==============================================================================
                     MAXTOR MODEL LXT-200A IDE DRIVE
==============================================================================

              Interface:  AT                   RLL 1,7 Encoding

Capacity, Unformatted                Capacity, Formatted AT Compatible

Per Drive (Mbytes)    :  234.00      Per Drive (Mbytes)    :  201.00
Per Surface (Mbytes)  :  33.40       Per Surface (Mbytes)  :  29.60
                                     Per Sector (Bytes)    :  512

Parameters                           Performance Specifications

Cylinders  :  Physical=1320          Transfer rate, Mbits/sec    :  10
           :  Logical=1314           Access Time (Average)       :  15msec
           :  Sectors/Track(6 Zones) Access Time (Track-To-Track):  3msec
           :  Zone 1=33              Access Time (Maximum)       :  30msec
           :  Zone 3=53              
Data Heads :  7
Pre-Comp   :  NONE

MTBF:  150,000 Hous (POH)             Dimensions(Inches): 1.625" x 4.0" x 5.750"

Power Requirements:  +12VDC +\- 5%. 0.6A Typical, 2.5A Maximum
                     + 5VDC +\- 5%. 1.7A Typical, .75A Maximum

NOTE:  This drive has been factory Low Level Formatted.  Using this drive to
       full capacity, you require a User Define Drive Type in your system
       CMOS.  The Translated parameters are 816 cylinders, 15 data heads,
       32 sectors, no pre-comp.  This formats out to 191 Mbytes.