FYI

(Note: The origin of this information may be internal or external
to Novell.  Novell makes every effort within its means to verify
this information.  However, the information provided in this
document is FOR YOUR INFORMATION only.  Novell makes no explicit or
implied claims to the validity of this information.)

          TITLE: Security/Fdisk/Installation
   DOCUMENT ID#: FYI-M-1108
           DATE: 30July92
        PRODUCT: DR DOS
PRODUCT VERSION: 6.0
     SUPERSEDES:

        SYMPTOM:     Unable to install on primary partition because
primary partition is too small.

ISSUE/PROBLEM        
If the primary partition is less than 2.5 MB DR DOS will not
install.  If Security is enabled during installation, Fdisk can not
correct this situation because of the secure disk and installation
will not complete, but security will be installed.


SOLUTION            
Boot from the initial installation floppies.  Press F10 to abort
and exit to DOS.  From the A: Prompt, Make drive C: bootable by:
SYS C:\. Copy the following files to drive C:

LOGIN.EXE
CONFIG.SYS
AUTOEXEC.BAT
SSTORDRV.SYS
DEVSWAP.COM
INSTALL.EXE
FDISK.COM

Rename C:\INSTALL.EXE to C:\SETUP.EXE.  Remove the floppy from
drive A: and reboot the computer.  Enter the Master password.  

At the C: prompt, type SETUP. Selecte only the SECURITY option. 
Enable SECURITY and enter a different password for the MASTER
PASSWORD and the USER PASSWORD.  Complete the installation and exit
to DOS.  Run SETUP again.  This time, disable SECURITY, complete
the installation and exit to DOS.  Now type FDISK and remove all
partitions on the hard drive.  Create a primary partition of at
least 3MB in size (recommend 10MB).  Reboot off intial installation
floppies and complete install.