Paradise Accelerator Card for Windows

                 Windows 3.1 Driver Installation Information

                              and Driver List


If you are installing the Paradise Accelerator Card for Windows 3.x drivers
for the first time, you may disregard the installation information below.
Please refer to the user manual for installation instructions.

If you have previously installed an earlier version of Paradise Windows 3.x
drivers, you must make some modifications to your Windows setup before
installing the latest version of Windows 3.1 drivers.  Without these
modifications, unexpected results may occur.

Follow these steps:

1.  Using Windows Setup either from within Windows or from the DOS prompt,
    select the standard VGA driver for your display.  To do this from Windows,
    first select the Windows Setup icon, and then choose Options.  Next,
    select Change System Settings and then select VGA from the list of options
    for Display.

    If you are at the DOS prompt, change your directory to C:\WINDOWS, type
    SETUP and press <ENTER>.  Select the Display choice and then select VGA
    from the list of available options.  Finally, select Accept the
    Configuration.

2.  If you are not already within Windows, enter the Windows Main screen and
    delete the Paradise icon (if present).  This is done by clicking once on
    the Paradise icon and then selecting Delete from the File Menu.

3.  Either through the Windows File Manager or from the DOS prompt, delete all
    of the following files that are present.  The files are located in the
    Windows System sub-directory, e.g., C:\WINDOWS\SYSTEM\

    HVGA1024.DRV
    HVGA1280.DRV
    HVGA640.DRV
    HVGA800.DRV
    HVGA960.DRV
    MMWD480.DRV
    MMWD600.DRV
    MMWD768.DRV
    NMMWD480.DRV
    NMMWD600.DRV
    NMMWD768.DRV
    P32K400.DRV
    P32K480.DRV
    P32K600.DRV
    PVGA600.DRV

4.  Either through the Windows File Manager or from the DOS prompt, delete all
    of the following files that are present.  The files are located in the
    Windows directory, e.g., C:\WINDOWS\

    WDSETUP.BMP
    WDSETUP.EXE
    WDSETUP.HLP
    WDSETUP.INF

5.  At this point you are ready to install the Windows 3.x drivers as
    described in the Paradise Accelerator Card for Windows User Manual.
    Please refer to the Software Installation section for complete
    instructions on installing the new drivers.
===========================================================================
Disk File List

The following is a list of the files on this disk.


        Windows 3.1 Drivers

        HVGA1024.DRV            1024x768x16
        HVGA1280.DRV            1280x1024x16
        HVGA640.DRV             640x480x16
        HVGA800.DRV             800x600x16
        HVGA960.DRV             1280x960x16
        MMWD480.DRV             640x480x256  Full Gamma
        MMWD600.DRV             800x600x256  Full Gamma
        MMWD768.DRV             1024x768x256 Full Gamma
        NMMWD480.DRV            640x480x256  1st 20 Color Gamma
        NMMWD600.DRV            800x600x256  1st 20 Color Gamma
        NMMWD768.DRV            1024x768x256 1st 20 Color Gamma
        P32K400.DRV             640x400x32K
        P32K480.DRV             640x480x32K
        P32K600.DRV             800x600x32K
        PVGA600.DRV             800x600x256


        Western Digital Setup files

        WDSETUP.BMP
        WDSETUP.EXE
        WDSETUP.HLP
        WDSETUP.INF


        Windows 3.1 Fonts


        8514FIX.FON
        8514OEM.FON
        8514SYS.FON
        CGA40WOA.FON
        CGA80WOA.FON
        COURE.FON
        COURF.FON
        DOSAPP.FON
        EGA40WOA.FON
        EGA80WOA.FON
        SERIFE.FON
        SERIFF.FON
        SMALLE.FON
        SMALLF.FON
        SSERIFE.FON
        SSERIFF.FON
        SYMBOLE.FON
        SYMBOLF.FON
        VGAFIX.FON
        VGAOEM.FON
        VGASYS.FON


        Windows 3.1 support files

        VDDPVGA.386
        PVGA.GR2
        V7VGA.3GR