|=========================================================================| | | | INTEL 2400 BAUD MODEM COMPATIBILITY WITH ADD-IN BOARDS | | | |=========================================================================| The following information tells whether or not a board is compatible with your Intel product. In some cases there are also special installation instructions. "(Field Report)" means the information came from our customers and may not have been verified by Intel's compatibility lab. DISK DRIVE BOARDS ----------------- IBM 360K EXTERNAL DISKETTE DRIVE Intel tested this product with the Intel 2400B Modem 2, and they are compatible. EMULATION BOARDS ---------------- DCA IRMA 2 Intel tested this product with the Intel 2400B Modem 2, and they are compatible. IBM 3270 CONNECTION Intel tested this product with the Intel 2400B Modem 2, and they are compatible. MEMORY BOARDS ------------- AST ADVANTAGE/2 Intel tested this product with the Intel 2400B Modem 2, and they are compatible. IBM 80286 EXP.MEM. Intel tested this product with the Intel 2400B Modem 2, and they are compatible. INTEL ABOVE BOARD All Classic Above Boards compatible with all Intel classic-bus and external modems. All Micro Channel Above Boards are compatible with intel Micro Channel and external modems. ========================================================================== 1/91 Intel FaxBack # 4322 Page 1 |=========================================================================| | | | INTEL 2400 BAUD MODEM COMPATIBILITY WITH ADD-IN BOARDS | | | |============================== (continued) ==============================| JRAM (Field report) One user reported that this board doesn't disable its serial port interrupts when its serial ports are turned off. This can cause system diagnostics programs to overlook a modem's serial port. This shouldn't affect the modem's operation with a standard communication program. MICE ---- IBM PS/2 MOUSE Intel tested this product with the Intel 2400B Modem 2, and they are compatible. MICROSOFT MOUSE Intel tested this product with the Intel 2400B Modem 2, and they are compatible. NETWORK BOARDS -------------- 3COM ETHERNET/ETHERNET II Intel tested this product, and it is compatible with Intel modems. If a modem is installed, make sure the interrupt level on the Ethernet board doesn't conflict with the serial port interrupt for the modem. Use INT 5 in an IBM PC AT-compatible computer; use INT 2 in an IBM PC XT-compatible computer. Follow these steps for Ethernet boards: 1. Move the INT jumper on the board to either 2 or 5. 2. Edit the command in the CONFIG.SYS file to read DEVICE=ETH.SYS X (where X= the interrupt level) For Ethernet II boards, edit the command in the CONFIG.SYS file to read DEVICE=ETH503.SYS /I:X (where X = the interrupt level). ========================================================================== 1/91 Intel FaxBack # 4322 Page 2 |=========================================================================| | | | INTEL 2400 BAUD MODEM COMPATIBILITY WITH ADD-IN BOARDS | | | |============================== (continued) ==============================| IBM TOKEN RING Intel tested this product with the Intel 2400B Modem 2, and they are compatible. Token Ring should also be compatible with all other Intel modems. VIDEO BOARDS ------------ COMPAQ VGA Intel tested this product, and it is compatible with Intel modems. HERCULES MONOCHROME Intel tested this product, and it is compatible with Intel modems. HERCULES GRAPHICS PLUS Intel tested this product, and it is compatible with Intel modems. IBM EGA Intel tested this product, and it is compatible with Intel modems. IBM VGA Intel tested this product, and it is compatible with Intel modems. PARADISE AUTOSWITCH EGA Intel tested this product, and it is compatible with Intel modems. OTHER BOARDS ------------ COPY II PC OPTION BOARD This board has four options for the I/O port address: 268, 3E8, 368, and 2E8. Address 268 (the CopyIIPC default address) conflicts with Above Boards, and 3E8 and 2E8 are the normal I/O ports for COM3 and COM4. Make sure you resolve any address conflicts when using a modem with this board. ========================================================================== 1/91 Intel FaxBack # 4322 Page 3 |=========================================================================| | | | INTEL 2400 BAUD MODEM COMPATIBILITY WITH ADD-IN BOARDS | | | |============================== (continued) ==============================| LOGITECH SCANMAN HAND SCANNER This board uses IRQ 3. If modem is configured for COM2 or COM4 (both use IRQ3) it may cause transmission problems. Reassign the IRQ on the SCANMAN a setting that won't conflict with the modem. SYSGEN BRIDGE-FILE Intel tested the 1050 and 1060 adapters (with utility disk version 2.3) with the Intel 2400B Modem 2, and they are compatible with Intel modems. ========================================================================== 1/91 Intel FaxBack # 4322 Page 4