Using SQZ! On A Network

LOTUS 1-2-3 RELEASE 2.x
SQZ! must be installed in the startup directory Ä where the "123" or "LOTUS" 
command is typed.  If you are in Lotus, you can usually determine the startup 
directory by typing / Add-In Attach.  The path shown on the screen is usually 
the startup directory.  At that point, the SQZ.ADN Add-In file should appear 
in the list of files.  SQZ! will not attach itself properly if you have to 
change to another directory to find the SQZ.ADN Add-In file.

Scenario 1:                  You start 1-2-3 from you personal subdirectory on 
the server.
Solution 1:                  Copy the SQZ.ADN Add-In file to your personal 
subdirectory on 
the server.

Scenario 2:                  You start 1-2-3 from a menu program.
Solution 2:                  Determine what subdirectory from which the menu 
executes the 
"123" command by typing / Add-In Attach.  Copy the SQZ.ADN Add-In file to that 
subdirectory.

Scenario 3:                  You start 1-2-3 from the Lotus 1-2-3 subdirectory 
on the server.
Solution 3:                  Copy the SQZ.ADN file to the Lotus 1-2-3 
subdirectory on the 
server.  By doing so, everyone can access SQZ! and squeezed files.  There is 
no copy or sharing protection of the SQZ.ADN Add-In file, but you should 
purchase one copy of the SQZ! package for each person that will be using SQZ! 
at the same time so that everyone will have a User's Manual.

LOTUS 1-2-3 RELEASE 3.1x
Installing SQZ! in 1-2-3 3.1x is much more flexible than in 1-2-3 2.x.  
Install the SQZ! files in any subdirectory, either on the server or on a local 
drive.  Then, in 1-2-3, customize SQZ! to load automatically from that drive 
and subdirectory.  Make sure all of the necessary SQZ! files are loaded in the 
same subdirectory.  Do NOT move the SQZ.PLC Add-In file or any other SQZ! file 
to a different subdirectory.

If you have any questions, please contact SQZ! Technical Support.


















SQZ! Application Note        Rev. 6/92           #7103     Page 1 of 1