README file for Microsoft Excel Working Model

SETUP information
-----------------
Setting up the Working Model of Microsoft Excel is done via a batch
file on the SETUP DISK called SETUP.BAT.  SETUP.BAT will copy the required 
Microsoft Excel files to a directory called XLDEMO on your hard disk.  By 
default, SETUP assumes your hard disk is drive C: and your floppy drive 
is drive A:.

If your system is different than this, SETUP accepts up to 2 command line 
arguments.  The first argument indicates your hard drive letter, the second 
indicates your floppy drive letter.  For example, if your hard disk is 
drive C: and your floppy drive is drive B:, you would invoke setup by 
typing "B:SETUP C: B:" and pressing the ENTER key.

Hardware Requirements
---------------------
Microsoft Excel requires 640kb of conventional memory.  In addition, you 
must have a full version of Microsoft Windows 2.03 or later to run this 
version of Microsoft Excel.

Additional SETUP Note
---------------------
The SETUP.BAT batch file is provided for convenience only.  If you wish, 
you can manually copy all the files on the SETUP DISK to any directory on 
your hard disk.  Once this is done you can start Microsoft Excel as you 
would start any Microsoft Windows application.

Self-Running Demo
-----------------
This version of Microsoft Excel comes with a Self-Running Demo in 
addition to the written Guided Tour.  The Self-Running Demo shows you 
Microsoft Excel's powerful capabilities while you sit back and watch.
The written Guided Tour is a "hands-on" tour of Microsoft Excel.

- To start The Working Model of Microsoft Excel and use the 
  written Guided Tour, type EXCEL at the DOS prompt while in the 
  \XLDEMO directory and press ENTER.  See the "Guided Tour" for 
  additional instructions.

- To start The Working Model of Microsoft Excel and see the 
  Self-Running Demo, type EXCEL AUTODEMO.XLM at the DOS prompt while 
  in the \XLDEMO directory and press ENTER.