Lawrence Software P.O. Box 1002 Smithville, TX 78957 U.S.A. ZipTest is a utility that may be used with PC-Zipper to determine the optimum speed for your system. The utility calls each parameter procedure, executes a routine, times it, and then records the results. Upon completion, ZipTest checks to find which procedure resulted in a negligible increase in processor speed. Optimum system performance results at the "crest" of the curve. If your system has a math co-processor, ZipTest will indicate a lower result than normal and the results may be erratic. Use a command line parameter several increments higher. See the following graph example and recommendations: ³ ³ B ³ _|_ * * E ³ * | N ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» C ³ * º RECOMMENDATIONS º H ³ ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ M ³ * º PC-Jr => J º A ³ º PC => K º R ³ º PC-XT => L º K ³ * º PC-AT => H º ³ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ³ * ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ|ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A B ..... K W In this example, ZipTest would recommend command line parameter "K" for use with PC-Zipper. Use of a higher parameter will not significantly increase your system speed and might cause errors if you have weak or defective memory chips. If the use of ZipTest results in a system error before reaching completion, you probably have at least one defective memory chip. In case of this type of error, make note of the maximum speed reached and use PC-Zipper with a command line parameter several levels lower. ZIP.EXE can be used as a tool to allow use of a computer with a defective memory chip until a new chip or chips can be purchased. Use command line parameters X, Y, or Z to acheive satisfactory temporary operation. PC-Zipper and ZipTest are copyrighted programs of Lawrence Software.