ARTISOFT LANtastic/AI Compatibility List                                           7/1/91

ARTISOFT's Adapter Independent version of the LANtastic Network
Operating System is designed for use with non-ARTISOFT network
adapters which conform to NetBIOS standards.  Some NetBIOS drivers
are provided with LANtastic/AI by ARTISOFT as noted below.  This
list consists only of products which have been tested in house with
LANtastic/AI and will be updated as necessary.  PLEASE NOTE: This
list was not designed to determine compatibility with NOS/AI; a
separate list for that product is available.  In most cases,
NetBIOS drivers listed on the NOS/AI compatibility list will work
correctly with LANtastic/AI but have not been tested by Artisoft. 

NetBIOS Drivers provided by ARTISOFT 
- 3C503MM.EXE v2.02
  3Com 3C503 in memory mapped mode

- ARCNET.EXE v2.02 (generic ARCNET driver)
  Adapters supported with this driver:
  Standard Micro Systems:
    PC220 rev A
    PC550WS rev C
    PLEASE NOTE: There are two versions of the PC500WS, with no
     distinction in the model name. The longer board (6.2" vs 5")
     does not use a RAMBASE address and is NOT compatible with
     LANtastic/AI.
  Datatech Enterprises Company:
    PCI-001
  Thomas-Conrad:
    TC6045 AT rev C
    TC6142 rev C
  CNet:
    ARCNET 120A rev A

- NEX000.EXE v2.02 (Novell compatible driver)
  Adapters supported with this driver:
  ACCTON:
    EtherCoax-8 model en1809
    EtherCoax-16 model en1603-n2 
  Artisoft:
    AE2 in NE2000 mode rev C and above
    AE3 in NE2000 
  CNet:
    Ethernet 100E rev D
    Ethernet 600E rev B 10BaseT
  Novell 
    NE1000
    NE2000 rev H
    NE/2 Micro Channel rev H
  Shureman:
    NE-1 rev 1A
  Tiara:
    LANcard/E*2000 rev B
    LANcard/E 8 bit adapter
- PATCC.COM v2.02 for Xircom's PA02B6-8K Pocket ARCnet Adapter

- PE.EXE v2.02 for Xircom's Pocket Ethernet PE10B2-8K

- SMCARC.EXE v2.02, Standard Microsystems
  Adapters supported with this driver:
  SMC PC220 rev A
  SMC PC500WS rev C
  PLEASE NOTE: There are two versions of the PC500WS, with no
   distinction in the model name. The longer board (6.2" vs 5")
   does not use a RAMBASE address and is NOT compatible with 
   LANtastic/AI.

- TCARC.EXE v2.02, Thomas Conrad
  Adapters supported with this driver:
  TC6045 AT rev C
  TC6142 rev C
  TC6042
  TC6046 (micro channel)

- WD8003.EXE v2.02
  Adapters supported with this driver:
  Western Digital:
    Coaxial Ethernet:
       WD8003EBT rev X0   EtherCard Plus w/ boot ROM socket (8 bit)
       WD8003ET/A         EtherCard Plus/A for Micro Channel
       WD8003E            EtherCard Plus (8 Bit)
       WD8003EB           EtherCard Plus w/ boot ROM socket (8 bit)
       WD8003E/A          EtherCard Plus for Micro Channel
       WD8013EBT rev X0   EtherCard PLUS16 w/ boot ROM socket (16
                          bit)
       WD8003EP           Standard Ethernet EtherCard Plus Elite
       WD8013EP           EtherCard Plus Elite16 Combo
    Twisted Pair Ethernet:
       WD8003WT           EtherCard Plus (LattisNet compatible, not
                          10BaseT)
       WD8003W            EtherCard Plus10  (8 bit, 10BaseT)
       WD80BEW            10BaseT and Standard EtherCard Plus Elite
       WD8013W            10BaseT Ethernet EtherCard Plus Elite16T
       WD8003W/A          10BaseT Ethernet EtherCard Plus10T/A
                          [MCA]
    StarLAN:
       WD8003S            StarCard PLUS
       WD8003SH           StarLink PLUS
       WD8003ST/A         StarCard PLUS for Micro Channel
  

ARTISOFT, Inc. makes no warranties as to the completeness or
accuracy of this document. LANtastic is a trademark of ARTISOFT,
Inc.  Brand names and product names are trademarks or registered
trademarks of their respective companies. If you do not currently
own an ARTISOFT product, additional questions may be forwarded to
our Sales Department at (602) 293-6363.