If you do not want anyone logged you would set this at a high value, but do not exceed 254. Setting this at 254 would not log anyone except the users defined as Sysops. BUT if you have the "log sysop" option set to "No", then it will not log the Sysops. I recommend that you set this value at 0 to get things started, after all, we all like log files and we want to know if users see and use a program we have. After a while you may want to turn this off. The log file is a small dbf file that should not get too large. When viewing the log file you have the option to erase it. 3 - Do you wish to have the Sysops logged when searching? Later you will give a Privilege Level which defines the Sysops, if a user has this level or higher and you answer Yes, they will be logged. If No, Sysops will not be logged. 4 - What is the Privilege level you want to be defined as a Sysop? Enter level 254 if you only want yourself to have access to the Sysop Functions. 5 - What is the Path to your Userlog.BBS file? This is used when you receive your key file BUT is also needed to run the demo. Enter the path i.e. C:\TBBS\ and make sure you enter the trailing \. 6 - Enter the path to your FTSPRO working directory. In most cases it is ?:\FTSPRO\ where ? equals the drive letter. For example, if your FTSPRO is on drive I and in the FTSPRO directory you would enter I:\FTSPRO\ with the trailing \. Look over the rest of the information on the screen and make sure that you have answered based on your system. 7 - What FTSPRO Profile Area would you like to start with? DON'T MISS this one! Enter the PROFILE that you want FTS FileStats to use. In the example we have used a profile called OPEN which is a .DBF file in the \FTSPRO\CTL\PROFILES directory. This file must exist. You can use PROSETUP.EXE to find your current profiles. You will be shown a list of the .DBF files in your \FTSPRO\CTL\PROFILES directory that you can pick from. 8 - You will then see this screen so you can double check your answers: ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³FTS FileSearch (c) WCCS v1.50i ³ ³You must end all Paths with a Trailing \ i.e. D:\FTSPRO\ not C:\FTSPRO ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º ºPath to your FTSPRO Directory : I:\FTSPRO\ º ºPath to your FTS_STAT.TPG Files : D:\PRGS\NEWFILES\TEST\ º ºPrivilege level to Log : 0 Privilege level for Sysops : 254 º ºLog the Sysops (Greater then SysPriv)? (Y/N) : Y º ºPath to your TBBS Userlog.bbs file : C:\TBBS\ º ºFTS Profile to use (Must exist): OPEN º º You Can also edit this file from DOS, edit the CNFG.DBF file º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Run the program again and this time press M at the opening screen. This will display the master filelist for all fileareas in the PROFILE that you selected. Since no data will be found, it will ask you if it can run the stats for each filearea. You answer Y or just sit back, the default on this prompt is only 15 seconds and is Y. This will created the master file report and gather all the needed data for each area. You're finished! Run the program and see the results! If you have different profiles like we do and base them on different access levels, you can set up more than one copy of this program on your system. Ask us for more information if you are going to use it this way. If you have any corrupted FE*.DBF files, this program will result in an error message. Note the error and repair the damaged file. This is one way to make sure that all of your FE*.DBF files are ok and in good shape. When we run into a damaged .DBF file we use Norton's FileFix to repair it. Note: There is on-line help as you install this program. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Other Options on TPG ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To EDIT the configuration information use the following format: Entry: Priv=255 KEY=^@ TYPE=200 Opt Data=D:\FTS_STAT\FTS_STAT /q && SYSEDIT You may want to run this from SYSOM if you have it. If you do type the following: C:\> DOTBBS 200 D:\FTS_STAT\FTS_STAT /Q && SYSEDIT \----------\------> Path to your FTS_STAT directory To VIEW the data in the log file, use the following format: Entry: Priv=255 KEY=^@ TYPE=200 Opt Data=D:\FTS_STAT\FTS_STAT /q && VIEW SYSEDIT and VIEW Options are also available on the main screen for users defined as Sysops. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ DISCLAIMER ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ As author of this software, I take no responsibility for any damage incurred to your computer system from the use of this software. This software was beta tested and all known bugs were repaired. In no way can this program do any damage to your system or your files unless the program is changed other then by me. If any bugs are found please let me know asap thru Internet E-Mail at Dave.ward@tbb.com or Fidonet at Dave Ward 1:371/1 or 371/8. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Other ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Unconditionally, these files do not become your property. You are obligated to be responsible for your key file and TPG files and to ensure no one else can or does obtain a copy from you. It grants only you, the original purchaser, use of this software as outlined in the license section of this document. Key files and your license to use this software are not transferrable. If you fail in these obligations you will not be eligible for upgrades or technical support and, at our discretion, we may take legal action against you for any damages incurred by your actions or lack thereof in the case that you fail to protect your key file or TPG files from being copied by another person. We have tested this program with 47 areas in a Profile, 200,000+ files, and a filearea with over 800+ fileareas. If you find some combination that gives an error message, we would like to know asap so we can fix it. The beta test cycle for this program lasted over 4 weeks. If you experience an End of File error while making the master report the first time, run the program again and rerun the master report. If you get the error again, note the filearea and check the DBF file to make sure it is not corrupted. See the end of the installation notes for information on fixing bad .DBF files. If this file is posted on a communications service, please include the following as the description (It's is enclosed as FILE_ID.DIZ). ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ FTS FileStats v1.50i Dated: 07/04/95 ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; FTS FileStats is a on-line file Statistics program written for FTSPRO. It will work with all versions up to v2. FTS FileStats is only use full for systems running TBBS/ TDBS that are also running FTSPRO (File Transfer System Prof). FTSPRO is one of the best file systems we have seen to date. FTS FileStats will take a Profile that you have defined, and let you see just what is in each area. This is all processed on-line so it is up to date! Reports include each filearea, displays totals, file counts, download totals, and master totals for the entire Profile. Other fun stats as well are included. Can be used for more than one profile. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³This Product is ShareWare and is FULLY ³ ³functional but does expire on 07/29/95 ³ ³Written by: Dave.Ward@tbb.com ³ ³The Beach Board BBS (941) 337-4950 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Shareware ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ok, now you're thinking "What's the catch? What is the cost?" If you feel you could use this program, the cost of this version is $24.95. We will have quite a few updates to this program but cannot promise when they will be available. For the latest version, a registered copy, or a new demo call The Beach Board BBS at (941) 337-4950 (28.8k) or (941) 337-5480 (14.4k). We accept Visa/MasterCard Online. Logon Name : TBBS SYSOP Password : SUN Then just follow the prompts. This is a fully functional program that will expire on 07/29/1995. You can FTP a new demo by sending a message To: FTPMAILER@tbb.com Subject: Text: GET FTS_STAT.ZIP or FREQ thru Fidonet at 1:371/1 or 1:371/8 using the name of FTS_STAT.ZIP ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ LICENSE ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This software is protected by both United States copyright law and international copyright treaty provisions. Any disputes relating to this software will be governed by the laws of the state of Florida. The prevailing party in any action or proceeding brought in connection with this software shall be awarded reasonable attorney's fees to be paid by the other party. By using this software you agree to all terms and conditions of this license agreement. If you choose not to agree and abide by the terms of this agreement, you must remove this software from your computer system. UNREGISTERED copies of this software can be freely distributed providing that the original contents are not modified in any way. Disk duplicators, CD-ROM distributors, and Bulletin Board System operators are granted the option to charge a reasonable fee for providing a copy of this software if it is understood by the purchaser that the fee does not entitle them to a registered copy of this software. A REGISTERED copy of this software, however, can not be copied or used at more then one location HOWEVER you may run more then one copy of this software on the same BBS system to allowed the use of more than one profile. This duplication can not exceed four copies on a single system. You may backup the software to make archival copies for the safeguarding of your data. You may not give this software away to anyone. You can transfer the license of this software if sold, by paying a transfer fee to transfer the key file and/or .TPG files. You cannot send your key file and/or .TPG files to anyone. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ WARRANTY ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ward's Computer Consulting Service hereby disclaims all warranties relating to this software, whether express or implied, including without limitation any implied warranties of merchantability or fitness for a particular purpose. Information in this document is subject to change without notice and does not represent a commitment on the part of Ward's Computer Consulting Service. W.C.C.S. will not be liable for any special, incidental, consequential, indirect or similar damages due to loss of data or any other reason. In no event shall W.C.C.S. liability for any damages ever exceed the price paid for the license to use this software, regardless of the form of the claim. The person using this software bears all risk as to its quality and performance. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ SUPPORT ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you have problems installing or using this software we will attempt to help you as much as possible. Many problems can be resolved easily through a brief message or a fax message. You can contact us via e-mail by calling our BBS directly or sending a FidoNet or an InterNet message. The telephone number and e-mail addresses for our BBS are listed at the beginning of this document. If you would rather call us voice, please call our voice mail number of (941) 278-2893 and leave your name, number, serial #, nature of your problem, and be expected to receive a collect phone call within 1-24 hours. Most calls are returned within a few minutes to an hour. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ UPGRADES ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Once you register this program, you will receive a KeyFile. You will be entitled to FREE updates within the current version. When the program changes from v1 to v2 or v2 to v3 there may be a small upgrade fee. This is not a promise. It depends on what is added to this program. Maintenance Releases will ALWAYS be free! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ The Form ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Name: _______________________________________________ Date ____/_____/_____ BBS Name: ______________________________________ Voice Phone (____) ____-______ Mailing Address: _______________________________ Data Phone (____) ____-______ City: _________________________ State: _________ Zip :_____________--_________ Internet Address: _______________________________ FidoNet: ____________________ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Qty Item Cost Extended³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1 FTS FileStats v1.5 ............................ 24.95 24.95 ___ Download the file from The Beach Board BBS 0.00 0.00 (Also where updates will be made available) ___ Mail a Copy on a Diskette __ 3.5/1.44 or __ 1.2M 6.95 _______ ___ Shipping charge (Overnight $11.95, Two Day $6.95, Ground $2.00) _______ Tax 6.00% (Florida Residents ONLY) ÍÍÍÍÍÍÍÍ Total Enclosed $________ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Form of Payment[] Charged On-line ³*FAX or Mail this Form signed* ³ [] Charge information enclosed ³*FAX or Mail this Form signed* ³ [] Check or Money Order enclosed³*FAX or Mail this Form signed* ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Credit Card ( [Visa] / [Master Card] ) ________/__________/__________/________ _______/_______ ______/______/_1995 Expires Date: Date I Agree to pay the total listed under Amount Enclosed to W.C.C.S. in Full. ______________________________________ _______________________________________ Issued To: (Print Above) Issued To: (Signature ) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If Mailed, Mail to: W.C.C.S. ATTN: David Ward Box 181 Fort Myers, FL 33902-0181 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Update Notes ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ July 3, 1995 Cleaned up main screen and added a few more options to the v1.50i Report at the end. Added a Log Privilege level option, if this is set to "0" no one is logged. Works separate from the log sysop option. * First Official Release Version * ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ July 1, 1995 Added the ability to tally the download counts and display the v1.50h totals. If you were running a previous version you need to deleted the ALL_STAT.DBF file and do a [M]aster File report. This will recreate the file and redo the tallies. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ May 15, 1995 Program started all versions from 0.1 to 1.50g were in beta. v0.1 to 1.50g No release note on these updates. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍ ³As always, we welcome your suggestions and comments!³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Trademarks ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ *NORTON is a trademark of Symantec Corp. *TBBS, TDBS and SYSOM are trademarks of eSoft, Inc. *FTS and FTSPRO are trademark of Frontier Technology Systems Corp. [eof]