Document 1199
CREATION OF A BOOTABLE DR DOS FLOPPY DISK
LS/JJ
3/19/92

Description:
            PROCEDURE TO CREATE A DR DOS 6 BOOTABLE DISK

The disk created by this procedure will allow access to a SuperStor'ed hard
disk as well as a secure one.

1. When booted from your hard disk, insert a blank floppy into drive A:
   Then type the following:-
                              FORMAT A: /S

   The floppy will be formatted and the operating systems files transferred.

2. When this is complete, you will need to copy some device drivers on to 
   the floppy too.

   Copy the following files from hard disk to floppy:-

   SSTORDRV.SYS
   DEVSWAP.COM             These 2 files are in the root directory.

   LOGIN.EXE
   LOGIN.TXT
   LOGIN.ERR               These 3 files are in the DRDOS directory.

3. You will then need to create a CONFIG.SYS file on the floppy.
   To use the DR DOS editor type in:-
                                       EDITOR A:CONFIG.SYS
   
   When asked if you want to create a new file, answer Y.
   Then type the following lines:-

   DEVICE=SSTORDRV.SYS
   DEVICE=DEVSWAP.COM
   INSTALL=LOGIN.EXE

   Then save the file by pressing CTRL KX.

   You should now be able to boot from this floppy disk.

   (NB. When prompted for a password, you must enter the MASTER password.)