{L A N t a s t i c {A2Mbps and E2Mbps MC Adapters} {Standard Bus and Micro Channel} LANtastic A2Mbps and E2Mbps MC adapters are the perfect way to economically network small or medium-sized businesses with IBM PC or Micro Channel compatible computers. Both Micro Channel Architecture and Industry Standard Architecture (ISA) adapters include a 10Mhz coprocessor, and 32K of on-board dual-ported RAM. Each 2Mbps adapter also includes software-selectable IRQ and RAMBASE address settings. Artisoft's implementation of the NetBIOS standard is loaded into and executed within the adapter. This plunges the NetBIOS draw on a PC's base RAM down to just 2K and off-loads network processing onto the adapter. The cards are easy to install and use inexpensive dual-twisted pair cable. LANtastic A2Mbps and E2Mbps MC adapters drive cable lengths of up to 1500 feet per network with Artisoft cable, up to 300 feet with AT&T telephone-grade cable, and will handle 32 nodes per segment. [{Specifications}] Hardware compatibility: Standard Bus (ISA): o IBM PC, XT, AT, PS/2 model 30, 286 and compatibles, and 386-based IBM PC bus compatibles o Approved for up to 33MHz 386, 20MHz 286 and 12MHz 8088 systems Micro Channel: o IBM PS/2 Micro Channel and compatibles PC requirements: o One floppy drive o One 16- or 8-bit slot o PC or MS DOS 3.1 or higher (3.2 not recommended). Interrupt Request Line (IRQ): o Standard Bus (ISA): 2, 3, 4, 5, 6, 7, and AT 10, 15 o Software selectable o Micro Channel: 3,4,5,6,7, and 9 Selectable I/O Base Address (ISA): o Selectable by on-board switches: 220h, 240h, 260h, 280h, 2A0h, 320h, 340h, 360h RAMBASE Address: o Standard Bus (ISA): Uses 32K above 640K boundary at selectable addresses: A000, A800, B000, C000, C800, D000, D800, and E000 (software selectable) o Micro Channel: Uses 32K at selectable addresses: 8000, 8800, 9000, 9800, A000, A800, B000, B800, C000, C800, D000, D800, E000, E800, F000, F800 Buffer RAM: o On-board 32K bytes of dual-ported buffer RAM Coprocessor: o On-board 10MHz Data transfer rate: o 2.0 Mbps Topology: o Bus topology o Star and tree configurations with optional Hub Network cable lengths: o Up to 1500 feet with Artisoft cable o Up to 1000 feet with Belden 9729 or Plenum 89729 o Up to 300 feet with AT&T telephone grade solid conductor, twisted pair wire (We do not support cables not listed above.) Network size: o Up to 32 computers without additional hardware o Up to 300 computers with optional Hub Connection method: o Rugged DB9 connectors, built-in "T" connector on each adapter o Optional DB9 to phone jack (RJ11) adapters Standards: o NetBIOS, EIA-489, EIA-422, SDLC Protocols: o CSMA/CD and CSMA/CA Power requirements o +5V 1400 mA maximum o +5V 900 mA typical Options: o Hub unit extends network beyond standard network lengths and creates star or tree topologies o DB9 to phone jack (RJ11) adapters o Remote boot ROM daughter board for ISA o Additional RAM daughter board for ISA that can reduce LANtastic NOS's RAM overhead in workstations to 0K and in servers to under 32K