DayWatch Installation notes:

DayWatch was written in Visual Basic 3.0 and requires the following files:

Filename:            Must be located in:  (after setup)
-------------|---------------------------------------------------------
DWxxx.EXE        User defined ( Default = C:\DAYWATCH )
                 (xxx is the version number ie. DW196.EXE etc.)
DW.HLP           Same directory as DWxxx.EXE
VBRUN300.DLL     Windows System Directory ( Usually C:\WINDOWS\SYSTEM )
THREED.VBX       Windows System Directory ( Must be dated 07/16/1993+ )
CMDIALOG.VBX     Windows System Directory
COMMDLG.DLL      Windows System Directory
MMSYSTEM.DLL     Windows System Directory

The setup files included with this shareware version are:
DWxxx.EXE, DW.HLP, CMDIALOG.VBX, FILE_ID.DIZ, ORDER.FRM, THREED.VBX 
SETUP.EXE and README.TXT. 
A file named ORDER.INF may or may not be included.

The file VBRUN300.DLL can be downloaded from most on-line services and local 
bulletin boards.
COMMDLG.DLL and MMSYSTEM.DLL are already in your Windows\System directory if
you're running Windows 3.1 or above.

 If you already have a visual basic 3.0 program on your system, chances are, 
you already have these files (except the .EXE and .HLP files) and don't need 
to download them.

You may find that you have an older version of THREED.VBX located in your 
C:\WINDOWS directory. This will cause buttons & controls in DayWatch to appear 
strange. If this is the case, you can copy over the older version with the 
newer version of THREED.VBX provided the old software already on your system 
will run correctly with the newer version. Most older software will run just 
fine with the updated version of THREED.VBX. Be sure to keep a backup copy of 
the older version just in case.

YOU MUST HAVE "VBRUN300.DLL" IN YOUR WINDOWS\SYSTEM DIRECTORY PRIOR TO RUNNING
SETUP.EXE.
To install:
1. Make note of what drive and directory these setup files are located in.
2. Run SETUP.EXE from Program Managers File/Run drop down menu.
3. Just follow instructions for directory location selections.

Note:
Under File/Properties in the Program Manager, be sure to set the WORKING 
DIRECTORY the same as the directory that DayWatch is run from. This is so 
DayWatch can find the help file DW.HLP. You can determine what directory 
DayWatch looks for the help file in by clicking on Help-Information in the
event list menu.The box labeled Working Directory is where the help file
"DW.HLP" should be.

-----------------------------------------------------------------------------

Contacting the author:

I can be reached by e-mail at:

           Compuserve address: 72064,1161
           Internet   address: 72064.1161@compuserve.com
Snail-mail:
           Dan Hounchell
           P.O. Box 627
           Foresthill, Ca. 95631

-----------------------------------------------------------------------------
Registration:
To register this program, print the file: ORDER.FRM, fill it out and send it
along with $27.50 (US) to the mailing address shown above.

I also plan on submitting this program to the WINSHARE forum on CompuServe.
If you have a CompuServe account, you can register this program by typing
GO SWREG and entering the registration number for this program. When I
receive this number, I will update this readme file with that information.


-----------------------------------------------------------------------------
Known Bugs:

When quickly swiching between event lists or scrolling through the quick list,
you may get a system error message that reads:

          "An error has occured in your application
  if you choose Ignore, you should save your work in a new file
       If you choose Close, your application will terminate"
                   
                   [Close]   [Ignore]

If you get this message, you can click on IGNORE and DayWatch will continue 
without problems. This error is due to a problem with Visual Basic itself
and, hopefully, I will have a workaround for this in the near future.

11-05-1995:
Addendum: Version 1.92 seems to have cleared this up. If this bug (or any 
          other for that matter) shows up, please let me know as I sincerely
          intend to support and continue to improve this program.


-----------------------------------------------------------------------------
Distribution Notice:
This software may be freely distributed as long as all associated files 
are included in the bundeled group of files and that there are no additions, 
deletions or modifications to any of the files contained in this package.
This software may not be included with any other product except as a 
packaged group of SHAREWARE programs distributed on a CD ROM. No profit may
be gained through the distribution of this product. No amount may be charged
for this product except a distribution fee not to exceed $10.00 US.
Distributers must notify their customers that this is a shareware product
and requires a seperate registration fee to the author for continued use.
Distributers must notify their customers that this product requires the file
VBRUN300.DLL and that it must be obtained seperately.

This README.TXT file and the files: DW196.EXE, FILE_ID.DIZ, ORDER.FRM,
ORDER.INF and DW.HLP Copyright 1995 - Dan Hounchell.