To One and All: Re: Quarterdeck's MANIFEST program! Manifest v1.01 does work with DOS5 on my 386sx;AMI bios late '89 version. Below find the stats. This is in response to Jim Byram's note of 6/21/91 called DOSQEM.TXT. However, Manifest v1.01 continues to hang my 286 with AMI bios 3/3/89. ACTUAL REPLICA THE LAULICHTS COMPUTER CONSUMER CONSULTANTS Reg. # deleted System / Overview 386 Clone Processor 80386 Video Adapter VGA BIOS AMI BIOS Date 08/30/89 Coprocessor None Keyboard Enhanced Parallel Ports 1 Serial Ports 3 Total Available Conventional Memory 636K 591K Expanded Memory 1616K 448K Extended Memory 5504K 0K THE LAULICHTS COMPUTER CONSUMER CONSULTANTS Reg. # deleted DOS / Overview DOS version 5.00 Kernel: 8.2K* Memory Area Size Description Drivers: 0K 0070 - 0134 3.1K IO Base Data: 15K 0135 - 027C 5.1K MSDOS Added Data: 1.5K 027D - 04EF 9.8K DOS Data Total: 25K 04F0 - 0572 2K 35 FILES 0573 - 05A4 0.8K DOS Data FILES=50 05A5 - 05E7 1K Drive List FCBS=16,8 05E8 - 065C 1.8K DOS Stacks BUFFERS=30 =====Base data ends at 25K====== LASTDRIVE=L 0800 - 0825 0.6K 10 FILES STACKS=9,128 D7CD - D808 0.9K 16 FCBS HMA 64K 30 BUFFERS * Includes: 5 FILES Our Autoexec & config were uploaded last week into a little file called DOS5MEM1.ZIP along with some comments. It is my belief, at least on the 386SX that there is an interupt conflict twix Manifest and Smartdrv. When smartdrv was loaded into high memory...Manifest began working normally again. Still troubled about 286! Lois Laulicht Valley Head, WV June 23, 1991