ÄÄÍÍ Galaxy 5 ÍÍÄÄ Copyright (C) 1996 Thomas J. Smith Installation instruction sheet ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you are having trouble installing Galaxy 5, and need to manually install the game, move on to the section, MANUAL INSTALLATION. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you are upgrading, simply run INSTALL.EXE, and type in (or press F2 to pick), the path to your Galaxy 5 directory (after pressing the letter of the drive Galaxy 5 is located on). INSTALL will find GALAXY5.EXE in that directory, and ask you if you wish to perform an upgrade. You should only choose yes if you have customized any of your display files, or any other info in the G5 Editor. An upgrade will only copy over the .EXE's and the .OVR file and any other files needed to upgrade if there are any. If for some reason the INSTALL program does not work for you, then you can manually upgrade by unzipping the G5.ZIP file located within the G5xxx.ZIP file, and copying GALAXY5.EXE, GALAXY5.OVR, G5EDITOR.EXE, & G5SETUP.EXE over to your Galaxy 5 directory overwriting the old files. ALWAYS look at the README.TXT file included with every upgrade package!! Very important info is contained in this file! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ FILES IN THIS ARCHIVE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Included with G5xxx.ZIP (where xxx is the version number, and may sometimes be more than 3 characters, like G5xxxx.ZIP), should have been the following files. INSTALL.EXE - Installation program. INSTALL.TXT - This installation instructions text file. GALAXY5.DOC - Documentation for the door game. G5.ZIP - Program files zipped (pathnames stored, subdirectories recursed). GALAXY5.ANS - ANSI screen for your BBS. WHATSNEW.TXT - Changes, additions, fixes, etc. in this version (as well as previous versions). FILE_ID.DIZ - Description text file. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ QUICK INSTALL ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1 þ Unzip G5xxx.ZIP to either a temporary directory, or the directory where you wish to install the game. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 2 þ Run INSTALL.EXE, choose the letter of the drive you want the game installed to, then enter the directory where you want the game installed to. If you choose a directory that does not exist, it will be created. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 3 þ After INSTALL loads G5SETUP.EXE, choose "Node Setup," and setup all of your BBS nodes, then choose "Setup Galaxy 5" to set the game to your system and your likings (if upgrading, INSTALL will not load G5 Setup). ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 4 þ Create your batch files for running the door. Your batch file(s) that you use to run the game MUST call the G5.BAT file with a node number as the first parameter. So in your batch file(s) you would use something like, CALL G5.BAT 1 where 1 is the node number being loaded. Wildcat! systems can take advantage of the wcnodeid variable by using, CALL G5.BAT %WCNODEID% Example, @ECHO OFF CD\DOORS\GALAXY5 CALL G5.BAT 1 CD\BACK\TO\BBS\OR\WHATEVER ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 5 þ To try the game locally, either run the LOCAL.BAT file, or type GALAXY5 /L on the command line. *NOTE* using the /L parameter instead of the LOCAL.BAT file will not allow you to use any Xports in the game. If you try to use an Xport and you used the /L parameter, then the game will exit to DOS. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DETAILED INSTALLATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1 þ You've probably already unzipped the G5xxx.ZIP file. Now just run the INSTALL.EXE program. INSTALL can be ran from a temporary directory and it will create its own directory of your choice and place the files in their proper places, or if you are running it from the directory you want it installed to, it will create the necessary directories, and place the files in their proper places. Either way, the installation program will install the game properly. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 2 þ In the INSTALL program, you will first be asked to key in the letter of the drive you want the game installed to. Then, if a valid directory is found on that drive where the game can be installed, then it will be shown, otherwise, the root directory of that drive will be shown. Type in the directory where you want the game installed to. If the directory already exists, you may press F2 to choose that directory from a pick list. Pressing F2 will only work for choosing a directory that already exists. -=ð=- If a GALAXY5.EXE file is found in the directory you chose to install to, then you will be asked if you wish to use the upgrade options. When you do, then only the files needed to upgrade will be copied to your G5 directory. If you have not customized anything about the game, then it would probably be best to choose NO when asked to use upgrade options. This is safe to do, and will keep all info pertaining to your players. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 3 þ INSTALL will automatically load the G5SETUP.EXE program (unless you are using the upgrade options). When you get to the G5 Setup program, the first thing you should do is choose "Node Setup," and configure all of the nodes that you have. G5 Setup contains online help throughout, just press F1 whenever you have a question to see if it helps! :) After configuring your nodes, choose "Setup Galaxy 5" to set up the game to your system and your likings. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 4 þ Create your batch files for running the door. Your batch file(s) that you use to run the game MUST call the G5.BAT file with a node number as the first parameter. So in your batch file(s) you would use something like, CALL G5.BAT 1 where 1 is the node number being loaded. Wildcat! systems can take advantage of the wcnodeid variable by using, CALL G5.BAT %WCNODEID% Here is an example for node 2's batch file, @ECHO OFF CD\DOORS\GALAXY5 CALL G5.BAT 2 CD\BACK\TO\BBS\OR\WHATEVER And here is an example using the Wildcat! %wcnodeid% variable, @ECHO OFF CD\DOORS\GALAXY5 CALL G5.BAT %WCNODEID% CD\WILDCAT\WCWORK\NODE%WCNODEID% I use the above example using the %wcnodeid%. In fact, it is exactly what my batch file looks like! Of course you must remember that you have to be using the wcnodeid variable in order for this to work. For a single line system, all you would have to do is put SET WCNODEID=1 either in your CAT.BAT or your AUTOEXEC.BAT. As for multi node Wildcat! systems, you would have to add SET WCNODEID=N (where N is the proper node number), in each of your CAT*.BAT files. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ It is extremely important that you CALL the G5.BAT file, and not GALAXY5.EXE in your BBS batch file(s)!! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ MANUAL INSTALLATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1 þ Unzip G5xxx.ZIP to the directory you wish to install the game to (xxx will be the version number). ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 2 þ Rename the G5.ZIP file (this is inside the G5xxx.ZIP file) to G5.EXE. G5.ZIP is actually a self extracting .ZIP archive renamed back to .ZIP from .EXE. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 3 þ Type "G5 -d" (without the quotations). This will create a few directories and place the proper files in the proper directories. After this is done, you may delete the G5.EXE archive, as it is no longer needed. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 4 þ Run G5SETUP.EXE and first choose "Setup Nodes" then choose "Setup Galaxy 5" to setup the game to your system and your likings. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 5 þ Follow the instructions above for making your batch file(s) for running the door from your BBS software. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 6 þ To try the game locally, type LOCAL and press enter, or type GALAXY5 /L on the command line. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ þ END OF FILE þ