HEWLETT-PACKARD'S INTELLIFONT-FOR-WINDOWS 3.1
                    DISK PREPARATION INSTRUCTIONS


    Notice:
    The information in this file is subject to change without notice.

    HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
    MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Hewlett-Packard
    shall not be liable for errors contained herein or for incidental or
    consequential damages in connection with the furnishing, performance,
    or use of this material.


    =====================================================================
    I.  Introduction
    =====================================================================

    This disk contains Part 1 of Hewlett-Packard's Intellifont-for-Windows
    3.1 (IFW 3.1), a combination screen/printer driver for printing in
    Windows 3.1 to an HP LaserJet III family printer.

    Intellifont-for-Windows 3.1 provides:

     - High quality screen fonts
     - On-the-fly screen font generation in the styles and sizes you want
       from within your Windows application.
     - Matching screen fonts for LJIII family printer internal scalable
       fonts as well as HP scalable typeface collections on cartridge or
       disk.

    Intellifont-for-Windows 3.1 System Requirements

     - HP LaserJet III family printer (III, IIID, IIIP, or IIISi)
     - IBM PC/AT or compatible (286 or above) running DOS 3.1 or higher
     - High density floppy drive (5.25" or 3.5")
     - Minimum 1 MB of extended memory, 2 MB is recommended
     - Minimum 2 MB hard disk space
     - Windows 3.1 -- Intellifont-for-Windows 3.1 is not supported in
       Windows 3.0.  For information on Intellifont-for-Windows 3.0,
       download IFW30.ANN from the LaserJet library (4).

    The file README.IFW included with the file IFW1.ZIP contains additional
    information about Intellifont-for-Windows 3.1.

    Please read both sections below before proceeding with installation.


    =====================================================================
    II. Contents
    =====================================================================

    Only a portion of the files required to install Intellifont-for-Windows
    3.1 are included here.  Once all of the files have been unarchived,
    they will occupy two high density diskettes.  The entire Intellifont-
    for-Windows 3.1 program is contained in the following three files:

             IFW1.ZIP   - Intellifont-for-Windows 3.1 Part 1
             IFW2.ZIP   - Intellifont-for-Windows 3.0/3.1 Part 2
             IFW3.ZIP   - Intellifont-for-Windows 3.0/3.1 Part 3

    Before you proceed with installation, you must download all three of
    the above files and follow the disk preparation instructions below.

    The Intellifont-for-Windows 3.1 files must be copied to two high
    density disks by running the batch file IFWDISK.BAT before the program
    can be installed.  The program is then installed from the disks created
    by IFWDISK.BAT.


    =====================================================================
    III. Disk Preparation
    =====================================================================

    The batch file IFWDISK.BAT will create two Intellifont-for-Windows 3.1
    program disks.  Once these disks have been created, you will install
    the progam from these disks.

    The Intellifont-for-Windows 3.1 installation program expects to find
    certain files in a specific directory format on the appropriate
    diskette. The batch file IFWDISK.BAT will create the proper
    subdirectorys on the diskettes and copy the appropriate files for you
    automatically.

    Before you begin you will need two blank high density, 5.25" or 3.5"
    formatted diskettes.

    To create the Intellifont-for-Windows 3.1 diskettes:

    1) Make a temporary subdirectory on your hard disk (ie C:\TEMP) and
       change to that directory.

    2) Copy the following archived files to the temporary subdirectory:
                          IFW1.ZIP
                          IFW2.ZIP
                          IFW3.ZIP

    3) Unarchive all of the files.

    4) Type IFWDISK and press <Enter>.  Follow the instructions on the
       screen.  You will be prompted to put the blank, formatted disks in
       Drive A:. The Intellifont-for-Windows 3.1 files will automatically
       be copied to these disks.

    5) Once the Intellifont-for-Windows 3.1 disks have been prepared,
       follow the installation instructions in the README.IFW file included
       with the file IFW1.ZIP.