===============================================================================
Packet: GANG                                                   Number:103302
Date: 08-20-95                                                  Refer#: NONE
From: SysOp of The Gang BBS                                    Recvd: N/A
  To: ZOOM 14.4 v42/Fax Owners!                                Conf: SysOp's 
Subject: .MDM File For Wildcat 3.91 +?




 I thought I would make this file for the people who have bought the ZOOM
 14.4/fax and who would use this modem for the BBS with hope of using the
 FAX on the BBS also. It took some time to setup this one guys, I played with
 it for about a week to use the full benefits of this modem. I hope this will 
 clear up some problems you maybe having with this, After I found the .MDM
 file on the WILDCAT! BBS at Mustang HQRS I thought GOOD! I won't have to
 mess around and have my BBS up and running in no time WRONG! I hit my cat.bat
 and seen the BBS(mine) make 5 attempts to set the initialization string. So
 I thought lets take alook at it again and get the trusty Dvorak's guide out.
 I'm not going into detail here to explain the commands,(buy the book) but I
 will give my setup and I have all the info I think you will need for you 
 system. I run a single line system with a 24 hr. line just for the BBS.
 
 Below you can see how I set my BBS up in makewild Hope this answers your
 questions.


P.S. make sure your PORT ADDRESS IS SET RIGHT! .MDM FILES DO NOT SET IT RIGHT
     SOMETIMES!!!

                         The Gang BBS
                         Lovell, Wy 82431
                         (307) 548-7037 24 hrs.
                         Running WILDCAT! of course!






   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º  08-20-95              Modem Definition - Part 1             10:54:29   º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

          1. Communications port number.............03
          2. Communications port IRQ ...............04
          3. Communications port base address.......03E8
          4. Determine ringing using ...............Ring Detect
          5. Determine baud rate using .............Result code 1
          6. Initialize port at what baud rate .....57600
          7. Lock DTE at initialization baud rate...Y
          8. Use CTS/RTS flow control...............Y
          9. Number of seconds to wait for carrier..60
         10. Milliseconds before answering..........1000
         11. Milliseconds to lower DTR for hanguup..2000
         12. Milliseconds to delay before prelog....1000
         13. Milliseconds to wait for result code...3800
         14. Milliseconds between command strings...2000
         15. Trigger level for FIFO.................4

   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º  [F1] Help   [F3] Load .mdm File  [F5] Save .mdm file     [ESC] Exit    º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º 08-20-95            Modem Definition  -  Part 2              10:54:53   º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
         1. Verbal code for RING................RING
         2. Verbal code for 300.................CONNECT
         3. Verbal code for 1200................1200
         4. Verbal code for 2400................2400
         5. Verbal code for 4800................4800
         6. Verbal code for 9600................9600|7200
         7. Verbal code for 14400...............14400|12000
         8. Verbal code for 19200...............19200|16800
         9. Verbal code for 38400...............38400
        10. Verbal code for 57600...............57600
        11. Modem error correction codes........ARQ|MNP|V42|REL
        12. Modem on-hook string................ATH0
        13. Modem off-hook string...............ATH1
        14. Modem reset string..................AT&F1
        15. Modem initialization string.........ATE0V1&C1&D2&K3&Q5S0=0S7=60%E0W2
        16. Modem answer string.................ATA
   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
   º      [F1] Help   [F3] Load .MDM File  [F5] Save .MDM File  [ESC] Exit   º
   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ


        If you have any questions or want to find out more about the
        string I have made call my BBS and leave a comment to the SYSOP.

                      ----------------------> BILL