│                                                                              ││                            Main Screen Options                               ││         While on the main screen you have three options:                     ││                                                                              ││    [L]  Label disks.  This is the option you'll probably use most.           ││         If you just press [Return] this is the choice you'll select.         ││         You should have a disk in the indicated disk drive.                  ││      >>>>> Pressing [A] or [B] directly labels drive A: or B: <<<<<          ││                                                                              ││    [C]  Configure Labelier.  This option allows you to change several        ││         of the defaults (i.e., Colors, Printer, drive, etc.)                 ││                                                                              ││    [Q]  Quit Labelier and return to DOS.  Use this option when you are       ││          all finished labelling disks.                                       ││                                                                              ││    [R]  Repeat-When this shows, [R] repeats the most recent label again.     ││                                                                              ││    [ NOTE: From any prompt, press [F1] for context-sensitive help... ]       ││               [ [Ctl-Z] toggles Zooming Windows ON/OFF ]                     ││                                                                              ││                                                                              ││                           Entering Label Text                                ││                                                                              ││         The ≡≡≡≡≡≡≡≡≡≡≡≡ window defines the typing area where the user       ││    may enter the text.  The Title is sized to fit centered on the            ││    selected label, printed in Bold, Wide letters.  You may use any           ││    character in your label name.  The window will scroll as you              ││    reach the end for longer text.  Comments will be printed in the same      ││    size text as filenames and will stretch across one whole row.             ││                                                                              ││        >>> The following keys can be used to edit text  <<<                  ││    [Home] - Beginning of Label    [Ins]   - Toggle Insert Mode On or Off     ││    [End]  - End of label          [Del]   - Delete one char-move line left   ││    [Ctrl][Home] - Del to Beg Line [Ctrl][End] - Del to End of Line           ││    [] - Cursor one character right  [Ctrl][] - Cursor one word right       ││    [] - Cursor one character left   [Ctrl][] - Cursor one word left        ││    [Esc] - Exit to Main Screen    [F4] - Change Cat Drive Volume Label       ││    [F2] - Use Previous Label      [F3] - Use volume label from the disk      ││    [Bksp] - Insert mode:  deletes char left - Overtype Mode:  []            ││       (WordStar(tm) control keys works as synonyms for keypad)               ││                                                                              ││                        Printer Alignment Instructions                        ││                                                                              ││                  Align the printhead as illustrated below:                   ││                  ┌─┴────────────────────────────────────┴───                 ││                  │paper0 bail   10        20        30                       ││                  └─┬───┼────┴────┴────┴────┴────┴───┬┴──┬┴──                 ││                    │ o └────────────____────────────┘ o │                    ││                    │ o ┌────────── / .  \ ──────────┐ o │                    ││                    │ o │          │  :─┐│      ┌──│ o │                    ││                    │ o │ Print    │      │      │   │ o │                    ││                    │ o │   Head──│ pins┘│   labels │ o │                    ││                    │ o └──────────└──────┘──────│───┘ o │                    ││                    │ o ┌────────────────────────│───┐ o │                    ││                    │ o │                        └──│ o │                    ││                                                                              ││          Since you may not be able to see the printhead pins, you            ││          may have to experiment until you find just the right setting.       ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                             Printer Error Help                               ││                                                                              ││         You have experienced an error with the printer.  Some of the         ││    possible causes of the problem may be:                                    ││                                                                              ││                        Printer is off line.  (Press Select button.)          ││                        Printer is turned off.                                ││                        Printer is jammed or out of paper.                    ││                        Wrong Printer Port is installed.                      ││                        Printer cable is not connected.                       ││                                                                              ││    Please correct the problem and attempt to print again.  If this fails,    ││    you will need to exit Labelier and troubleshoot your printer more         ││    thoroughly.  You may need to configure Labelier for a different printer   ││    port if you are using other than the standard printer port (LPT1).        ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                              Disk Error Help                                 ││                                                                              ││       You have experienced an error with the disk drive.  Some of the        ││       possible causes of the problems may be:                                ││                                                                              ││               There is no disk in the drive.                                 ││               The drive door is open.                                        ││               This disk is unformatted or bad.                               ││               The wrong disk is listed as the Catalog Drive.                 ││                                                                              ││     Please correct the problem and try again.  Try a new disk which has      ││     previously checked as good.  Ensure that the disk is inserted in the     ││     disk drive correctly, with the label toward the door latch.  If none     ││     of this solves the problem, check to ensure that the right drive         ││     is configured.                                                           ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                           Configuration Routine                              ││                                                                              ││         At this point you may configure the program for your specific        ││    preferences and equipment.  You can choose another drive in which         ││    to place the disks for labelling.  You can select another label           ││    size or even install a different printer.  When done, you can             ││    write a new Labelier configuration file with your settings.               ││                                                                              ││         [D]  to select a new disk Drive for labelling disks.                 ││         [L]  to change the label values (size, spacing, control codes)       ││         [C]  to choose new colors for Foreground or Background               ││         [P]  to install a new Printer or Printer Port                        ││         [F]  to write or read a configuration file                           ││         [B]  to toggle the error Bell sound on and off.                      ││        [Esc]/[Q] to Quit and return to main screen                           ││                                                                              ││               [ [Ctl-Z] toggles Zooming Windows ON/OFF ]                     ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                       Labelling Disk Drive Selection                         ││                                                                              ││         Use this selection to change the drive in which you insert           ││    your disks for labelling.  Normally for floppy disks, choose              ││    drive A or B.  If you wish to make a label for your Hard Disk,            ││    choose C or D (or whatever drive your hard disk is named), but            ││    I don't recommend trying to apply it!!                                    ││                                                                              ││         Simply press the letter of the drive and then answer                 ││         [Y] or [Return] when the question "Drive x is the                    ││         labelling drive?  (Y/N) [Y]" question appears.                       ││                                                                              ││         If you press the wrong Drive letter, just answer [N]                 ││         and choose another drive, etc.                                       ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                          Label Size Configuration                            ││                                                                              ││         Use this option to select another size label.  The three label       ││    sizes currently supported are:                                            ││       Small:    1 x 3 1/2                                                    ││            Holds 4 cols x 11 files per column =  44 files                    ││       Large:  1 1/2 x 4                                                      ││            Holds 5 cols x 18 files per column =  90 files                    ││      Custom:  1 x 5  (changeable in the Configure routine)                   ││            Holds 6 cols x 11 files per column =  66 files                    ││         Press  [L]  to select the Large label.                               ││         Press  [S]  to select the Small label.                               ││         Press  [C]  to select/modify/install the Custom label.               ││         Press  [P]  to print a Test Label of the Selected Size.              ││                     (This option only while in LablInst.exe)                 ││         Press [Esc] to Quit and return to the other configuration options    ││     (Notice the Currently Selected label changes as you change sizes.)       ││                                                                              ││                                                                              ││                       Changing the Label Parameters                          ││ [PgUp]^R - Top selection        [Ins]^V - Toggle incr/decr by 1 or 5         ││ [PgDn]^C - Bottom selection       [P]   - Print a Test label using values    ││   []^E - Up one selection        []^X - Down one selection                 ││   []^D - Increment value by 1/5  []^S - Decrement value by 1/5 (see Ins)   ││   [-]   - Toggle Show Date        [+]   - Toggle Show Disk free space        ││   [Q] or [Esc] - Exit back to previous menu                                  ││     _______________________________                                          ││    │       LABEL TITLE  ────┐    ┌ Distance from the top of one           ││    │ Filename.1 _             │  ├──┴ label to the top of the next.          ││    │ Filename.2  ─────────┐ │  │                                           ││    │    :                   │ └─────┬ Distance from the top of the Title     ││    │_Filename.6_____________│___ │  └ to the Top of the 1st filename.        ││     ________________________│_____                                          ││    │ all values in vertical │        ┌ Distance from top of one              ││    │        units           └────────┴ filename to top of next.              ││       Experiment with a combination of Label Parameters and the Printer      ││    Values Installation option until you find the proper match for your       ││    custom label.                                                             ││                                                                              ││                                                                              ││                            Custom Label Options                              ││                                                                              ││         At this point, you may [A]ccept the Custom values and,               ││    install them, or choose to change [L]abel parameters or change            ││    the [P]rinter codes.  The following provides a brief description          ││    of what you can change in each area:                                      ││                                                                              ││      [P]rinter values -- this area allows you to install printer             ││                control codes for Condensed mode, Superscript mode            ││                Wide mode, micro-line spacing, etc.                           ││      [L]abel values   -- this selection allows you to change the             ││                label parameters, such as Number of Files per                 ││                Column, Title height, Vertical units per inch.                ││                                                                              ││           You can get more help after you press a change option.             ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                        Printer / Port Installation                           ││                                                                              ││         This option allows you to install either the Printer or the          ││    Printer Port.  If you have the right printer installed, but have          ││    the wrong printer port installed, you may install LPT1, LPT2,             ││    LPT3, PRN, COM1, COM2.  When you install a new printer, ensure            ││    you then install the correct printer port.                                ││                                                                              ││       [P] - Install a new printer                                            ││       [O] - Install a different printer port                                 ││               (defaults to LPT1)                                             ││       [V] - Install/change printer values                                    ││       [Q] to return to the other configuration options)                      ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                                                                              ││                      Printer Value Installation Help                         ││    [Home] - Beginning of Line        [End]    - End of Line                  ││ [Ctrl][Home] - Del to Beg of Line  [Ctrl[End] - Del to End of Line           ││    [PgUp] - Top selection    (^R)    [Ins]    - Toggle Insert on/off (^V)    ││    [PgDn] - Bottom selection (^C)    [Del]    - Delete char-move line left   ││     []   - Up one selection (^E)     []     - Down one selection   (^X)    ││   []/[] - Move cursor 1 chr    [Ctrl][]/[] - Move cursor 1 word          ││ [Ctrl][S]/[Ctrl][D] =  []/[]    [Ctrl][A]/[Ctrl][F] = [Ctrl][]/[]        ││   [Alt-A] - show ASCII codes        [Alt-C]   - Clear ASCII codes            ││ [Q]/[Esc] - Quit back to last menu  [Alt-P] - Print Test w/installed codes   ││   [Alt-Z] - Zoom to a wide line to see more of the characters to edit        ││  --> Enter values as decimal (0-255), hex ($0-$FF) or as quoted strings <--  ││  Enter the values directly from your printer manual as shown.  Just use      ││  single of double quotes (use single quotes if the string contains double,   ││  and vice versa).  Separate your number and strings with spaces, commas or   ││  semicolons.  Invalid entries will be deleted.   Your entry will be changed  ││  to DECIMAL VALUES and STRINGS and redisplayed next to the label.            ││    Print a test line to see if the codes for each printer feature are        ││    installed correctly, print a Test label to verify installation.           ││    (Ensure DoubleWide and Condensed CPI are set correctly.)                  ││                                                                              ││                                Color Change                                  ││                                                                              ││         Use this selection to change the normal colors used for the          ││    foreground and background.  As you toggle through the colors,             ││    the prompt will change colors to show you how the colors look.            ││    Here are the colors available for Foreground and Background:              ││                                                                              ││         Foreground and Background       Foreground only                      ││          0     Black                    8    LightGray                       ││          1     Blue                     9    LightBlue                       ││          2     Green                   10    LightGreen                      ││          3     Cyan                    11    LightCyan                       ││          4     Red                     12    LightRed                        ││          5     Magenta                 13    LightMagenta                    ││          6     Brown                   14    Yellow                          ││          7     White                   15    LightWhite                      ││                                                                              ││      (Numbers can be used for reference on a Black&White monitor.)           ││                                                                              ││                                                                              ││                                                                              ││                         Printer Installation Help                            ││                                                                              ││       Use this selection to install a new printer.  The program              ││       comes configured for the Epson and compatibles.  If you install        ││       a different printer, you may save this information in the              ││       configuration file.                                                    ││                                                                              ││       Simply choose the letter of your printer and then answer               ││       the question: "Install choice x for the printer? (Y/N) [Y]"            ││       with a [Y] or [Return] if that is the correct choice.  Else,           ││       answer [N] and choose another printer.                                 ││                                                                              ││       When you install the printer, the name of that printer will then       ││       appear on Labelier's  main screen when you return from the             ││       configuration options.                                                 ││                                                                              ││       You may customize the printer codes at this point, also.               ││                                                                              ││                                                                              ││                                                                              ││                  Labelier Mini-Configuration Routine                         ││                                                                              ││         In Labelier, you may configure the following items on the fly:       ││    Labelling Disk Drive, Colors, Bell on/off.  If you wish to do more        ││    extensive configuration, choose the [I]nstall program selection to        ││    run the Full Configuration Program, LablInst.exe.    You must have        ││    LablInst.exe in the your accessible path, however.  Here are the          ││    choices at this menu:                                                     ││                                                                              ││         [D]  to select a new disk Drive for labelling disks.                 ││         [C]  to choose new colors for Foreground or Background.              ││         [L]  to change the Label size (Large, Small, Custom)                 ││         [S]  to Shell to DOS temporarily.  EXIT returns to Labelier.         ││         [B]  to toggle the error Bell sound on and off.                      ││         [I]  to run the Install program, LablInst.exe.                       ││        [Esc]/[Q] to Quit and return to Main Screen.                          ││                                                                              ││                                                                              ││                        Configuration File Read/Write                         ││                                                                              ││         The default configuration filename is "LABELIER.CFG" but you         ││    may enter any filename from the command line when you start both          ││    Labelier and LablInst.  Additionally, when you choose the [F]ile-         ││    [W]rite or [F]ile-[R]ead option you then have an opportunity              ││    to change the filename before you save or load the configuration          ││    file.  Just answer [N]o to the question:                                  ││                                                                              ││    Save as:  [Configuration filename]? ([Y]/[N]/[D]ir/[Q]uit) <Y>            ││                                                                              ││    and you'll get an editing window which allows you to enter any            ││    filename (including a drive or pathname, up to 255 characters).           ││       If you are about to WRITE to an existing filename, you will be         ││    asked if you wish to OVERWRITE it.  If you ask to READ a file which       ││    is not on the disk, you will see "FILE NOT FOUND" message.                ││       Choose [D]ir to get a listing of all files at the current spot.        ││    You will be able to move around the disk to find the filename.            ││       At any of the choices, you may press [Esc] to quit as well as          ││    the [Q]uit command to return to the previous menu.                        ││                       Selecting a Configuration Filename                     ││                                                                              ││         At this stage, use the keypad (or WordStar(tm) compatible keys)      ││    to move the highlighter to the filename of your choice.  Keys:            ││                                                                              ││      [Home]   - to 1st file on page     [End]    - to Last file on page      ││    [Ctl-Home] - go to first page      [Ctl-End] - go to the last page        ││      [PgUp]   - go to the next page     [PgDn]   - go to previous page       ││     []/[]   - Up/Down one file        []/[]  - Left/Right one file       ││     [Enter] or \_ If on Subdirectory, ChangeDir to that directory.           ││    [Return]    /  If on File, choose it as the Configuration file.           ││                                                                              ││         Notice that the current location is shown at the bottom of the       ││    Screen.                                                                   ││         You may go directly to a location by entering the Drive, Path-       ││    name and mask when you request a Directory.  For example, if you          ││    believe you have a configuration file on the D drive, Utils directory:    ││        enter:  D:\UTILS\*.CFG (or *.* if you want to see all files)          ││                                                                              ││        Use this feature to change to another drive also.                     ││                     Changing the Disk Volume Label                           ││                                                                              ││        You have the option of changing the Disk Volume Label when            ││    you label a disk.  Pressing [F4] gets an 11 character editing             ││    window in which you can enter a new label.  The current label             ││    is shown in the window to start.  You may edit this Volume label          ││    or change it completely.                                                  ││                                                                              ││    Notes on the Disk Volume Label:  This routine uses standard DOS           ││    function calls to change the Volume Label.  Consequently, you             ││    have to enter a legal filename for the Label.  (Some programs             ││    allow you to use upper and lower case letters, punctuation, etc.          ││    (i.e., Norton Utilities (tm)), and this program will successfully         ││    change the label FROM a Norton created label.                             ││                                                                              ││    Labelier first deletes the existing label.  So if you have entered        ││    an illegal Volume name, the original label will be deleted and            ││    there will then be NO volume label.  Just press [F4] and re-enter         ││    a legal volume name.                                                      ││                                                                              ││                                                                              │