			COMPARE
Compares two netlists and generates a report which  details the 
differences between the nets, and lists any parts which  were added or 
removed.  The netlists may be of different format.  

INPUT NETLISTS
Either:
1) Select the default input netlist filename by pressing <ENTER>.
2) Enter the desired input netlist filename at the blinking cursor 
   and press <ENTER>.
3) Enter a search pattern (example: *.net) and press <ENTER>.  Continue
   to step 4.
4) Use the up and down arrows to select the desired input netlist 
   filename and press <ENTER>.

INPUT TYPES
Either:
1) Select the default input format type by pressing <ENTER>.
2) Enter the desired input format type and press <ENTER>.
3) Use the up and down arrows to select the desired input format type, 
   then press <ENTER>.

OUTPUT REPORT
Either:
1) Select the default output report filename by pressing <ENTER>.
2) Enter the desired output report filename at the cursor and 
   press <ENTER>.

THRESHOLD
Either:
1) Select the default output format type by pressing <ENTER>.
2) Enter the desired output format type and press <ENTER>.

Note: The threshold must be an integer value between 1-100.  A lower
threshold tells the program to relax its standards as to what may be
a 'closest' net.  This will also somewhat increase execution time.
A threshold of 100 instructs the program to not to look for 'closest'
nets.  This will decrease execution time.

