What's New Fenimore's Macro Suite 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� Modified: ALT A. B, D, E, F, L, M, N, P, T, V, X,; CTRL D, G, L, Z; ADDR2ENV, ALTKEY, ASCII, BARCODE, CTRLKEY, CTRL INS/ENH INS, DP, ENH, FN, OPT, TABLE, TOC; NEW: ALT Tab, CTRL Home, SPRDSHET The following are the most recent changes: ALT A 8 Nov2 Modified to turn off reveal codes during execution and back on at the end of the macro. Made some minor menu changes. (Version 3.73) ALT B 13 Sep2 Added access to menu #4 for manual index entries. (Version 4.10) 2 Oct2 The menu #4 option mnemonic was changed from the letter "I" to the letter "X" for consistency with menu #2's access option for the same menu. (Version 4.10a) 5 Nov2 Added numerical/symbol access to all options. Numbers which used to access the other menus were converted to Function key options. (Version 4.2) ALTD 6 Nov2 When a requested directory doesn't exist, an error message is now displayed rather then the macro quitting without informing of a problem. (Version 3.90a) 12 Dec2 Hitting SETUP (Shift F1) now runs LISTSET (formerly ALTL) to switch between long and short document names. (Version 3.91) ALT E 20 Sep2 Partially rewrote to increase (slightly) speed and for easier support. Numerical menu items are no longer highlighted, alpha menu items are uppercase; non-menu items are lowercased. (Version 1.20) 2 Nov2 Changed the menu a little for clarity (1.20a) ALT F 21 Sep2 Hitting Shift F7 (Print) displays a prompt requesting the number of the document to print. If the number is out of range an error message is displayed and AutoRetrieve is reentered. If the document exists, it is printed and the normal document edit screen is reentered (this is because if a macro is running the print operation can't properly proceed - macros consume resources the print option needs to operate). Hitting ENTER or EXIT (F7) reenters the AutoRetrieve menu. This macro option allows only a single print operation per execution. Incompatible file formats won't be allowed print (WordPerfect cancels the print attempt). (Version 4.30) 7 Oct2 Made a minor menu change. Now when a file is saved a menu header appears above the file specification of the file being saved and the main menu disappears. (Version 4.30a) 14 Oct2 Change allows the deletion of all files from the AutoRetrieve file. Previously, when an attempt was made to remove all files or the only file within the AutoRetrieve file, the macro wouldn't allow it to happen - now it does. (Version 4.31) 18 Oct2 1. Added ability to enter the AutoRetrieve file while within a file. Access is via the "Retrieve: function (shift F10). All functions except retrieve a listed file are available (print a listed file or delete one or more file listing(s)). Hitting the ENTER, EXIT, or ESC key exits this AutoRetrieve file listing. 2. Added ability of macro to APPEND a blocked region to a file. When ALTF is executed with an active block, a menu is displayed with options to save or append the defined block to a file. (Version 4.40) 25 Oct2 Added file LOCK option (password). Enhanced WordPerfect function. Provides user option to immediately activate password/lock or remove password/lock via file save. NOTE: the WordPerfect manual refers to passwording a file as LOCKING A DOCUMENT (see LOCKED DOCUMENTS in the manual), whereas in their functional (TEXT IN/OUT) menu it's referred to as PASSWORD. (Version 4.5) 28 Oct2 The reveal codes wasn't always being restored upon completion of the macro. This was fixed. (Version 4.50a) 1 Nov2 Made changes which allow ALTB to rely upon the block SAVE/APPEND feature. (Version 4.51) 7 Nov2 Made a minor fix relating to filesaves. Seems that an intermittent problem occurred in which document names got switched/changed during filesaves somehow. Made minor improvements to the password enter/remove options. Added some numeric options to submenu's which didn't have them. (Version 4.51a) 21 Nov2 Fixed minor bug which prevented MASTER/SUBDOCUMENT condensing from properly working. (Version 4.51b) 22 Nov2 Added a display menu documenting the function keys available for use by ALTF. Added a master document tool menu for condensing or expanding master documents. It includes an option for directly entering the associated WordPerfect menu. (Version 4.60) ALT L 5 Nov2 Added function key access to SAVE option (F10) and LIST option (F5). (Version 2.10) 12 Dec2 Renamed LINESET. Called from ALTD Now. From now on ALTL performs LINE specific functions. See ALTT for more information. (No Version change) ALT M 17 Sep2 PAGE. The options which placed page numbering at the top or bottom of the page weren't working correctly and so, wouldn't place a page number location into the document. (Version 2.55a) 27 Sep2 CROSS-REFERENCES. If the letter option for Indexes was chosen in the list definition menu, the macro would fail (the numerical menu entry had no problem). The macro now recognizes the letter entry as well as the numerical entry. (Version 2.55c) 30 Sep2 PAGE. Selecting FOOTER A would select HEADER A instead. (Version 2.55d) 1 Oct2 PAGE. Minor improvement in menu handling. Added the option "SUPPRESS". This option enters the Wordperfect header/footer/page numbering suppress for the current page. (Version 2.56) 18 Oct2 Improved the CANCEL operation used during a cross-references update session so that the marker flag (used to relocate the cursor to its calling location at the conclusion of the update) is found and removed correctly. (Version 2.57) 19 Oct2 Added MARGINS option under PAGE option. (Version 2.57a) 23 Oct2 LINES/WINDOW. If reveal codes was on before the window option was executed, it wouldn't be restored at the conclusion of that option. This has been fixed. (Version 2.57b) 26 Oct2 TAB_SET. Removed TAB Set and placed in the macro ALT Tab. MARGINS. Moved main menu option MARGINS to a menu option under PAGE. Moved options 5 (PAGE) and 6 (Screen reset) to options 4 and 5 respectively. New options: 6-Table and 7- Column. Option 6 is essentially the same as hitting ALT F7 and chosing the Table option. If the cursor is within a table, the macro enters WordPerfect's table edit mode. If the cursor isn't within a table, the user is presented the option to create or edit a table. Option 7 is essentially the same as hitting ALT F7 and chosing the Column option. (Version 2.6) 28 Oct2 Made a few changes which allow ALTT (typeset macro) to use the LINE function. (Version 2.61) 29 Oct2 ALT M can now call ALT T directly using the TAB key. (Version 2.62) 30 Oct2 PAGE. Added force ODD or EVEN options to allow forcing a page as even or odd. LINE. Added WIDOW/ORPHAN protection and END_CENTERING. Widow/Orphan protection turns on/off widow/orphan protection. NOTE: 1) no protection code is entered into the document if the option chosen is already active. 2) no end_centering code is entered into the document if centering is not already active. (Version 2.63) 11 Nov2 COMMENTS. Conversion of a comment wasn't working (fixed). (Version 2.63b) 12 Nov2 COMMENTS. Blocked text may now be directly converted to a comment. Error handling improved for cases where a comment upon which to act does not exist. The option to convert a block of text to a comment does not appear unless a block is active. Empty blocks generate an error message. (Version 2.64) 14 Nov2 PAGE. Added NEW PAGE option under the page numbering option. This option restarts page numbering at the current page with page one. (Version 2.65) 6 Dec2 SPREADSHEET. NEW option. Relies on SPRDSHET.WPM for some simplification to working with spreadsheets. This option replaces the screen reset option (which is built into the ALTM exit routine anyway). (Version 2.70) 12 Dec2 Added a new menu option. PAGE DOWN enters a second menu which provides access to hyphenation functions (on or off at this time) and the ability to add a word to a dictionary. (Version 2.71) ALTN 16 Oct2 The option "K", menu #2 (large solid box) wasn't working. The menu option titles for boxes were changed; the single word "(SOLID)" replaced all occurrences of the word "fill" (they were removed entirely. Slight rearrangement of box options also took place. An additional math option was added. This is the triangular dots arrangment known as "therefore." (Version 3.00c) 24 Oct2 Minor change made to macro to attempt to avoid an intermittent problem. This problem manifests itself by dropping the option letter into the document rather than the character the option represents. (Version 3.00d) ALTP 24 Oct2 Fixed problem with block printing when generation of cross- references was required (printing failed). Rearranged macro code some. Made code international compatible (the underlying print operations use the number rather than mnemonical code). (Version 2.60a) 1 Nov2 If the answer to "print blocked region" is "YES" then a "printing" message is displayed. (Version 2.60b) 6 Nov2 Revamped the OPTIONS menu; the new OPTIONS menu now has the following new options: Select printer, binding, multiple copies generated by, initialize, set graphics quality, and set text quality. Additionally, the current WordPerfect print option settings are displayed. Changing these options is controlled via the macro with the exception of the selection of a printer. In this case, the WordPerfect select-printer option is entered and the user is dropped off there (and the macro exited). Finally, all menu items are now accessible by a numerical option as well as mnemonical. (Version 2.70) 8 Nov2 Added option to print Summary. Added information in print menu help for printing Summary as part of print range and printing Logical Odd or Logical Even pages. Logical pages do not depend on page numbering. (Version 2.71) 11 Nov2 Improved speed of screen rewrites for certain operations. Added printer tips for multiple copies menu. For those menus having only a single character option the ESC key now exits the macro completely and, typically, the EXIT key enters the main menu. Finally, the ENTER key moves to the previous menu. If an error of some sort occurs the error message will not occur more than twice. Previously, it was possible, under some rather unique circumstances, to create an infinite error loop in which the only possible exit was to reboot the computer. (Version 2.72) 22 Nov2 Added an option to count document sections from either the main print menu or the options menu. (Version 2.73) 30 Nov2 The option to print from a specific page to the end of the document or from the beginning of the document to a specific page wasn't working correctly. (Version 2.73a) ALTT 28 Oct2 Provided LINES option. This provides control over line spacing by specifying line height and/or the amount of additional space to add to wordwrap (a soft return/enter) and/or an enter (a hard return). This function is provided by accessing existing capabililites of ALTM (Misc Macro) LINE function. (Version 1.10) 29 Oct2 ALT T can now switch to ALT M directly using the TAB key. This is useful for when typeset functions were called but weren't really what was desired. (Version 1.10a) ALTV (VIEW) 3 Nov2 Major change. Switch (Shift F3) now switches between print previewing document screens. For instance, if you're print previewing document #1, Shift F3 switches to print previewing document #2. To change view colors, as is the normal WordPerfect function, hit �=� and then F3. Hitting List (F5) shows the current file's name for a few moments before returning to the normal screen. GOTO has been improved. The native WordPerfect GOTO prompt display removes the menu options, the document number and the page number. The macro GOTO prompt also removes the menu options, and document number but displays the current page in addition to the GOTO prompt. Exiting the macro is performed by CANCEL (F1), ESC, or EXIT (F7). If, for some reason, you aren't getting the options to work as desired it means WordPerfect jumped out of the macro. This is especially possible if you run help and hit the EXIT key during the course of going through help menus. To re-enter the macro enhanced print preview, just re-execute the macro. Additionally, the keyboard definition file no longer contains the print preview macro. The print preview macro, ALT V, now points to a named macro, VIEW. (Version 2.0) 4 Nov2 Added a time delay to the filename display. This time delay is over-ridden by hitting the ENTER key (the main menu print preview menu is then restored). (Version 2.00a) 15 Nov2 Added a GOTO GOTO function. The normal WordPerfect GOTO GOTO doesn't really exist. The function is provided by hitting CTRL END. The CTRL END feature is page oriented. This means that when a page preview is at the bottom of the page and a goto goto (CTRL END) is requested, the macro goes to the top of the requested page. If there is no location to return to, the normal "Go To" function is entered. (Version 2.00b) 20 Nov2 Made macro table aware. The macro now recognizes ALT HOME- left, right, up, and, down arrows; Go to-Home (home, home), left, right, up, and down; Go to-up, down, left, right arrows. The macro now has the capability to go to a particular cell. So, if the macro detects that it's within a table a different menu comes up asking about going to a table cell or document section. If an alpha character is detected the macro assumes you're going for a cell address and enters the address prompt. Hitting the ALT HOME or HOME arrow keys means you want to move around the table confines. Typing a number enters the document section prompt. NOTE: the method used to get the addresses (cell versus document) are different. This is reflected in the fact that if an alpha character is entered it isn't displayed (or otherwise recognized except as a flag as to the type of address desired); however, if a numeral is entered that number IS reflected as part of the address! (Version 1.10) 21 Nov2 When the cursor is in a table and GOTO is executed, as indicated in the 20 Nov entry, a menu is displayed asking for a cell address or page (or section:page). The user may use the menu entries indicated to enter that menu or begin typing the desired location. Hitting an alpha key assumes a table cell location, hitting a numeral assumes a page or Section:page; either menu grabs the letter/number hit at the menu (previous version treated the beginning of a cell address differently from the beginning a page/section:page). Hitting the ENTER key backs out of the menus (if an option hasn't been chosen). (Version 1.11) 29 Nov2 Added the capability to go to a particular page within a section. Since this capability isn't directly allowed while within a page preview, the macro exits to the document screen, moves to the desired section and page, and then reenters the page preview. The only disadvantage to this is that during the GOTO mode, entering a character makes the command line blink. This might be a tad disconcerting on the slower machines. (Version 2.10) ALTX 6 Oct2 Hitting ENTER the first time still removes any active help or exit options menus but hitting it the second time exits the macro. Made a change to the menuing so that if there are more than 25 horizontal screen lines the menus stay together. Now, rather than the options and help menus becoming progressively more separated from the main menu, they all stay together. (Version 5.30b) 5 Nov2 Changed the Exit options menu. The Legend is now on the left side of the screen, the options is now boxed in, and the options revised. When the AutoRetrieve is updated by the exit option the letter "A" is indicated; when it's not updated the letter "a" is indicated. Likewise, when a file save is indicated, "S" is used; no file save is indicated by an "s". (Version 5.4) ALT - (Para) 6 Nov2 Added alternate access to alphabetical options by providing character access. Minor programming changes related to flags and macro size reductions were made. Access to the WordPerfect functions are now provided by numerical access (international code rather than language specific). The macro was removed from the keyboard definition file. The macro accesses a standalone macro called PARA (short for paragraph). (Version 3.20) ALT Tab 26 Oct2 NEW. Enters the Tab Set menu. Same as Shift F8 1 (Line) 8 (Tab Set). (Version 1.0) CTRL D (Date) 6 Nov2 Changed macro's access to the WordPerfect functions to numerical (international). Added numerical entry to all menu's as an alternate menu access. (Version 3.20) 9 Nov2 Made some code improvements to better accomodate the addition of the numerical menu entries added to 6 Nov 92 change. (Version 3.20a) CTRL G (Graf) 4 Oct2 Removed highlighting from numerical menu options. Added mnemomical menu entries for manual border selections. Made all mnemonical menu selections uppercase, all other letters lowercase. (Version 1.11c) 28 Oct2 Editing options for a figure element would result in finding the cursor somewhere inside the border option changes menu. This was fixed. An "enhancement" was made in that when a request is made to change the options for a particular graphic element (box), the macro first locates that box and then enters the options menu for that box. When the macro is exited, the cursor rests on the code for the graphic element itself and immediately preceding the cursor is the newly created box options code. (Version 1.12) 31 Oct2 Minor menuing change to help user identify wanting to change graphic box options. If the user requests "0" (or any non- valid graphic box "number" for that matter) or if the graphic number is �None�, the macro drops the created options code at the current cursor location. Otherwise, the macro attempts to find the graphic number. For edit requests, if the graphic can't be found an error message is displayed and the main menu is then reentered. Likewise for box options, if an error message is displayed and then the box options are entered. Since no box was found, the macro treats the requested box as �0� (�None�) and drops the resulting options code accordingly. (Version 1.12a) 17 Nov2 Some menu's weren't returning to the next level correctly when ENTER was hit without choosing an option. This was fixed. Removed some redundant code. Option #8 (Shadow) of the border options has the same mnemonic as the single line border option. This option was therefore changed to �H�. (Version 1.12b) 31 Oct2 Minor menuing change to help user identify wanting to change graphic box options. If the user requests "0" (or any non- valid graphic box "number" for that matter) or if the graphic number is �None�, the macro drops the created options code at the current cursor location. Otherwise, the macro attempts to find the graphic number. For edit requests, if the graphic can't be found an error message is displayed and the main menu is then reentered. Likewise for box options, if an error message is displayed and then the box options are entered. Since no box was found, the macro treats the requested box as "0" ("None") and drops the resulting options code accordingly. (Version 1.12a) CTRL L (LtrHead) 6 Dec2 The macro had a problem cleaning up after itself if the user CANCELED. This has been remedied with this update. Hitting CANCEL or ESC at the date prompt removes the letterhead information entered to that point. Hitting EXIT at the date prompt acts exactly the same as choosing "NO." (Version 1.30) CTRL Z (BLNKSCRN) 14 Oct2 Macro now turns off reveal codes if it's active and restores it upon exit. (Version 1.02) 13 Dec2 Both screens are now erased while the macro is on. This is done in case of a split screen. Also, hitting the �=� key turns on a message display �scroll� effect (Version 1.02a) Shift Enh Right Arrow (NextSent) 26 Nov2 Completely rewritten to increase the speed at the size of a block is increased (blocking from left to right) or decreased (blocking is from right to left). Slower machines should notice a nearly order of magnitude increase in speed (if used at all). For instance, on a 12 MHz AT, what took over a minute to block now takes only about 7 seconds. (Version 3.00) 28 Nov2 At the end of a move block end action and the cursor ends up at the same location it started from, the cursor is now moved to the next sentence. This routine only occurs when right to left blocking was used and the cursor, during a move, attempts to move into a situation where blocking now becomes left to right. (Version 3.00a) Shift Enh Left Arrow (PrevSent) 26 Nov2 Completely rewritten to increase the speed at the size of a block is increased (blocking from right to left) or decreased (blocking is from left to right). Slower machines should notice a nearly order of magnitude increase in speed (if used at all). For instance, on a 12 MHz AT, what took over a minute to block now takes only about 7 seconds. (Version 3.00) CTRL Home (GO To) 14 Nov2 NEW. Enhanced version of WordPerfect's "Go to" command. This version allows going to any page within a section much like the print command allows printing of a page within a given section. The format is the same as for the print command: section #:page number. If no colon (":") is provided then the macro goes to the specified page. If a section number is requested without a page number, that number is converted to a page number. (Version 1.00) 15 Nov2 Tweaked the GOTO GOTO (return to last position) a little bit. (Version 1.00a) 20 Nov2 Made macro table aware. The macro now recognizes ALT HOME- left, right, up, and, down arrows; Go to-Home (home, home), left, right, up, and down; Go to-up, down, left, right arrows. The macro now has the capability to go to a particular cell. So, if the macro detects that it's within a table a different menu comes up asking about going to a table cell or document section. If an alpha character is detected the macro assumes you're going for a cell address and enters the address prompt. Hitting the ALT HOME or HOME arrow keys means you want to move around the table confines. Typing a number enters the document section prompt. NOTE: the method used to get the addresses (cell versus document) are different. This is reflected in the fact that if an alpha character is entered it isn't displayed (or otherwise recognized except as a flag as to the type of address desired); however, if a numeral is entered that number IS reflected as part of the address! (Version 1.10) 21 Nov2 When the cursor is in a table and GOTO is executed, as indicated in the 20 Nov entry, a menu is displayed asking for a cell address or page (or section:page). The user may use the menu entries indicated to enter that menu or begin typing the desired location. Hitting an alpha key assumes a table cell location, hitting a numeral assumes a page or Section:page; either menu grabs the letter/number hit at the menu (previous version treated the beginning of a cell address differently from the beginning a page/section:page). Hitting the ENTER key backs out of the menus (if an option isn't chosen). (Version 1.11) 10 Dec2 Made table aware. GOTO GOTO (CTRL Home CTRL Home) returns to a previous cursor location within the table (whether in table edit mode or not) (Version 1.12) 12 Dec2 If in other than the main editing structure, GOTO can go to a specified character. If in the main editing screen, going to a specified character was added to the features provided. Hit �=� at the GOTO prompt. This enters a menu which requests a character to go to. (Version 1.13) CTRL ENH DEL (CUT) 20 Nov2 If blocking is off, the macro now senses if the cursor is within a table. If so, a menu is displayed with the options to delete the table row (in which the cursor rests) or the current word. CANCEL, EXIT, ENTER, or ESC exit from the macro. (Version 2.20) 21 Nov2 Trying to block a region within a table cell which has no text seemed to leave the macro in limbo. This was fixed. (Version 2.20a) CTRL Ins/Enh Ins (PASTE) 21 Nov2 Senses if within a table. If so, a menu is displayed asking to insert a row or to paste text. Choosing the option performs the associated task immediately. (Version 1.20) ADDR2ENV 2 Nov2 Fixed a problem which occurred when an improper end of block was found. The result now is better error handling than before. (Addr2Env - Version 1.31; AddrSet - 1.10) ALTKEY 4 Nov2 Updated/modified information for ALT B, M, N, P, V, Addr2Env, Barcode. Added ALT TAB (tab set macro). (Version 2.32.2) 14 Nov2 Broke macro into three parts to keep a manageable size for use in computers with relatively minimal memory. (Version 2.32.4) ASCII 5 Nov2 Added numbers as alternate menu options. (Version 2.20) BARCODE 22 Oct2 If the character immediately following the last number of the zipcode is a table cell boundary or the end of a column, the macro wouldn't terminate normally (nor would it necessaryly do it's job correctly, especially if within a table!). It should now work as intended. (Version 1.41) 1 Nov2 An improper test resulted in the zipcode, when found, not being displayed. (Version 1.41a) 2 Nov2 The tab being entered to position the barcode was being entered into the document incorrectly during an address-to- envelope-move-with-barcode procedure was being performed. This resulted in the barcode being entered prior to the tab. (Version 1.42) 7 Nov2 Encountered a problem with generating zipcode barcode when within a table - resolved (the barcode was incomplete and incorrect). (Version 1.42a) CTRLKEY 4 Nov2 Added screen blanking macro, ALT Z (Version 2.31.1) DP 18 Oct2 Added ability of ALTF display AutoRetrieve file while within a file. See ALTF, 18 Oct 92 for further information. (Version 1.06) 25 Oct2 Added LOCK option to ALTF menu and options, and the OPERATIONS section. (Version 1.10) 5 Nov2 Added numerical options to menu's for ALTD and ALTF. Numerical entry for access to the WordPerfect directory was changed to a character. (Version 1.20) 22 Nov2 Added support for the SAVE macro's (ALTF) master document menu. (Version 1.20a) ENH 1 Nov2 Removed some code used by OPT for saving blocks of text. (Version 1.02c) 5 Nov2 Added numerical/symbol access to all options. Numbers which used to access the other menus were converted to Function key options. (Version 4.20) FN 6 Oct2 Modified the placement of the help menu to allow better placement in screens with more than 25 horizontal lines. (Version 1.52b) OPT 13 Sep2 Removed some unused code. Fixed a bug which occurred during quoting at the end of a document. BLOCK PROTECT option added. If blocking is inactive an error message is displayed and menu #2 is reentered. (Version 1.00c) 2 Oct2 The subscript/superscript menu now enters the previous menu level if the ENTER key is hit instead of an option. (Version 1.01) 7 Oct2 The copy/move message is now removed if the operation is cancelled. (Version 1.01a) 1 Nov2 The SAVE block option was improved to relie upon the SAVE/APPEND block feature of ALTF. (Version 1.10) 5 Nov2 Added numerical/symbol access to all options. Numbers which used to access the other menus were converted to Function key options. The additional option to access SAVE is F10, for Del it's the DEL key. (Version 1.20) 7 Nov2 Fixed a minor bug relating to saving a block of text. (Version 4.20a) 29 Nov2 Once a block has been defined, the ALT UP and DOWN arrow keys move up/down one line (these keys replace the Up and Down arrow keys. These keys, which used to do this job, now are alternate menu choices to the uppercase/lowercase options). Additionally, CTRL UP and CTRL DOWN arrow keys are now recognized and move UP/DOWN a paragraph (block must be active). (Version 1.20c) 12 Dec2 Added option to add a word to the dictionary. Blocking action must be word or no blocking action at all to work. This function works on a single word only. (Version 1.21) SPRDSHET 6 Dec2 Performs spreadsheet related functions. This macro basically duplicates the WordPerfect functions but creates ease of use not available in the non-macro version functions. This macro, which is callable as a standalone, is called from the MISCELLANEOUS macro (ALTM) as a menu option. (Version 1.0) TABLE 14 Oct2 Made minor improvement to blocking entire table. Previous method wouldn't block entire table under certain rare circumstances. (Version 1.40a) 15 Oct2 When blocking table, column, or row by menu option and then hitting the ENTER key (to return to menu #1), the macro wouldn't turn blocking off (as desired). This was fixed. (Version 1.40b) 9 Nov2 Placed numerical/character options in menus which didn't have them (i.e., had mnemonical choice(s) only). SPLIT and JOIN now are menu driven options under macro control rather than dropping into WordPerfect's table edit mode. Access to menu 1 from menu 2 and from menu 2 to menu 1 was provided numerically but has been switched to Function key access (F1=menu #1, F2=menu #2). (Version 1.50) 11 Nov2 Added the ability to change the decimal places assigned to a column. (Version 1.51) 19 Nov2 Added the ability to hit CTRL Down Arrow to quickly move the cursor to the last row of the current column. Improved the speed at which the column function blocked a column. Added a GOTO option. You specify the table address in terms of row and column just as in the standard WordPerfect table edit GOTO (for instance, to go to cell D43, hit CTRL Home, type �D43� and hit the ENTER key). Works with or without an active block. (There's still no GOTO GOTO as provided in standard WordPerfect). (Version 1.52) 27 Nov2 Made some minor changes in the way certain operations work. Copying, moving, or deleting a block no longer exits the macro upon completion of its task. Also, there are times when exiting to the first menu (blocking options) confuses the macro as to the blocking status. If this is the case (at the main menu), hit "?". This resets the status of the blocking variable and turns blocking off. Use this function with care since you can confuse the macro by resetting the blocking variable and activating the blocking. (Version 1.52b) 10 Dec2 Added a GOTO GOTO (CTRL Home CTRL Home) function. (Version 1.53) TOC 5 Nov2 Added numerical/symbol access to all options. Numbers which used to access the other menus were converted to Function key options. (Version 1.20) 9 Nov2 TOC main menu is now at the same height as the MAIN, ENHANCEMENTS, and OPTIONS menus (when transferring between each). (Version 1.21) ------------------------