PRODUCTS FOR XT SYSTEMS XT - HARD DISK DRIVES AND CONTROLLER SOLUTIONS COMBINED FILECARD 20 - Self-contained 20 megabyte hard disk drive mounted with a controller card for simple installation. The Filecard plugs directly into one of the expansion slots in your computer, giving you additional program and data storage space. FILECARD 30 - Same as Filecard 20, but it has a 30 megabyte storage capacity. FILECARD 40 - Same as Filecard 20, but it has a 30 megabyte storage capacity. WD20iX- Western Digital's 20 Megabyte FileKit is a complete hard disk for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Integrated Drive and adapter card, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC-DOS or MS-DOS 2.0 or greater. WD40iX - Western Digital's 40 Megabyte FileKit is a complete hard disk kit for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Drive and controller board, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC- DOS or MS-DOS 2.0 or greater. WDPS25/20iPLUS - Western Digital's 20 Megabyte FileKit is a complete hard disk kit for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Drive and controller board, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC-DOS or MS-DOS 2.0 or greater. TITAN 20 MEG INTEGRATED DRIVE - WD93028-X - Half-height 20 megabyte hard disk drive with the drive and the controller electronics mounted to the hard disk assembly. It features: 2 heads, 782 cylinders, XT port compatibility, 7.5 megabyte per second data transfer rate, 40-pin IDE (Integrated Drive Electronics) connector and RLL encoding. The system must support an IDE connector or an adapter card (such as the WDXT140) must also be installed. TITAN 40 MEG INTEGRATED DRIVE - WD93048-X - Half-height 40 megabyte hard disk drive with the drive and the controller electronics mounted to the hard disk assembly. It features: 4 heads, 782 cylinders, XT port compatibility, 7.5 megabyte per second data transfer rate, 40-pin IDE (Integrated Drive Electronics) connector and RLL encoding. The system must support an IDE connector or an adapter card (such as the WDXT140) must also be installed. TITAN ADAPTER CARD WITH BIOS - WDXT140 - The adapter card is used to connect IDE drives to systems that do not have an on- board connector. It enables the 40-pin connector on the integrated drive to transfer data to the XT BUS. This card includes the latest XT ROM BIOS that supports non-standard drive types, virtual drive formatting, dual drive operation, bad track formatting and dynamic formatting. PRODUCTS FOR AT SYSTEMS HARD DISK DRIVES AND CONTROLLER SOLUTIONS COMBINED FILECARD 20 - A self-contained 20 megabyte hard disk mounted with a controller card for simple installation. The Filecard plugs directly into one of the expansion slots in your computer, giving you additional program and data storage space. FILECARD 30 - Same as the Filecard 20, but it has a 30 megabyte storage capacity. FILECARD 40 - Same as the Filecard 20, but it has a 40 megabyte storage capacity. WD20iX - Western Digital's 20 Megabyte FileKit is a complete hard disk kit for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Integrated Drive and adapter card, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC-DOS or MS-DOS 2.0 or greater. WD40iX - Western Digital's 40 Megabyte FileKit is a complete hard disk kit for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Drive and controller board, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC- DOS or MS-DOS 2.0 or greater. WDPS25/20i PLUS - Western Digital's 20 Megabyte FileKit is a complete hard disk kit for IBM XT, AT and compatibles and for IBM PS/2 Models 30 and 30-286. The kit includes a Western Digital Drive and controller board, mounting cables, front bezel and LED, a user installation guide and a one year warranty. It requires PC-DOS or MS-DOS 2.0 or greater. -2- ATLAS 20 MEG INTEGRATED HARD DRIVE (93028A OR 95028A) - Western Digital's 20 megabyte hard disk drive incorporating the drive and controller electronics on a single printed circuit board which is mounted directly on the hard disk drive. This integration results in enhanced reliablility and a lower system cost. Available in 3 1/2 " or 5 1/4". It features: 4 heads, 782 cylinders, AT port compatiblity, 7.5 Megabits per second data transfer rate, and a 40-pin IDE connector. The system must support an IDE connector or an adapter card (such as the WDAT140) must also be installed. ATLAS 40 MEG INTEGRATED HARD DRIVE (93048A OR 95048A) - Western Digital's 40 megabyte hard disk drive incorporating the drive and controller electronics on a single printed circuit board which is mounted directly on the hard disk drive. This integration results in enhanced reliability and a lower system cost. Available in 3 1/2" or 5 1/4". It features 4 heads, 782 cylinders, AT port compatibility, 7.5 Megabits per second data transfer rate, and a 40 pin IDE connector. The system must support an IDE connector or an adapter card (such as the WDAT140) must also be installed. WDAT140 - It enables the 40-pin connector on the integrated drive to transfer data to the AT Bus. It plugs into a single slot and is necessary when installing an integrated drive into a computer that does not have a 40 pin connector on the motherboard. WDAT240 - It enables the 40-pin connector on the integrated drive to transfer data to the AT Bus. This interface card supports dual speed floppy disk drives. It is a 16-bit, bi-directional, fully buffered adapter card with a standard 40-pin connector. The adapter card is used to connect IDE drives to systems that do not have an on-board connector. WDAT440 - It enables the 40-pin connector on the integrated drive to transfer data to the AT Bus. This interface card supports a floppy controller, two serial ports and one parallel port. It is a 16-bit, bi- directional, fully buffered adapter card with a standard 40-pin connector. The adapter card is used to connect IDE drives to systems that do not have an on-board connector.