ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.00 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: ID check every 50'th call. (configurable) 2: ID check when Security Violations exceed 10 in integers. (configurable) 3: ID check when Password Failures exceed 5 in integers. (configurable) 4: The above tests totaly independent of each other! 5: ID check when Connect Speed is not the normal one usually used. 6: Retry attempts to answer ID questions. (configurable) 7: New Security level wich the user should be "punished" to if not succesfull answering the ID (configurable) 8: If a user fails once in answering the ID check question, he is forced secretly to select a new password the next time he logs on your system. 9: Special SysOp security check if you call the system via modem at every time. Bypassed if on locally. 10: 20 Usernames to BYPASS the SmartSec. (configurable) 11: 20 Usernames to FORCE into the SmartSec. (configurable) 12: Language specific prompts and menus. (configurable) 13: Message sent to SysOp incase of user fails. (configurable) 14: SmartSec's new data is stored presently in NOTES field line 5. 15: Can be installed in any path anywhere together with menus/prompts. 16: Makes a self-check to see if required (PSA) and config files are ok. 17: All files are opened in "Read-Only" + "Deny Write" mode for full network compability. 18: All the Beta testing / development is dune in our 11 node Lantastic LAN environment for as good results as possible :-) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.01 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: If a Language specific prompt or menu is missing, the default being used is English. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.02 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Lantastic & Novell Broadcast messages of ID failures, Punished users and WhoCalled logons. (configurable) 2: Usernames in WHOCALL.USR to notify SysOp upon login. (configurable) 3: Time START & STOP limits for the Network Broadcasts. (configurable) (Please only use Military Time in 24hr format - no AM or PM support) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.03 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: HighSec ID check every XX'th call. Used to rise the level of normal security checks made to a higher value - at nights or at any other time you might expect "suspicious" users logon. (configurable) 2: The HighSec START & STOP times of increased ID checks. (configurable) 3: ID check when Conference Violations exceeds 3 in int. (configurable) 4: ID check when Download Limits exceeds 10 in integers. (configurable) 5: ID check when Upload Verify Failed exceeds 2 in int. (configurable) 6: Increased data-fileds in Notes Line 5 to keep the variables. We will soon be using our own external indexed database for this information. 7: Cleaned up the Code a bit of unecessary spaces & comments. In the near future we will leave the PPLC and instead start using MSC 7.0 and the PCBoard Developers Kit + our external indexed database to make things faster & better. Next release will take a while until finished... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.04 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: 50 Users can now be in any of the BYPASS/FORCE/WHOCALL userfiles. 2: Some SysOp's didn't realize that the VERIFICATION field needed to be empty to get SmartSec into the newuser mode. This version writes over the previous (if any) info in this field with the new selected ID. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.05 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Bug-Fix of the routine to update the datafield. This version works as it should. If you use v2.03 or 2.04 - change to this one... ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.06 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: TimeLog to keep the Users last 19 times logged on stored in our time variables at Notes Line 5, to check if the behavior is changed or within the normal values. No test is made of these new added fields until the 19'th and last variable is fully stored. Updated at every login to get the latest values to compare with. By using letters we have decresed the space needed and can store more logon times. SysOp (if local) is always bypassed the TimeLog test. Both Military or AM/PM time can be used at the PC. PCBoard converts it to HH:MM:SS wich we use. If any problem - please write a message to me at Salt Air or send a FidoNet Netmail / InterNet E-mail. For example: Starting with 00:00 - 00:59 = A, 01:00 - 01:59 = B, and so on... If using Military time, between 16:00 - 16:59 should be stored in Notes Line 5 as Q|. Or: 4 PM to 4.59 PM is also Q|. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.07 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Some PC's time variables behaved strange, so now SmartSec uses seconds after midnight to calculate the time needed for TimeLog. If you didn't get v2.06 to work, try this version. If all works OK, everytime you login the rightmost datafield in Notes Line 5, should always be updated with a letter corresponding to the time you're on. 2: In SMART.CFG at the fields for START/STOP of HighSec & the Broadcasts, if you cannot get it to work with the time specified as 00:00 - 01:00 please try 00.00 - 01.00 or whatever your machine uses for time format. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.08 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Added 2 fields in the SMART.CFG file for LOWSEC & HIGHSEC to bypass SmartSec on certain Security Levels. Usually this is simple to do using Security Specific Menus, but some SysOp's who doesn't use this can now easily select wich levels to check or not. If a level is bypassed, you can force a User into SmartSec by putting he's name in the BYPASS.USR file even if he belongs to a LOWSEC & HIGHSEC exception. Note: You *must* add line 17 & 18 in SMART.CFG with either LOWSEC & HIGHSEC # or NONE as desired. Have a look in the supplied one... 2: LOWSEC & HIGSEC Users Datafield in Notes Line 5 are always updated in case you change your mind and want them verified bu SmartSec later on. 3: Bug-Fix wich could make the DataField displaying something like: 0|0|0|0|0|||||||||||||||||||| If such a field is discovered, it's fixed and updated correctly to the last entry. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.09 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Found out that if a user failed the stated nr of times to answer the required ID, and after answering wrong the last time, he could bypass the "punishment" down to the lower security level by hanging up quickly. Now the Carrier Detect is disabled in SmartSec for a few seconds to make sure this "punishment" is dune correctly before (if carrier lost) the reloading of PCBoard starts. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.10 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Added Line 19 in SMART.CFG for predefined # of NUMBERS, CHARACTERS or MIXED with minimum input lenght from the user. This means using default 4 in this field, a user can enter any number between 4 and 25. As more combinations - as better. Maximum input lenght is 25. 2: Select the ID being a NUMBER, CHARACTER or MIXED with predefined minimum lenght. In case you change from the old "default" 4 numbers to say 6 characters, all users who doesn't have it must answer the newuser ID question again. Look at SMART.CFG Line 20. Note: Default is still 4 NUMBERS as ID. Don't forget to rewrite menus & prompts if changing... Note: If you have used 4 numbers and changes to 6 mixed, this means all users NOT having these 6 mixed symbols of characters/numbers has to answer a new ID string. This is working just fine... The problem comes if you want to get back to 4 numbers again. Then you must manually clear all users ID field. So simply - if you wanna change, keep it this way :-) 3: Added Extended Ascii support via the SMART.CFG file line 21. Originaly we use English characters but a foreign language can here in this field state their local characters. Default NUMBERS: " -/0123456789" Default CHARACTERS: " -ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" Default MIXED: " -/0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" Line 21 Extended HighAscii Swedish: "†„”Ž™" Note: This version of SmartSec is *NOT* CaseSensitive on input from the user. I personally think it's too much trouble with this so we convert everything to UpperCase when comparing the strings for safety. 4: When a user makes the input (NUMBERS, CHARACTERS or MIXED) SmartSec compares it with several userfields to assure he doesn't use he's name or any previous password or like that. We compare PWD, PWDHISTORY, ZIP, USERNAME, CITY, STATE, COUNTRY, HOME & DATA PHONE, STREET 1 & 2 among others. This way (hopefully) the user will be forced to select a good set of ID numbers or characters. :-) 5: TRASHCAN.ID file for non-accepted NUMBERS, CHARACTERS or MIXED as the input ID. Can hold 100 lines maximum with Non-Case Sensitive strings. 6: PCBoard not giving back memory from the PPE. At my system I have 141Kb RAM free when PCBoard is loaded. When SmartSec is runned, it decreses to 88Kb, and after exit back to PCBoard it's still 88Kb and *not* 141Kb as it should. I have asked David Terry about this but he couldn't find out what was wrong. So to "free" the "stolen" memory by SmartSec I've made a "dummy" program (half of SmartSec just being used) to be runned directly *after* the PPE like below: !C:\PCB\PPE\SMART\SMART.PPE !C:\PCB\PPE\SMART\FREEMEM.PPE This is for now the only solution at my system to free up the memory the way PCBoard should do it. Use FREEMEM if you need it... It gives back almost every kb of memory. At least better than nothing :-) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.11 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Bug-fix of Swap Failure Code: 3 This happends when I used a Shell when calling the Lantastic or Novell NET SEND command. Changed it back to as it was before. A little bit slower but no failure. Below is how it looks at my system: ************************************************************** 10-04-93 (12:00) (2) TED ZETTERGREN (14400E) (G) NYLAND Caller Number: 85 310 Caller Security: 103 Invalid ID number entered (446916) Swap Failure Code: 3 Invalid ID number entered (446916) Invalid ID number entered (131144) Message Left: Main Menu # 4975 Invalid ID number entered (691644) To many Invalid ID number attempts, Automatic Disconnect Minutes Used: 5 10-04-93 (12:05) (2) TED ZETTERGREN Off Abnormally ************************************************************** ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.12 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Fixed so if a user simply presses when asked for ID, he will no longer be punished down to the lower SecLevel as before. Simply logged of... This goes if he *only* presses and nothing more. If he starts with a and continue with the wrong input, he will be punished down as earlier. 2: In earlier versions of SmartSec IF a user failed even only one time to answer the required ID, he was by the program the next day he logged on forced to change he's normal password. This is now changed so SmartSec now accepts 2 failed attempts before forcing the password change next time. 3: Cleaned up the code a bit and removed all "ID number" and replaced it with "ID strings" so you using CHARACTERS or MIXED have the proper thing displayed. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.13 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Added logging of the users selected ID string if failed. 2: Added logging of the users accepted ID string. Configurable in SMART.CFG Line 22 to YES/NO if you don't want it dispalyed. 3: Better logging of errors if SmartSec is not configured okay. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.14 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: SmartSec now displays (UNREGISTERED) when not registered, but are not in any way crippled. In future versions when we convert more over to MSC7.0, we might make some features avalable only to our registered customers. If you want to register please have a look in the supplied file REGISTER.TXT ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.15 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Failure from my side :-) The v2.14 was never updated (the PPE file), but still the old v2.13... So here is v2.15 wich has some minor fixes + a new version of the smartreg.exe program. 2: Added logging of Newusers in SmartSec for the first time. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.16 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: CLS on the screen after executing SMARTREG.EXE instead of SAVESCRN. 2: Added 1 extra field at Notes 5 to see if a user hangs-up when verifying. Before, if checked at the stated intervals, a user could simply press enter and continue to do so until SmartSec disconnected him. Then the next time (when it wasn't say the 50'th call - but 51'th) he could escape the verification. Now we use this extra field to set a "0" if all is okay, but "1" if the verification process has started. So IF he hangs up - the "1" is still there and the next time he logs on SmartSec forces him to verify again. This field is only cleared with a "0" if a verification is successful and finished nicely. This "work-around" has to be made because PCBoard & PPLC does not permit manipulation to change the u_logons() parameter, the same with the Statistic PSA or Password History. Hope PPLC in future versions permits the same options as when running PCBSM manually... Note: When updating - change also the FREEMEM.PPE to the new version and be sure the SMART.CFG file has the same number of lines as this one supplied. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±± WHATSNEW V2.17 ±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±± RELEASE DATE: 931225 ±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1: Minor update only. Added a Evaluation Period of 90 days for the (UNREGISTERED) Shareware version. 2: 2 versions supplied with SMART. The SMART_1.PPE is using PPLC v1.00 for sysops still using PCBoard v15.0 SMART_2.PPE is using PPLC v2.00 for PCBoard v15.1 beta and the coming release. Rename the file you want to use to SMART.PPE 3: About the FREEMEM.PPE - now when Im using PCBoard v15.1 beta (at our BBS) most of the memory is released without using this "work around". Test it at your system if it's really necessary to keep using it. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ