ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Page 1 FileVision 0.11Beta 24 March 1996³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ README information for FileVision v0.11Beta Copyright (C) 1996 Claus Dreyer FileVision is a full featured file management program. It is designed to have a user friendly interface and at the same time be very flexible and highly configurable. It uses a Graphical User Interface (GUI) to get beyond the limited textmode of DOS. FileVision is shareware, but since this is the first release and since the program is still in the early stages of beta testning, this version v0.11Beta can be used for free. Now, please read the following section. ÚÄÄÄ READ THIS BEFORE USING FILEVISION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ The FileVision software and documentation is not freeware and may not ³ ³ be changed or altered in any way. You are free to distribute the ³ ³ original archive unmodified. ³ ³ ³ ³ Disclaimer. ³ ³ The entire risk arising out of the use of FileVision and its ³ ³ documentation remains with you. If you feel insecure using FileVision ³ ³ then remove it from you computer. ³ ³ ³ ³ In no event shall Claus Dreyer or any member of the FileVision team ³ ³ or its suppliers be liable for damages whatsoever including, but not ³ ³ limited to, direct, indirect, special, incidental or consequential ³ ³ damages or other pecuniary loss arising out of the use of or inability ³ ³ to use the software, even if Claus Dreyer has been advised of the ³ ³ possibility of such damages. In particular Claus Dreyer and any ³ ³ suppliers are not responsible for any costs including, without ³ ³ limitation, loss of business profit, business interruption, loss of ³ ³ business information, the cost of recovering such information, the ³ ³ cost of substitute software, or claims by third parties. ³ ³ ³ ³ All names and trademarks are the properties of their respective ³ ³ owners. ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Page 2 FileVision 0.11Beta 24 March 1996³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Overview of this document ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Preface..............................Page 1 Disclaimer...........................Page 1 Overview.............................Page 2 The FileVision Team..................Page 2 Introduction.........................Page 2 Using FileVision.....................Page 3 Getting help.........................Page 4 Reporting bugs.......................Page 4 Known bugs...........................Page 5 Contacting information...............Page 5 The FileVision Team ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Credits ÄÄÄÄÄÄÄ Programming Claus Dreyer SirFace GUI System Jens-Christian Huus Font Niels Krog Mortensen Betatesting Tobias Nielsen Peter Jepsen Morten Sigaard Kristensen README information Claus Dreyer Compiler Watcom C/C++ 10.5A Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ FileVision is file management program for DOS. Unlike most other similar programs, FileVision has a graphical user interface and the obvious straightforward way of operating the program is by a mouse. There is however full keyboard support and the behaviour of the keys can easely be customized. The program is based around two file windows and 37 user defined buttons. Each button can have a "backside" which gives 74 possible different functions. These functions can be selected from a list ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Page 3 FileVision 0.11Beta 24 March 1996³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ of internal commands or be external programs called from within FileVision. The way the source and destination directory is displayed in the file windows can also be customized. FileVision is all in all designed to be open for the user to configure to his/her special needs. The requirements to run FileVision is: - IBM PC or compatible with 386DX processor or better - DOS 5.0 or better - Mouse with a Microsoft Mouse Driver or compatible installed - VGA graphics card The following files are contained in the original archive. If they are not, or the sizes differ then the files have been tampered with and must be replaced with a new copy. FV.EXE 258.326 The FileVision program file. README.TXT 12.839 This text file. FILE_ID.DIZ 663 File ID for BBS use. If you encounter any bug related problems while using FileVision then please read the 'Reporting bugs' section and the 'Known bugs' section. Using FileVision ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This section is not intended as a manual for FileVision, but as an introduction or a 'getting started' section. A complete manual for FileVision has not been written yet and it will only be available to registered users when ready. In the following text a number elements in FileVision will be introduced. Throughout this text an abbreviation like 'Config/Drives' will be used. It meens, press the Config button in the lower right corner of the screen, and then press the Drives button in Configuration Menu. - At the top of the screen, just above the two file windows, are two fields with different colors. These colors indicate which window is the source window and which is the destination window. In the standard configuration, the source color is light red and the destination color is light green. The colors can be changed in the Config/General menu. The fields also show the source and destination directory. Between the fields are two buttons with an 'L' and 'R' on them. Pressing one of them will give access to options about sorting and excluding files from the directory shown in that window. - There is a row of buttons under each file window showing the available driveletters. Pressing one of these buttons will read the last current directory of that drive. The buttons can be changed to read the root directory in the Config/Drives menu. The leftmost button under the left window, and the rightmost button under the right window, shows '..'. This button will read and show the parent directory. Two buttons with arrows in the middle, can be used to shift in a new row of driveletters, if there are more drives than can be shown. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Page 4 FileVision 0.11Beta 24 March 1996³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ - Pressing the left mousebutton at the edge of the screen within the the file windows, will give the same effect as pressing the '..' button. Pressing the right mousebutton instead, reads the root directory of the active drive. - At the bottom of the screen is a large button, which at startup shows the free memory. Pressing this button will change it to show the free space on the source and destination drive. Other status information may be shown here as well. Pressing this button again will return it to the previous state showing free memory. - Above the bottom button and below the file windows is 4 rows of buttons each having 10 buttons. 37 of these buttons can be user defined. The last 3 is Config, Help and About. The Help button has no function yet. These 37 user definable buttons can be customized in the Config/Buttons menu. Three types of buttons exists: Undefined, Internal and External. At the top of the Config/Buttons menu is a button with a circular arrow, which shows what type of button the active one is. Since this is not a manual, a complete description of the Config/Buttons will not be made here, but you are encouraged to experiment with this menu as it holds a lot of opportunities. - You are in general encouraged to explore the configuration menu because it will give you the possibility to exploit FileVision to its full potential. Getting help ÄÄÄÄÄÄÄÄÄÄÄÄ There is no official "helpline" of any kind. You could try to use one of the contact adresses, but there is no guarantee for a reply. Instead it is suggested that you try to use the Internet, FidoNet or any other mailnet where computer users gather. Reporting bugs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you encounter any bug related problems while using FileVision, then please report them using as many relevant information as possible. The following text gives you an idea of want should be included when a bug report is send. Please note that anything send with the bugreport will be kept confident. - System information: - Processor type (eg. Intel 486DX). - Operating system and version (eg. MS-DOS 6.0). - Type of graphics card. - Size of memory (eg. 8MB). - Mouse driver name and version. - Memory manager and version (eg. QEMM 7.0). ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Page 5 FileVision 0.11Beta 24 March 1996³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ - FileVision information: - Version and build nr. Can be found pressing the About button. - The configuration file FV.CFG. This is very important. If it contains confidential information then please strip it from the file. - Other files: - If the bug occurs with a specific file, then please send the file with the bug report. If you for some reason can't send it, then describe the nature of the file. - Description: - Describe in details what you do to provoke the bug and what you think the problem is. If the bug doesn't show the same way or at the same place every time, then describt what it looks like and what happens. Known bugs ÄÄÄÄÄÄÄÄÄÄ This section contains bugs already known. It is useful to read this before you send in a bug report or if want to know what kind of bugs FileVision is released with. - ASCII viewer. It might show you text a bit strange sometimes, but it is harmless apart from the appearence. - The Config/Extension menu. It is not made yet. Only the ZIP arhcive function works. Contacting information ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you decide to use the following contact adresses then don't expect an immidiate answer. If you use e-mail you will (hopefully) receive a confirmation when your mail has been read. - Mail: Claus Dreyer Ewaldsbakken 2A 2900 Hellerup Denmark - E-mail: cd@it.dtu.dk There is currently no official WEB page on the Internet. Hopefully there will be soon. There is also no official distribution sites of any kind.