The following instructions enable you to print the Time Traker documentation
 and install the system for immediate use:
   1. In order to print the documentation please turn your printer on.
   2. After booting your computer place the Time Traker diskette in drive A:
   3. At the DOS prompt (C>, A>, etc.) type: "TYPE A:TIMETRAK.TXT > LPT1:"
   4. This documentation is about 25 pages long.

 To install your Time Traker program on hard disk drive C:
   1. Turn on or Re-boot your computer.
   2. At the DOS prompt "C>", type: "A:INSTALL" (and press ENTER)
   3. The Time Traker program and data files will be placed in the TIMETRAK
      Sub-directory on your hard disk drive.
   4. To begin the program, type: "CD \TIMETRAK" (and press ENTER)
   5. Then type: "TTMAIN" (and press ENTER)

 To run Time Traker on a floppy disk drive:
   1. Place the disk in the floppy drive (either A: or B:)
   2. At the DOS "A>" or "B>" prompt type "TTMAIN" and press RETURN

 Note: If you are using a monochrome monitor with a graphics adapter card
       you may experience "snow" when displaying to the screen.  To eliminate
       this start the program with "TTMAIN -O".  The display may be slower.

 REMEMBER: Always use a copy of program disks and backup data often!