3.5 Disk Labeler, Version 2 (c) 1995 Gerald D. Schleicher

This program is distributed as shareware. A registered version on 
 a 3.5 inch diskette may be ordered for a fee of $20. It will be 
sent via U.S mail. This program will function fully for a 
trial period of 2 months or 200 uses, whichever comes last. 

REQUIREMENTS: Windows 3.1, and a printer with a manual feed
which allows the sheet to be centered lengthwise. 		

INSTALLATION: Place "disklb2s.exe in the desired directory. The  
program can now be run from the Program Manager (select 
FILE, then RUN. Use Browse to find "disklb2s.exe"), or the   
File Manager (highlight "disklb2s.exe", and click it twice, 
or select FILE, then RUN.)

To add this program to your "APPLICATION" or other window so it 
can be run by simply clicking its ICON, do the following:
1) Open the APPLICATION or other desired window by clicking 
   on it twice. 
2) From the Program Manager select FILE, NEW, PROGRAM ITEM, 
   then click the OKAY button.
3) Fill in the boxes shown. "Description" -- Make up any name. 
   This will appear under the ICON representing the program.
   "COMMAND LINE" -- Type in the full path and file name. For 
   example, this would be "c:\windows\disklb2s.exe" if your hard 
   drive was letter "c", and the program was in the "windows" 
   directory. 
   "WORKING DIRECTORY": Fill in the path name withput the file 
   (same as COMMAND LINE, but leave of "disklb2s.exe".

PROGRAM PURPOSE: Allows printing on those folded-up packets of
   labels included in many 3.5 inch disk boxes. 16 brands are  
   supported. Label sets filled in for printing can be saved 
   under a file name chosen by the user for later reprinting. 
   All fonts available on your printer are supported. 

PROGRAM OVERVIEW: The program consists of a main window for 
   selecting a label brand, and a secondary window for 
   setting up label text, and printing.

PROGRAM DETAILS:
   Main Window: The lefthand column has a list of the brands 
     supported.As you scroll through this, the displays in 
     the center and right columns will reflect the current
     selection. The middle display shows the number of label 
     lines, and the approximate proportions. The right column 
     shows the number and layout of labels on a full sheet. 

     After highlighting the desired label choice, choose the 
     "LABEL CHOICE MADE" button to proceed to the next screen.   
     Choose "EXIT" to quit the program. The "ORDER FORM" button    
     allows you to fill in and print off an order form.

  Secondary Window -- (fill in labels, print labels)
    MAIN CHOICES"
    "1. Select Label to work on": Below this text is a box with 
    numbering. Use the arrow keys (or mouse) to highlight the number
    (by sheet position) of the label ypu wish to view or fill in.  
    A diagram below this box indicates the label sheet numbering. 
    As you scroll through this box, the highlighted label will 
    be displayed in the center of the screen. If the label is  
    blank, the center display will be blank.

    "2. Fill in or modify a label": Type the desired text into 
    the label pictured below this heading. You MUST select the 
    "SAVE THIS LABEL" button to preserve this label.

    "3. List of Saved Label Sets: Below this heading is a list of 
    labels sets, if any, previously saved by the user. To make 
    any of these sets the current labels, highlight the desired set 
    then select the "Okay, Use Labels selected Below" button.

    "4. Click here for current disk info": Select this button to get
        file information on any diskette currently in your first 
        diskette drive (usually letter drive "A"). 

    "5. Add Disk Info to Label": Use a "copy and "paste" method to add
        displayed disketted info to the current label.

    "6. Copy a Label": Any label created and saved can be copied
        to other labels. Highlight the desired numbers in the "FROM"
        and "TO" boxes, the select the "OKAY< COPY LABELS" button. 
     
    Other Buttons:
    "Save This Label" -- preserves the contents of the current label 
      until you go back to the main window. Good enough for a one-time
      print job. (See "Save label set" for a permanent solution)

    "Erase this Label" -- blank out the currently displayed label.
      If label is a part of a label set, the set won't be changed
      unless you now save it again under the same file name.

    "Save Label Set" -- save all the labels under a name chosen by
      the user. This set will be available at any time in the future.

    "Print Fonts" -- Gives a list of all available printer fonts. 
       Highlight the desired font. The displayed label text 
       will change to reflect the current font.
 
    "Print Labels" -- Choose to start the print job. 

    "Quit" -- leave the secondary window. Return to the main window.

    Printing Notes: The label sheet must be fed manually into your 
     printer. Place the label sheet into the manual feed in the 
     orientation shown in the secondary window, lefthand column, with
     the top of the picture representing the top (front) of the label
     sheet.The sheet must be centered exactly lenghtwise. Close the
     guides, if any, firmly around the sheet. Practic with a piece of
     scrap paper cut to size before risking your label.
     For some brands the entire sheet is too long to print at once. 
     In these cases, split the sheet into maximum and minimum sizes,
     as indicated.

     FILES: disklb2s.exe, dskmaste.txt, dsklqchk.txt, dsklbasf.txt,
            dsklhlnd.txt, dsklmemx.txt, dskl3m.txt, dsklsony.txt, 
            dsklmaxl.txt, dsklmgm.txt, dsklhden.txt, dskltdk.txt,
            dsklibm.txt, dskldys.txt, dsklkod.txt, dsklverb.txt,
            dsklbon.txt, and "others" (user-defined labe sets).
            Delete all of these files if you decide to scrap this 
            program. They will exist on whatever directory you place
            the program in. 

    QUESTIONS, COMMENTS, HELP:
     Contant me, Gerald Schleicher via COMPUSERV (ID = 76143,671), 
     America Online (ID = GeraldSchl), 
     or US mail (address on order form).