----------- Log-EQF Version 8.00 ------------- Released May 9, 1996 --------

 Versions compiled on May 14th or later include the Summer 96 release of
 DOSLOGAC (version 3) for the new Radio Amateur Callbook CD-ROM.  Also
 is a corrected FT1000MP.RIG file and a fix for disappearing calls when
 going to the TNC from logging screen.

 May 23, 1996 - Fixed SET-EQF module problem that prevented first program
 to run from SHELL menu from being changed.  Also added "W" QSL STATUS to
 the WAS and DXCC summary displays and prints.

 --- Version 8.01 May 27, 1996 ---

 Set TIME OFF same as TIME ON for edit or manual QSO entry, whenever time
 off is changed.

 Add "<" and ">" to operators permitted for a SEARCH.  For example, you can
 now find all POWER entries lower than 50 watts in your log by searching for
 "<50" in the power field.

 Added 1296 MHz to the frequency selection menu.

 Added "W" to show stations worked but not QSL'd when using the Registered
 User DXCC and WAS utilities to display QSL STATUS SUMMARY.

 --- Version 8.02 June 4, 1996 ---

 Strip trailing NULL character from parameters passed to another program,
 when a single empty parameter is passed; in other words if you call the
 GOLIST program with no callsign entered it works again.

 Add QSL STATUS to conditions checked for deleting a duplicate entry when
 doing a SORT by DATE & TIME.  If QSL STATUS is the same when CALLSIGN and
 DATE & TIME match for consecutive QSO's, or if QSL STATUS is "blank" in
 this condition, the duplicate entry is deleted.

 --- Version 8.03 June 8, 1996 ---

 Change to <F10> for manual frequency and mode retrieval from rig interface,
 to clear COM buffer each time.

 Slight change to CW KEYER timing.

 Refine the lookup for DXCC and WAS so the highest QSL STATUS possible is
 always returned for each country or state, respectively.

 Improvements made to File-EQF IMPORT/EXPORT utility for CT, NA, and TOTALHAM
 file import.

 --- Version 8.04 June 12, 1996 ---

 Fixed problems with CW KEYER timing in Windows and with 8088 CPU's (but not
 both at the same time [HI]!).

 --- Version 8.05 June 15, 1996 ---

 Fixed a bug with logbook MERGE feature that would mess up the notepads.

 Changed logic for CW KEYER so if option for numeric keypad is enabled, it
 works from keyer screen as well as from logging screen.

 Fixed lookup of MASTER.LOG; it would not work unless another callsign
 database was also present.

 --- Version 8.06 June 20, 1996 ---

 Fixed a bug in the logbook BACKUP routine that would fail if log name was
 only 1 or 2 characters in length.

 Added a command-line switch to inhibit the COM port FIFO buffers.   The
 switch is "/NOFIFO", which inhibits the automatic detection of COM port
 UART types and does not attempt to turn on the FIFO buffer regardless of
 UART chip type.

 June 30, 1996: Modified WAS and DXCC routines so if a logbook is sorted by
 other that date, the records for WAS and DXCC are not changed; the oldest
 QSO for a given QSL STATUS is always used.  Also, ARRL CHECKED on hardcopy
 printouts is now printed as "Y", as some printers could not handle the
 checkmark used previously.

 --- Version 8.07 July 8, 1996 ---

 Improved resolution of beam headings with grid squares.

 Improved mouse cursor redraw for full-screen windows on TNC screen.

 Improved CW KEYER buffering of multiple key hits when sending memories via
 the auxiliary keyboard.

 --- Version 8.08 July 12, 1996 ---

 Added display of selected date format to DXCC and WAS edit screen.  Better
 logic for detecting like prefixes for different countries in DX-EQF too.

 --- Version 8.09 July 15, 1996 ---

 Corrected problem with updating PREFIX.LIB library after seeing a "NOT IN
 LIBRARY" report on the logging screen.

 Added new command-line option for TNC AUTOLF, which outputs additional <CR>
 <LF> combination at end of each line of text.  Start program for this by
 typing LOG /AUTOLF.

 Corrected problems with DXCC country lookup when paging through EDIT
 callsigns.

 --- Version 8.10 July 19, 1996 ---

 Added logic to guard against bogus grid squares being used for beam heading
 and distance calculations.  Also similar logic for portable callsigns so
 callsign database addresses aren't used for country display.

 Changed the prompt for one-line vs. detailed PRINT, so you are asked first
 which format you want.

 --- Version 8.11 July 26, 1996 ---

 Added better QSL label printing control, at the request of the CY0AA
 DXpedition (who logged nearly 16,000 QSOs with Log-EQF).  Can now fit up
 to 3 QSOs per label with 1-across or 2-across label forms, and you can
 pause in the middle of a label print operation and later resume printing.
 Also display a relative progress indicator and how many labels have been
 printed on the screen.

 Fixed problem with MASTER.LOG and ERROR 52-4 when printing address labels
 from the EDIT screen.

 Included the new BUCKTSR (version 2.0) for the BuckMaster HAMCALL CD-ROM.

 --- Version 8.12 July 28, 1996 ---

 Improved DX-EQF (V3.73) so when doing an AUTOMATIC UPDATE, you won't be
 prompted to make a decision about a country already in the log with a
 country name entered.

 Fixed a bug I created in V8.11, which prevented country name from being
 updated when a DX SPOT is recalled from the PacketCluster.

 Fix problems with <F5> selection while cursor is on the CALLSIGN field.

 --- Version 8.13 August 1, 1996 ---

 Clear grid square after a previous QSO entry is cleared, and recheck the
 country to see if it might be eligible for a DELETED COUNTRY status when
 DATE ON is changed during manual or edit operation.

 Improvements in memory management when program has to SHELL to another
 program.

 --- Version 8.14 August 5, 1998 ---

 Some code changes in an attempt to eliminate scattered ERROR 14 reports.