Path: asustek.asus.com.tw!usenet From: alexccn Newsgroups: alt.comp.periphs.mainboard.asus Subject: AMD 5K86 Date: Mon, 08 Jul 1996 00:57:00 +0800 Organization: ASUSTeK Computer Inc. Lines: 11 Message-ID: <31DFEC5C.3822@hk.super.net> NNTP-Posting-Host: annex5-39.hk.super.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.0b4Gold (Win95; I) Hi, I can't find the jumper setting in the manual about using the AMD 5K86. Can you supply this jumper setting to me ? I'm using the P/I-P55T2P4, please help me...... Regards, Alex Cheng (Come from Hong Kong.) Newsgroups: alt.comp.periphs.mainboard.asus Path: asustek.asus.com.tw!voyager.iii.org.tw!spring.edu.tw!nctuccca.edu.tw!news.edu.tw!newsserver.jvnc.net!newsserver2.jvnc.net!netnews.upenn.edu!msunews!harbinger.cc.monash.edu.au!news.mira.net.au!news.mel.connect.com.au!news.syd.connect.com.au!news.bri.connect.com.au!news.gil.com.au!news From: jasonc@gil.com.au (Jason Cross) Subject: Re: ASUS w/ 430HX B0 Stepping available? Sender: news@gil.com.au Message-ID: <31de130c.634471@news.gil.com.au> Date: Sat, 6 Jul 1996 07:20:54 GMT X-Nntp-Posting-Host: cs11p6.ipswich.gil.com.au References: <01bb6956.634830c0$e4c05281@tige.colostate.edu> Organization: Global Infolinks Internet Server, Ipswich Qld Australia X-Newsreader: Forte Agent .99e/32.227 Lines: 25 On Wed, 3 Jul 1996 21:10:43 -0600, "J. Tige Richardson" wrote: >Does Asus have a motherboard that is upgradeable to 200MHz Pentium, has >the 430HX (Triton II) Chipset and has the B0 stepping revision? > >Thanks for any help. Even though most of the Asus specs only seem to go as far as 166mhz, they all seem to have 3.0x core with 66mhz external, so they *should* support the P5-180 and P5-200, only time will answer this one. Here is a paste from an earlier posting in this newsgroup that may help you with the 2nd part of your question..... >I recommend the ASUS P/I-P55T2P4. If you buy it you should get Rev 2.1 >of the board and check out whether it's SB82371SB chip is marked with >SU93, that is the B-0 stepping of the PIIX3 controller supporting USB. Hope it helps. Jason Newsgroups: comp.sys.ibm.pc.hardware.chips,alt.comp.periphs.mainboard.asus Path: asustek.asus.com.tw!voyager.iii.org.tw!nctuccca.edu.tw!howland.reston.ans.net!newsfeed.internetmci.com!in2.uu.net!iglou!venkat From: VCCS Subject: Re: VCCS Good References In-Reply-To: <4rgh84$415@madeline.INS.CWRU.Edu> X-Sender: venkat@iglou X-Nntp-Posting-Host: iglou Content-Type: TEXT/PLAIN; charset=US-ASCII Message-ID: To: "Jose A. Cid" Sender: news@iglou.com (News Administrator) Organization: VCC Systems References: <4r17n4$si3@chaos.kulnet.kuleuven.ac.be> <8C3C016.0B0F005249.uuout@onwe.co.za> <4rgh84$415@madeline.INS.CWRU.Edu> Mime-Version: 1.0 Date: Sun, 7 Jul 1996 16:57:06 GMT Lines: 46 Xref: asustek.asus.com.tw comp.sys.ibm.pc.hardware.chips:52800 alt.comp.periphs.mainboard.asus:13418 On 4 Jul 1996, Jose A. Cid wrote: > > > >Kicking off competitors again? > > > >I am not your competitor. I am not an anonymous. I have paid more that > >$1000 for goodies one year ago I never received. You sent me copy of > >certificate of mailing #0064942-03 on the PS form 3817, which doesn't > >contain parcel weight and clearly indicates you paid for this shipment > >$0.55 (like for ordinary letter). Address on the form is incomplete, > >no wonder I never received that 'parcel'. Also it contains the note > >"Does not provide for insurance", while I have paid for fully insured > >parcel. I never received your promised insurance receipt number either. > >You also told me you will to trace the parcel and put my address on the > >trace, but I never received any tracing information in my postal box. Do NOT make these Absolutely *FLASE* posts. Verifying our shipping records, shows above induvidual's package more than *one* year ago was shipped out USPS # 298640 (dt 6/10/*95*) (Athens P.O) and was received at Johannesburg , South Africa (Package # II 015 378 624 ZA). Jose CID , these *false* posts of yours are so misleading and utterly baseless that we maybe forced to take up your repeated slander about us in forums other than these. If you know the facts, post it , if not please SHUT up. > >> All we really know is the facts noted above. And they're pretty damning. > >V> ^^^^^^^^^^^^^^^^^^^^ > > > >V> As pointed out above, the annonymous posts by others have changed the facts. > > > >Take my facts then. > > > >Mirek Komon > -- > _/ _/ ______/ Jose Cid - jac14@po.cwru.edu > _/ _/ _/ _/ Fe' verdadeira e' aquela que pode enfrentar > _/ _______/ _/ a razao face a face em qualquer epoca! A.K. > ______/ _/ _/ ______/ Just my hard earned $0.02, not my employer's! Newsgroups: comp.sys.ibm.pc.hardware.chips,alt.comp.periphs.mainboard.asus Path: asustek.asus.com.tw!voyager.iii.org.tw!nctuccca.edu.tw!howland.reston.ans.net!newsfeed.internetmci.com!in2.uu.net!iglou!venkat From: VCCS Subject: Re: VCCS Good References In-Reply-To: <4rggd0$33p@madeline.INS.CWRU.Edu> X-Sender: venkat@iglou X-Nntp-Posting-Host: iglou Content-Type: TEXT/PLAIN; charset=US-ASCII Message-ID: To: "Jose A. Cid" Sender: news@iglou.com (News Administrator) Organization: VCC Systems References: <4r17n4$si3@chaos.kulnet.kuleuven.ac.be> <8C3C007.0B0F00524B.uuout@onwe.co.za> <4rggd0$33p@madeline.INS.CWRU.Edu> Mime-Version: 1.0 Date: Sun, 7 Jul 1996 17:05:51 GMT Lines: 49 Xref: asustek.asus.com.tw comp.sys.ibm.pc.hardware.chips:52801 alt.comp.periphs.mainboard.asus:13419 On 4 Jul 1996, Jose A. Cid wrote: > > In a previous article, komon@onwe.co.za (MIREK KOMON) says: > > > > >Not only from Mr. Fortuna. Looks like it belongs to his usual business > >practice. Just look below how he has tried to solve my matter (important > >things arrowed). Note, that I paid for three Matrox Millenium WRAM cards > >totaling US$1087 As stated below. Above is totally false. South African Postal receipt # II 015 378 624 ZA for above package. > >Mirek Komon > >komon@onwe.co.za > > > >PS. Any replies please CC by EMail. > > >V> However we do not want the matter to by unresolved or you to be > >V> dis-satisfied. Nor will we take the Loss caused by your postal Services > >V> Negligence.(We have stopped using AIR-Mail, since then. To ALL places except > >V> Europe) > > > >V> So out of My own poacket, Will have two 2meg VRAM cards shipped out to you. > > > >V> But Before I can do so, Would Need a Fax from you, Clearly Sating that > >V> the original Package was Shipped Out by us , as per emails. > >V> That Receipt for same , was Received by you. And that you *CLEARLY* > >V> Understand that it was your Postal Service, which Has Bungled Up. Utterly *FALSE*. The above original package USPS # 298640 (dt. 6/10/*95*) was received in Johannesburg, South Africa ( Receipt # II 015 378 624 ZA) To claim South African Postal Service bungled it is a *false* statement. Jose CID , do not make these *FALSE* posts. > -- > _/ _/ ______/ Jose Cid - jac14@po.cwru.edu > _/ _/ _/ _/ Fe' verdadeira e' aquela que pode enfrentar > _/ _______/ _/ a razao face a face em qualquer epoca! A.K. > ______/ _/ _/ ______/ Just my hard earned $0.02, not my employer's! Path: asustek.asus.com.tw!voyager.iii.org.tw!spring.edu.tw!nctuccca.edu.tw!news.edu.tw!newsserver.jvnc.net!news.join.ad.jp!newsxfer.itd.umich.edu!news2.acs.oakland.edu!condor.ic.net!branch.com!usc!math.ohio-state.edu!cs.utexas.edu!howland.reston.ans.net!surfnet.nl!swsbe6.switch.ch!swidir.switch.ch!serra.unipi.it!news.caspur.it!news1.mclink.it!usenet From: fabio sibillano Newsgroups: alt.comp.periphs.mainboard.asus Subject: fireball and mode4 Date: Sun, 30 Jun 1996 23:14:17 +0200 Organization: MC-link The World On Line Lines: 11 Message-ID: <31D6EE29.4078@mclink.it> NNTP-Posting-Host: ppp-171.mclink.it Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.02 (Win95; I) asking again... i have a p55tp4xe and wi hd (quantum fireball) can't boot in mode 4. The bios recognize this hd with a mode 4 type but there is NO WAY to use it if i select this mode. Why ? is a problem of the onboard controller ? tnx in advande. Fabio Sibillano Newsgroups: alt.comp.periphs.mainboard.asus,alt.sys.pc-clone.dell,alt.sys.pc-clone.micron,comp.sys.ibm.pc.hardware.systems,comp.sys.ibm.pc.hardware.chips Path: asustek.asus.com.tw!voyager.iii.org.tw!spring.edu.tw!serv.hinet.net!news.uoregon.edu!hunter.premier.net!news.mathworks.com!newsfeed.internetmci.com!iglou!venkat From: VCCS Subject: Re: Jose CID / *FALSE* post In-Reply-To: <4rh7it$27l@madeline.INS.CWRU.Edu> X-Sender: venkat@iglou X-Nntp-Posting-Host: iglou Content-Type: TEXT/PLAIN; charset=US-ASCII Message-ID: Sender: news@iglou.com (News Administrator) Organization: VCC Systems References: <31d0d338.12016497@news.tiac.net> <4rb6j3$dkk@madeline.INS.CWRU.Edu> <4rdrru$n2n@madeline.INS.CWRU.Edu> <4rh7it$27l@madeline.INS.CWRU.Edu> Mime-Version: 1.0 Date: Sun, 7 Jul 1996 18:22:42 GMT Lines: 84 Xref: asustek.asus.com.tw alt.comp.periphs.mainboard.asus:13421 alt.sys.pc-clone.dell:4518 alt.sys.pc-clone.micron:6175 comp.sys.ibm.pc.hardware.systems:21554 comp.sys.ibm.pc.hardware.chips:52815 On 4 Jul 1996, Jose A. Cid wrote: > > Jeff, I am not sure if the matter should be dropped. Have you seen the posts > from Mirek Komon (comp.sys.ibm.pc.hardware.chips)? Often when Mr. Fortuna > posts apear on Usenet some one else .... Yep. Never our customers though! The above induvidual has not posted for over 6 months now. Wonder why?? :-) Do NOT make false allegations about us. Saying we did not ship etc. We have replied publicly to your *false* posts in this and another group. The above package USPS #298640 (dt 6/10/*95* ) over a year ago was received in Johannesburg,South Africa (Receipt # II 015 378 624 ZA) So do not persist in your LIES. As seen below there are several hundred International Customers who have dealt with us. > Now, general, nonspecific coments. > > In USA people is used to argue about his rights, but this is not so common > in other countries. Since prices here are lower than overseas, it is easy > to convince someone to buy goods in USA and have them shipped. When people > get screwed, most do not complain. This is very unfortunate because more and ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ On the other hand, our INternational Customers, not only Vouch for our good deals, they also list their email *and* phone numbers for reference. (as seen below) In over 30 Countries, references are available. VISA/MC is accepted. So do not try cheap tricks as above on us. > Jose Cid. > -- > _/ _/ ______/ Jose Cid - jac14@po.cwru.edu Many more references are listed on our Web Site VCCS www.vccs.com VISA/MC INTERNATIONAL NET REFERENCES ----- ------------------------ Name email PHone# ---------------------------------------------------------------------------- * indicates PREPAYMENT! OVERSEAS -------- Bruno Dias* dias@uminho.pt Joao Rochate* jrochate@ualg.pt (+351).89.817095 Jan Trzcinski* trzc@iol.ie Stefan Szabo* Stefan.Szabo@scinfo.u-nancy.fr (+33).83 24 48 31 Philippe Steindl* Philippe.Steindl@public.imp.ch Eric Komen* komen@cs.utwente.nl (+31).53.351903 Naoki Moriya* nmoriya@IBM.net (Japan) (+81)045.7832220 Christian Vilhelm* 73544.3412@compuserve.com(France) Martin Kunz* mkunz@stud.phys.ethz.ch (+41)56.41.8041 Steve Erzberger* serzberger@di.epfl.ch (+41).21.624.0991 Hiroshi Harada* h-harada@trc.rwcp.or.jp (+81).298.53.1641 Kai Leibrandt* kai.leibrandt@brunel.ac.uk (+44).784.431.341 Shigeji Ishikawa* shigeji@mt.NEC.co.jp (+81).3.3456.7563 Manu Kumar* kumarm1@vax.lse.ac.uk Thomas Deiler* deiler@informatik.tu-muenchen.de Above is but a small sample. References for over $100K+ are available if needed. -- Venkat Thirumalai http://www.vccs.com VISA / MC venkat@vccs.com Fax # 888.VCC.SYSTEMS or (+)614.592.6299 Path: asustek.asus.com.tw!voyager.iii.org.tw!nctuccca.edu.tw!howland.reston.ans.net!vixen.cso.uiuc.edu!newsfeed.internetmci.com!hookup!news.nstn.ca!news From: Carlos Fernandez Newsgroups: alt.comp.periphs.mainboard.asus Subject: ASUS or Intel Triton? Date: Sun, 07 Jul 1996 14:14:25 -0700 Organization: Nova Scotia Technology Network Lines: 3 Message-ID: <31E028B1.7D95@fox.nstn.ca> NNTP-Posting-Host: ts23-11.tor.istar.ca Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.0 (Win16; I) I'm looking to buy either an ASUS or Intel Triton Pentium motherboard. Can anyone comment on the pros and cons of both? - Thank you Path: asustek.asus.com.tw!voyager.iii.org.tw!spring.edu.tw!nctuccca.edu.tw!howland.reston.ans.net!newsfeed.internetmci.com!in2.uu.net!EU.net!Norway.EU.net!nntp.uio.no!nntp-oslo.UNINETT.no!nntp-trd.UNINETT.no!not-for-mail From: sthaug@nethelp.no (Steinar Haug) Newsgroups: alt.comp.periphs.mainboard.asus,comp.sys.ibm.pc.hardware.misc,comp.unix.bsd.freebsd.misc,comp.os.linux.hardware Subject: Re: Which SCSI Controller Card better buy? Date: 07 Jul 1996 19:46:36 GMT Organization: Nethelp Consulting, Trondheim, Norway Lines: 22 Message-ID: <4rp46s$54o@verdi.nethelp.no> References: <4qljmq$c8m@ctylnk.cityu.edu.hk> <01bb660b.b4c98640$69fae59b@gary.netsystems.com> <4redg3$f1t@doc.zippo.com> <4rhs4k$6ko@news.interlog.com> NNTP-Posting-Host: trane.uninett.no In-reply-to: Paul Robert Nash's message of Sun, 7 Jul 1996 12:40:48 -0500 Xref: asustek.asus.com.tw alt.comp.periphs.mainboard.asus:13423 comp.sys.ibm.pc.hardware.misc:35545 comp.unix.bsd.freebsd.misc:14454 comp.os.linux.hardware:21270 [Paul Robert Nash] | If we could compile a list of other motherboards known to have this BIOS, | that'd be cool, because I've never seen any besides ASUS. I have a noname Pentium motherboard, made in China, which has the NCR BIOS. No word about this in the manual. The board is supposedly made by QDI, but it's completely anonymous, so it's hard to tell. I'd be happy to assist in maintaining a list of motherboards known to have this BIOS. As a start, I've set up a Web page for this at: http://www.nethelp.no/scsi/ncrbios.html | BTW, it probably actually matches the 2940 (no w) since 'w' means wide, | and the SC200 isn't wide... Unless you have several disks on your SCSI chain, it doesn't matter. With one 4 GByte Seagate Barracuda, I get *no* measurable difference between a 2940UW and an SC200. Steinar Haug, Nethelp consulting, sthaug@nethelp.no Path: asustek.asus.com.tw!voyager.iii.org.tw!nctuccca.edu.tw!news.edu.tw!news.sprintlink.net!news-stk-3.sprintlink.net!news-res.gsl.net!news.gsl.net!nntp.coast.net!howland.reston.ans.net!newsfeed.internetmci.com!newsxfer2.itd.umich.edu!netnews.worldnet.att.net!newsadm From: JE Warren Newsgroups: alt.comp.periphs.mainboard.asus Subject: TP4N and 512k cache Date: Sun, 07 Jul 1996 16:16:49 -0700 Organization: AT&T WorldNet Services Lines: 10 Message-ID: <31E04561.1391@worldnet.att.net> NNTP-Posting-Host: 15.atlanta-3.ga.dial-access.att.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.02 (Win16; I) I have a P55TP4N rev 1.01 4.51 bios and bought a 256k module to upgrade to 512 L2..installed the module and set the jumper to 512 but system did not recognize it and would hang after the bios screen. Reseated the module several times no help. Module says Elpina and the letters HT-VX with ver 3.0 written in one corner..dont know if it is Coast or not but came from an Asus dealer and supposed to be for this Mboard..possile I have a bad module I suppose and will send it back if I cant get it working..does anyone know any thricks I missed? This is a p133/32Mb EDO. TIA, Jim Path: asustek.asus.com.tw!voyager.iii.org.tw!spring.edu.tw!nctuccca.edu.tw!howland.reston.ans.net!newsfeed.internetmci.com!hunter.premier.net!news.uoregon.edu!arclight.uoregon.edu!news.bc.net!loki.express.ca!news From: krennie@express.ca (Kevin B. Rennie) Newsgroups: alt.comp.periphs.mainboard.asus Subject: Fix Needed: P55T2P4 Warmboot hangs system Date: Sun, 07 Jul 1996 20:46:00 GMT Organization: Internet Express Lines: 43 Message-ID: <4rp7o4$9ei@loki.express.ca> NNTP-Posting-Host: ppp94.express.ca X-Newsreader: Forte Free Agent 1.0.82 I have a problem with a new ASUS motherboard. I just replaced my 386 Motherboard with a T2P4 and I can't initiate a Ctrl-Alt-Del, Reset button, or software warmboot. System: CPU 133, 256k PBC, 16mb Maxtor 71260AP 1,260Mb (which was initially setup using MAX*Blast/Disk Manager 7.02 to compensate for the 386's Bios 528Mb Hard Drive limit. Disk manager loads Dynamic Driveoverlay v7.12 at startup.) Hitachi 4x CD-ROM using hit-ide.sys v1.06d Soundblaster (OEM) 16bit sound card using CTCM ICU and Vibra16 software U.S. Robotics 14,000 Sportster 14,400 data/fax (Internal) CL 5446 PCI Video Card with 2mb I get an error message on bootup as follows; Update DMI Information ERROR -- Can't Write ESCD The T25I0105.awd Flash Bios is set-up on the board already and I have Pflash v1.4 on diskette. Any ideas what may be causing the problem? Before I start screwing around with flashing the Bios (Does this ROM chip allow this?) I would like to get some ideas? Could the Legacy cards be causing the problem??? (as I saw mentioned in this newsgroup?) As much help as you give is appreciated, Sincerely, Kevin Rennie krennie@express.ca Path: asustek.asus.com.tw!usenet From: Enno Gruenefeld Newsgroups: alt.comp.periphs.mainboard.asus Subject: How to update an ASUS PVI-486SP3 with Plug & Play BIOS Date: Sun, 07 Jul 1996 23:06:21 -0700 Organization: ASUSTeK Computer Inc. Lines: 51 Message-ID: <31E0A55D.6BA8@t-online.de> NNTP-Posting-Host: funnel05.btx.dtag.de Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.01DT [de] (Win16; I) Version 2.0, 7 July 1996 Beware: The following information is my private knowledge and not guaranteed to be correct or complete! Chipset stepping: The stepping (revision) of the main two chips SiS496 and SiS497 must be B2 or higher to support PnP BIOS. The 496 + 497 chips must have the signs NU + NS (B2), NV + NS (B3) or NV/(QT) + NU/(QR) (B4) printed on them. MU + MW (A4 stepping) does not support PnP BIOS. For details see http://asustek.asus.com.tw/Products/TB/486-0009.html . Board revision: As far as I know PnP is supported by any board revision of PVI-486SP3 (if the chipset stepping is B2 or higher). I successfully updated a board with revision 1.2. Type of FLASH EPROM: The FLASH EPROM must be a SST PH29EE010 or a Winbond W29EE01 (programmable with +5V). Other +5V and all +12V (e.g. Intel P28F010) types are not supported. Flashing the EPROM: If the type of FLASH EPROM on the motherboard is correct the new BIOS version can be programmed ("flashed"). For this the DOS tools PFLASH.EXE must be used. The system must be started in real mode without any device drivers, autoexec.bat or config.sys. So it is recommended to boot with an "empty" floppy. Carefully follow the instructions! Else the system will not boot again! For flashing the binary file with the latest BIOS revision SI4I0305.AWD should be used. This BIOS revision includes all fixes of the older revisions. PFLASH.EXE and SI4I0305.AWD can be downloaded from http://www.asus.com.tw/Products/BIOS/bios-486.html or one of the ASUS mirror sites. For flashing the jumpers JP32/ JP33 MUST be set to the positions 1&2/ 2&3 ("5V EPROM"). The diagram in the ASUS User's Manual (Revision 1.4) is wrong. Buying a new FLASH EPROM: If the current FLASH EPROM is not of the correct type, the old EPROM shall be saved or something went wrong during flashing, a new FLASH EPROM can be ordered from the national ASUS branch (see: http://asustek.asus.com.tw/contact.html ; in Germany: ASUS Computer GmbH, Harkortstr. 25, 40880 Ratingen, Tel: 02102-445011, Fax: 02102-442066, for about DM 27,00). It must be ordered "latest Plug & Play BIOS for PVI-486SP3" and will be shipped within a few days. When you replace the old EPROM chip with the new one beware of static electricity! The jumpers JP32/ JP33 MUST be set to the positions 1&2/ 2&3 ("5V EPROM", the diagram in the ASUS User's Manual, Revision 1.4 is wrong) else PFLASH will not recognize the correct type of FLASH EPROM and refuse flashing. Plug & Play operation: At boot time the Plug & Play BIOS extension will configure all PnP cards. To do so it must write-access the ESCD area of the FLASH EPROM. For this the jumpers JP32/ JP33 MUST stay in the positions 1&2/ 2&3 ("5V EPROM"). The chipset together with the PnP BIOS will write protect the FLASH EPROM during normal operation. For details read http://asustek.asus.com.tw/FTP/ASUS/TechInfo/flash-pnpbios.txt. If there is something wrong with the type of the FLASH EPROM or the jumper settings the PnP BIOS will report "ERROR -- Can't Write ESCD" while booting. To configure non-PnP ISA cards for DOS or Windows 3.1x use the driver DWCFGMG.SYS and one of the ICU tools (ICU.EXE or WINICU.EXE) from Intel (The latest version is 1.44 and can be downloaded from ftp://ftp.intel.com/pub/support/oem_developer/motherbd or from ftp://ftp.funet.fi/pub/hw/vendors/intel/support/oem_developer/motherbd in Europe). They directly save the configuration data to the FLASH EPROM. So the File ESCD.RF in the root directory is no longer used. If you are interested in Plug-&-Play principles you may read some articles from Intel (http://www.intel.com/ial/plugplay) or download the PnP specifications from ftp://ftp.microsoft.com/developr/drg/Plug-and-Play/Pnpspecs for details. Other ASUS pages: The home page of ASUS Taiwan is http://asustek.asus.com.tw. More technical information you will find at http://asustek.asus.com.tw/Products/techinfo.html, FAQs at http://asustek.asus.com.tw/Products/TB/qa-486.html. ASUS mirror sites are listet at http://asustek.asus.com.tw/Products/mirror.html. http://asustek.asus.com.tw/Products/news.html is the ASUS News Archiv. Many thanks to the ASUS technical support and the contributors to this newsgroup! Enno Gruenefeld (enno.gruenefeld@t-online.de) Path: asustek.asus.com.tw!voyager.iii.org.tw!nctuccca.edu.tw!howland.reston.ans.net!newsfeed.internetmci.com!hunter.premier.net!news-res.gsl.net!news.gsl.net!ix.netcom.com!news From: pchalifo@ix.netcom.com(Paul Chalifoux ) Newsgroups: alt.comp.periphs.mainboard.asus Subject: Help - memory problem with P54SP4 Date: 7 Jul 1996 20:40:24 GMT Organization: Netcom Lines: 25 Message-ID: <4rp7bo$sac@sjx-ixn4.ix.netcom.com> NNTP-Posting-Host: ron-ny7-03.ix.netcom.com X-NETCOM-Date: Sun Jul 07 1:40:24 PM PDT 1996 Hi - I own 4 ASUS PCI/I-P54SP4 90 MHz Pentium mainboards with 8MB RAM that I would like to upgrade to 16MB. Each machine contains 2 - 4MB double-sided simms. When I took 2 simms from one machine and installed them into another, the system only recognized the 8MB of original memory. I have the RN11/12 resister set to double sided. According to the manual on page 2-7, 4MB simms must be single sided. Is there a way for me to upgrade my machines to 16MB and preserve my current investment in memory? To get my machines to 16 MB will I have to replace my double-sided 4MB simms with single sided 4MB simms or double-sided 8MB simms? Thank You Paul Chalifoux pchalifo@ix.netcom.com