Copyright: Build 2.01.00 941021 MIKETU


Microsoft Access 2.0 Error Codes
Error Codes (Numeric order)

  Show Error Messages

0-  100	2000-2099	3000-3099
	2100-2199	3100-3199
200-  299	2200-2299	3200-3299
	2300-2399	3300-3399
	2400-2499	3400-3499
	2500-2599
	2600-2699
	2700-2799		7700-7799
	2800-2899		7800-7899
			7900-7999
1-99

3	Return without GoSub
5	Illegal function call
6	Overflow
7	Out of memory
9	Subscript out of range
10	Duplicate definition
11	Division by zero
13	Type mismatch
14	Out of string space
16	String formula too complex
17	Can't continue
19	No Resume
20	Resume without error
28	Out of stack space
35	Sub or Function not defined
48	Error in loading DLL
49	Bad DLL calling convention
51	Internal error
52	Bad file name or number
53	File not found
54	Bad file mode
55	File already open
57	Device I/O error
58	File already exists
59	Bad record length
61	Disk full
62	Input past end of file
63	Bad record number
64	Bad file name
67	Too many files
68	Device unavailable
70	Permission denied
71	Disk not ready
74	Can't rename with different drive
75	Path/File access error
76	Path not found
90	Compile error
91	Object variable not Set
92	For loop not initialized
93	Invalid pattern string
94	Invalid use of Null
95	Cannot destroy active form instance
200-299

280	DDE channel not fully closed; awaiting response from the other application.
281	No more DDE channels are available.
282	Can't open DDE channel; Microsoft Access couldn't find the specified application and topic.
283	Can't open DDE channel; more than one application responded.
284	DDE channel is locked.
285	The other application won't perform the DDE method or operation you attempted.
286	Timeout while waiting for DDE response.
287	Operation terminated because Esc key was pressed before completion.
288	The other application is busy.
289	Data not provided when requested in DDE operation.
290	Data supplied in a DDE conversation is in the wrong format.
291	The other application quit.
292	DDE conversation closed or changed.
293	DDE method invoked with no channel open.
294	Invalid link format; can't create link to the other application.
295	Message queue filled; DDE message lost.
296	PasteLink already performed on this control.
297	Can't set LinkMode; invalid LinkTopic.
298	The DDE transaction failed.  Check to ensure you have the correct version of DDEML.DLL.
2000-2099

2000	Not enough memory to start Cue Cards.
2001	Operation cancelled.
2002	Not Yet Implemented.
2003	| Not Yet Implemented.
2004	Out of memory.
2005	Not enough memory to start Microsoft Access.
2006	Not a valid document name: '<docname>'.
2007	You already have an open document named '<docname>'; you must close it before you can save or rename another document under the same name.
2008	Document '<docname>' is open; you must close it before deleting it.
2009	Document '<docname>' is open; you must close it before renaming it.
2010	Document '<docname>' is open; you must close it before cutting it.
2011	Not a valid password.
2012	This copy of Microsoft Access has expired.  Please get a new copy from your Microsoft distributor.
2013	This copy of Microsoft Access hasn't been personalized properly.  Please reinstall using the provided Setup program.
2040	Incompatible version of 'WIN87EM.DLL'; Microsoft Access can't run.
2042	Can't start Microsoft Access. Please try again.
2043	Can't find file: '|'.  Please verify that the correct path and file name are given.
2044	Currently unable to quit Microsoft Access.
2045	An argument in the command line used to start Microsoft Access wasn't valid and was ignored.
2046	Command not available: |.
2047	Incompatible version of 'MSABC200.DLL'; Microsoft Access can't run.
2048	Not enough memory to open '|'.
2049	Name '|' contains invalid characters or is too long.
2050	OLE/DDE Timeout must be from 0 to 300 seconds.
2051	The new name, '|', is too long.  Microsoft Access object names can't exceed 64 characters.
2052	Not enough system resources to update display.
2053	Wildcard characters aren't allowed in file name.
2054	Can't change to directory; path too long.
2055	Expression not valid: '|'.
2056	Can't supply context-sensitive Help.
2057	Not enough stack memory left.
2058	Incompatible version of '|'; Microsoft Access can't run.
2059	The selected name is too long for Microsoft Access.
2060	Can't create a field list on an action query: '<query>'.
2061	Negative numbers aren't allowed.
2062	msacc20.ini is missing or isn't the correct version. Import/Export isn't available.
2063	Can't create, open, or write to index file '|'.
2064	Not a valid menu bar value: '|'.
2065	Not a valid name for a menu, command, or subcommand.
2066	A display driver resolution of at least 400 x 340 pixels is required to run Microsoft Access.
2067	The AddMenu action can be used only in a macro specified as the MenuBar property setting.
2068	Help isn't available for this item.
2069	The key combination '|1' in '|2' isn't valid and will be ignored.
2070	The key combination '|1' in '|2' is also assigned to another macro.  Only the first one will be used.
2071	Cue Cards couldn't be started because of an incomplete setup.
2072	Outdated '|' file.  Please reinstall Microsoft Access.
2073	Specification doesn't exist in this database or has no columns defined.
2074	There was an error while attempting to communicate with Cue Cards.
2075	The other application couldn't be found in any of the directories in your PATH.  Please check your AUTOEXEC.BAT file.
2076	The other application couldn't be started because the .EXE file isn't valid.
2077	This database currently has no import/export specifications.
2078	Help isn't available due to lack of available memory or improper installation of Windows or Microsoft Access.
2079	Entry Required!
2080	Microsoft Access is corrupted. Reinstall from the original disks.
2081	Specification has too many columns for that table.
2082	Specification column '<columnname>' doesn't match a table column.
2083	Database is read-only -- cannot create specification tables.
2084	Start and width must be greater than 0.
2085	ODBC Refresh Interval must be in the range of 1-3600 seconds.
2086	Some Add-In menu entries couldn't be loaded because too many were specified.
2087	Add-In menu expression '|' is too long and will be ignored.
2088	Add-In menu expression is empty and will be ignored.
2089	Can't display a submenu twice in the same menu hierarchy.
2090	An action within the current global menu's macro group can't change the global menu bar.
2091	Invalid name '|'.
2092	Invalid variant type for this option setting.
2093	Invalid option setting. Valid settings are 0 to |.
2094	Unknown toolbar  '|'.
2095	Can't switch to |.
2096	Can't load MSTOOLBR.DLL.
2097	Can't create import/export specification for a Microsoft Access database stored in an out-of-date format.
2100-2199

2100	Can't place item at this location.
2101	The setting you entered isn't valid for this property.
2102	There is no form named '|'.
2103	There is no report named '|'.
2104	You already have something named '|'.
2105	Can't go to specified record.
2106	| errors occurred while loading.
2107	The value you entered is prohibited by the validation rule set for this field.
2108	The GoToControl action can't be executed until the field being edited is saved.
2109	There is no control named '|'.
2110	Can't move to control |.
2111	Couldn't save the changes you made.  Click OK to try again, or click Cancel to undo your changes.
2112	Can't paste item.
2113	The value you entered isn't appropriate for this field.
2114	Invalid file format; can't load bitmap from file |.
2115	Field or record can't be saved while it's being validated.
2116	Can't restore field's previous value; choose Undo Current Record or Undo Current Field from the Edit menu.
2117	Text too long.
2118	The Requery action can't be executed until the field is saved.
2119	The Requery action can't be used on control <ctlname>.
2120	You must select an existing table or query to use a Form or Report Wizard.
2121	Can't open form |.
2122	Can't view a form as a continuous form if it contains a subform or an unbound OLE object.
2123	Not a valid control name.
2124	Not a valid form name.
2125	The setting for FontSize must be from 1 to 127.
2126	The setting for ColumnCount must be from 1 to 255.
2127	The setting for BoundColumn can't be greater than the number of columns set with the ColumnCount property.
2128	The setting for RowSourceType must be Table/Query, Value List, Field List, or the name of a valid Access Basic fill function.
2129	The setting for DefaultEditing must be Allow Edits, Read Only, Data Entry, or Can't Add Records.
2130	The setting for GridX or GridY must be from 1 to 64.
2131	An expression can't be longer than 2,048 characters.
2132	The setting for DecimalPlaces must be from 0 to 15.  You also can enter Auto (-1) for the default.
2133	A form can't be a subform within itself, and a report can't be a subreport within itself.
2134	The setting for Width must be from 0 to 22 inches (55.87 cm).
2135	Can't set this property; it's read-only.
2136	This property can be set only in Design view; it's read-only otherwise.
2137	Can't use Find or Replace for one of the following reasons: There are no fields to search; fields have no data; data in fields can't be searched.
2138	Can't search field because there was an error getting its value.
2139	Can't replace current value of field.
2140	Couldn't save field.  Please undo and then choose Find or Replace.
2141	No match to replace in current field.
2142	The FindRecord action requires a FindWhat argument.
2143	Search Criteria wasn't specified; use the FindRecord action or the Find command.
2144	The setting for ListRows must be from 1 to 255.
2145	ColumnWidths must be one or more values from 0 to 22 inches (55.87 cm), separated by ';' or the list separator.
2146	Couldn't save field.  Please undo and then choose the Allow Editing command.
2147	Controls can be created only in Design view.
2148	The section ID is invalid.
2149	The item type is invalid.
2150	This control can't contain other controls.
2151	This control can't contain that type of control.
2152	Group levels can be created only in reports.
2153	Maximum number of group levels exceeded.
2154	Can't execute this function with the Sorting and Grouping box open.
2155	Access Basic compile error.
2156	Access Basic compile error.  View error in context?
2157	The sum of the top and bottom margins and page header and footer heights is greater than the page length.
2158	Print and graphics methods and their associated properties can be used only while printing or previewing a report.
2159	Not enough memory to initialize print or graphics methods.
2160	An error occurred while initializing print or graphics methods.
2161	FindWhat argument contains an invalid expression.
2162	Can't search data using current FindRecord action arguments.
2163	Page number given as an argument for the GoToPage action is out of range.
2164	Can't disable the control that has the focus.
2165	Can't hide the control that has the focus.
2166	Can't lock the control that has the focus.
2167	Can't set this property; it's read-only.
2168	The setting for this property can be changed only with the Object/Change Link command on the Edit menu.
2169	The record being edited can't be saved.  If you close the form, the changes you've made to the record will be lost.  Close anyway?
2170	Can't retrieve data for the list box.
2171	Subforms can't be nested more than three deep.
2172	The crosstab query underlying a subform or subreport must have fixed column headings.
2173	Can't search in current field '<fieldname>'.
2174	Can't end browse mode from this form event.
2175	Out of memory during search.
2176	The setting for this property is too long.
2177	Reports may only be embedded in other reports, not in forms.
2178	Can't add section.  Doing so would exceed maximum combined section size limit.  You must shrink one of the existing sections first.
2179	Couldn't open Palette.
2180	Couldn't open toolbox.
2181	Can't perform a Quick Sort on a calculated field.
2182	Can't perform a Quick Sort on this field, or within a subform.
2183	Invalid setting for TimerInterval property; correct values are from 0 to 65,535 milliseconds.
2184	Invalid setting for TabIndex property; correct values are from 0 to |.
2185	This property is available only when the control has the focus.
2186	This property isn't available in Design view.
2187	This property is available only in Design view.
2188	Section width is greater than page width and there are no items in the additional space.  Some pages may be blank.
2189	Syntax error or missing Control Wizard.
2190	This property has been replaced by a new property; use the new property instead.
2191	Can't set property '|' after printing has started.
2192	Must be a device-independent bitmap (DIB).
2193	The left and right margins are wider than the page.
2194	Can't set PictureData property in Datasheet view.
2195	Not a valid section name.
2196	Can't obtain this property setting.  The property may not be available in this view, or an error may have occurred.
2197	Can't set the subform control's SourceObject property to Null while displaying the main form in Form view.
2200-2299

2200	Not a valid number.
2201	An error occurred while attempting to retrieve printer information for the |1 on |2
2202	There is no default printer.  Select or install one using the Windows Control Panel.
2203	COMMDLG.DLL failed: error code '0x|'.
2204	The 'device=|' entry in the WIN.INI file isn't valid.
2205	The default printer driver '|.DRV' wasn't found.  Reinstall using the Windows Control Panel.
2206	Not a valid page number.
2207	Can't print macros.
2208	The sum of the left and right margins is greater than the width of the selected paper size.
2209	The sum of the top and bottom margins is greater than the length of the selected paper size.
2210	Can't print or preview; page size larger than 22.75inches.
2220	Couldn't open file '|'.
2221	Text would be too long; change cancelled.
2222	This control is read-only and can't be modified.
2223	The file name '|' is too long.
2224	Name '|' contains invalid characters or is too long.
2225	Couldn't open the Clipboard.
2226	Can't paste.
2227	Data format error; can't paste.
2228	Can't load or save object.
2229	Can't start object application.
2231	Errors encountered during OLE operation.  The problem ID is '|'.
2234	Can't paste OLE object.
2237	The text you enter must match an entry in the list.
2239	'|' is corrupted or isn't a Microsoft Access database file.  To repair, clear the Read Only check box before opening the database, or use the Repair Database command.
2240	Unexpected data exchange error.
2241	The | object is corrupted and might not be displayed properly.
2243	Can't paste OLE object.
2244	An unrecoverable error occurred while reading the file '|'.
2245	Specified icon is corrupted.
2246	Can't run query; parameter values too large.
2260	An error occurred while sending data to the object application.
2262	This value must be a number.
2263	The number is too large.
2264	Not a recognized unit of measurement.
2265	Must specify a unit of measurement.
2266	'|' isn't a valid setting for RowSourceType property.
2267	Not enough disk space for printing.
2268	Not enough memory to load some library databases.
2269	Some library databases couldn't be loaded because too many were specified.
2270	Couldn't compile module in utility or library databases.
2271	[Libraries] section missing from msacc20.ini; Form and Report Wizards won't be available.
2272	The setting for the Update Retry Interval must be from 0 to 1,000 milliseconds.
2273	The setting for Update Retries must be from 0 to 10.
2274	The database '|' is already open as a library database.
2275	The string returned by the builder was too long.  Truncating result.
2276	The current window is not the window that invoked the builder. Builder failed.
2277	Error in font initialization.
2278	Can't save changes to this object because you don't have permission to write to the record.  Copy the object to the Clipboard if you want to save it, then choose Undo Field.
2279	The value you entered isn't appropriate for the input mask '<maskname>' specified for this field.  Press Esc to cancel your changes.
2280	Too many output formats.  Some will not be available.
2281	No output formats installed.
2282	Output format not available.
2283	Invalid format specification for '|'.
2284	Can't write to file.
2285	Can't create file.
2286	Can't close file.
2287	Can't open a mail session.
2288	Can't load the '|' format.
2289	Can't output module in the requested format.
2290	Too many message recipients.  Message not sent.
2291	Too many message attachments.  Message not sent.
2292	Message text is too long.  Message not sent.
2293	Can't send message.
2294	Can't attach object.  Message not sent.
2295	Unknown message recipient(s).  Message not sent.
2296	Logon failed.  Message not sent.
2297	Can't open mail session.
2298	Can't start Wizard, builder, or add-in.
2299	Can't open Zoom box.  File UTILITY.MDA is missing or has been modified.
2300-2399

2300	Too many control styles.
2301	Not enough system resources.
2302	Can't open file for writing.  Check that the file is not currently in use and that you have enough disk space on the destination drive.
2303	Can't output data.
2304	Can't write to file.  Make sure that you have enough disk space on your destination drive.
2305	Too many columns in output.
2306	Too many rows in output.
2307	No data to output.
2308	|1This file already exists.|2Replace existing file?
2309	Invalid add-in entry for '|'.
2310	Too many builder entries in the '|' section.
2311	Not enough memory to run NotInList event procedure.
2320	Can't display the field in which Total cell is 'Where'.  Turn off the Show option for that field.
2321	Can't set criteria unless you've specified a field.
2322	Can't sort on fields added to the QBE grid with the asterisk.
2323	Can't have a Criteria clause on fields added to the QBE grid with the asterisk.
2324	Can't show Totals on fields added to the QBE grid with the asterisk.
2325	A field name in the LinkMasterFields property is too long.
2326	Value field can't specify Group By in the Totals cell.  Specify a function.
2327	Column Heading field must specify Group By in the Totals cell.
2328	Can't run update queries for fields added to the QBE grid with the asterisk.
2329	Must specify one or more Row Heading(s), one Column Heading, and one Value.
2330	Can't represent join in Design view: '|'.
2331	Must specify at least one Row Heading as Group By.
2332	Can't match fields added to the QBE grid with the asterisk to a column or expression in an append query.
2333	Must specify destination table for query.
2334	'<queryname>' is an action query and can't be printed.
2335	LinkChildFields and LinkMasterFields property settings must have the same number of fields.
2337	Value field can't specify a Criteria clause.
2338	Expression is too long for the QBE grid and has been truncated: '|'.
2339	Can't create a temporary query.
2340	Expression is too long for the QBE grid.
2342	RunSQL action can only run action query SQL statements.
2343	The new alias is too long.  Aliases can't exceed 64 characters.
2344	Invalid Top Value expression. Please enter an integer value or percentage.
2345	Invalid Top Value expression. Please enter a percentage between 1% and 100%.
2346	Invalid Top Value expression. Please enter a number greater than zero.
2347	Invalid database filename.
2348	Can't set alias to a null value.
2349	Invalid Top Value expression. Please enter a smaller number.
2350	Can't save query of this type as SQL statement, or query contains a syntax error.  Please save query as a named query.
2351	Can't represent implicit VALUES clause in QBE grid.
2360	Missing field name.
2361	Table doesn't have any fields; can't save.
2362	Duplicate field name: '<fieldname>'.
2363	Only one Counter field is allowed per table.
2364	Can't open table in Datasheet view.
2366	Errors were encountered during save.  All changes were saved except the field ordering was not saved successfully.
2370	Removing or changing the index for this field would require removal of the primary key.
2371	Can't create primary key. Changes weren't saved.
2372	Not a valid field name.
2373	The setting for Field Size must be from 0 to 255.
2374	Can't create an index or primary key on more than 10 fields.
2375	Can't paste beyond end of table.
2376	Can't create primary key; too many fields.
2377	Can't change data type to Counter in a table with data.
2378	This table is read-only.  Use a different name in the Save As dialog box to save your changes.
2379	Can't create a primary key on a field of this data type.
2380	Can't create primary key; no fields selected.
2381	Can't create primary key; field doesn't have a name.
2382	Can't switch to Datasheet view and can't return to Design view.
2383	Couldn't change data type, because there either isn't enough disk space or enough memory.
2384	Can't change one field from the Counter type and add another Counter field at the same time.
2385	Errors were encountered during save.  |
2386	Errors were encountered during save.  The new table was not created.
2387	Can't delete table '<tablename>'.  It is participating in one or more relationships.
2388	Can't change primary key.  This table is the Primary Table in one or more relationships.
2389	Can't delete field '<fieldname>'.  It is part of one or more relationships.
2390	Can't change the data type or field size of this field.  It is part of one or more relationships.
2391	Couldn't append.  Field '<Field>' does not exist in destination table '<tablename>'.
2392	Can't set the Unique property of a primary key to No.
2393	Can't set the IgnoreNulls property of a primary key to Yes.
2394	Invalid index name.
2395	Can't have indexes without names.
2396	Can't create index or primary key because one or more field names are missing.
2397	Duplicate index name: '|'.
2398	Changes were made to the primary key.  This table is the primary table in one or more relationships.  Changes to the primary key won't be saved.
2400-2499

2400	No room to insert.
2420	Syntax error in number
2421	Syntax error in date
2422	Syntax error in string
2423	Invalid use of '.', '!', or '()'.
2424	Unknown name
2425	Unknown function name
2426	Function isn't available in expressions
2427	Object has no value
2428	Invalid arguments used with domain function
2429	In operator requires parentheses: ()
2430	Between operator without And
2431	Syntax error
2432	Syntax error
2433	Syntax error
2434	Syntax error
2435	Extra right parenthesis: )
2436	Missing ), ], or |
2437	Invalid use of vertical bars
2438	Syntax error
2439	Wrong number of arguments used with function
2440	IIF function requires parentheses: ()
2442	Invalid use of parentheses
2443	Invalid use of Is operator
2445	Expression too complex
2446	Out of memory during calculation
2447	Invalid use of '.', '!', or '()'.
2448	Can't set value.
2449	Invalid method in expression.
2450	Invalid reference to form '|'.
2451	Invalid reference to report '|'.
2452	Invalid reference to Parent property.
2453	Invalid reference to control '|'.
2454	Invalid reference to '!|'.
2455	Invalid reference to property '|'.
2456	Invalid form number reference.
2457	Invalid report number reference.
2458	Invalid control number reference.
2459	Can't refer to Parent property in Design view.
2460	Can't refer to RecordsetClone property in Design view.
2461	Invalid section reference.
2462	Invalid section number reference.
2463	Invalid group level reference.
2464	Invalid group level number reference.
2465	Invalid reference to field '<fieldname>'.
2466	Invalid reference to Dynaset property.
2467	Object referred to in expression no longer exists.
2468	Invalid argument used with DatePart, DateAdd or DateDiff function.
2469	|1 in validation rule: '|2'.
2470	| in validation rule.
2471	<> in query.
2472	<> in linked master field.
2473	|1 in '|2' expression.
2474	No control is active.
2475	No form is active.
2476	No report is active.
2477	Invalid subclass '|' referred to in TypeOf function.
2478	Can't use this method in the current view.
2479	Event procedure '|' can't be a function.
2480	Numeric reference to Property object is out of range.
2481	Can't set value while in print preview.
2482	Invalid reference to '|'.
2483	Can't move to previous control when no other control has had the focus.
2485	Macro '|' not found.
2486	Can't run this action while in current code context.
2487	Invalid object type.
2488	Action isn't available because current window isn't a form or report window.
2489	Object '|' isn't open.
2490	Options argument in Quit action isn't valid.
2491	Action isn't valid because the form or report isn't bound to a table or query.
2492	Can't find Macro Name '|2' in Macro Group '|1'.
2493	Action requires an Object Name argument.
2494	Action requires a Form Name argument.
2495	Action requires a Table Name argument.
2496	Action requires a Query Name argument.
2497	Action requires a Report Name argument.
2498	Argument type mismatch.
2499	Can't use GoToRecord action on an object in Design view.
2500-2599

2500	RepeatCount argument in RunMacro action can't be less than 0.
2501	Action | was cancelled.
2502	Action requires a Macro Name argument.
2503	Can't use this command with DoCmd.
2504	Action requires at least | argument(s).
2505	Not a valid value for argument '|'.
2506	Not a valid value for the Transfer Type argument.
2507	'|' isn't an installed database type.
2508	Not a valid value for the Spreadsheet Type argument.
2509	Range argument can't be longer than 255 characters.
2510	Specification Name argument can't be longer than 64 characters.
2511	A Specification Name is required for fixed-width import/export.
2512	Can't parse expression: '|'.
2513	Macro Name argument can't be longer than 64 characters.
2514	Action requires a Control Name argument.
2515	Can't open macro |.  This macro was saved using a different version of Microsoft Access.
2516	Module '|' not found.
2517	Procedure '|' not found.
2518	Action requires a Macro Name argument.
2519	SelectObject action requires an open database.
2520	Action requires a Module or Procedure Name argument.
2521	Procedure '|' not found in the specified module.
2522	Action requires a File Name argument.
2523	Invalid Show argument.
2540	File '|' is in use and can't be deleted.
2541	The contents of the Clipboard have been deleted and can't be pasted.
2542	Can't run macro from command line without specifying a database.
2543	Can't paste an object onto itself.  You must specify a different name.
2544	There is no |.
2545	You must specify a destination database or a new name in order to copy.
2546	Can't carry out | action because nothing is selected.
2547	File '|' can't be deleted.
2548	Can't copy '|' to itself.
2549	Couldn't delete '|1' after compacting it.  Compacted database is named '|2'
2550	Couldn't delete '|1' after encrypting it.  Encrypted database is named '|2'
2551	Couldn't delete '|1' after decrypting it.  Decrypted database is named '|2'
2552	Couldn't encrypt.  Only the owner of a database may encrypt it.
2553	Couldn't decrypt.  Only the owner of a database may decrypt it.
2554	Can't run application, missing command line arguments.
2555	Can't convert a database if the source and destination databases have the same name and path.
2556	Can't deliver an encrypted database.
2557	This database is already in the current database format.
2558	Can't convert this database.  You must have 'Modify Design' permissions on all tables.
2559	## attached tables could not be refreshed during conversion.
2580	This report is bound to a table or query that doesn't exist: '<tblqryname>'.
2581	You must specify a field or expression to sort on.
2582	GroupInterval can be set to zero only when GroupOn is set to Each Value.
2583	The ApplyFilter action can be called only from a macro run from the OnOpen property.
2584	You can't use aggregate functions in a page header or footer.
2585	Can't run this action while processing a form or report event.
2586	The MoveLayout and NextRecord run-time properties can't both be set to FALSE; to ensure that the report advances both have been set back to TRUE.
2587	Syntax error or missing report output function.
2600-2699

2600	Please verify the new password by entering it in the Verify box and pressing Enter.
2601	You don't have permission to read '|'.
2602	You don't have permission to modify '|'.
2603	You don't have permission to execute '|'.
2604	You can't view this object's permissions.
2605	Can't remove user from group '|'.
2606	Not a valid Microsoft Access object type.
2607	You don't have permission to cut '|'.
2608	You don't have permission to copy '|'.
2609	You don't have permission to delete '|'.
2610	You must enter a personal identifier (PID) consisting of at least four and no more than 20 characters and digits.
2612	Not a valid account name.
2613	You don't have permission to rename '|'.
2614	You don't have permission to read this form.
2615	You don't have permission to change the owner of '|'.
2616	You can't change permissions for '|'.
2617	You don't have permission to import or export '|'.
2646	Can't create relationship to enforce referential integrity.  Existing data in table '<tablename>' violates referential integrity rules.
2647	Table '<tablename>' has no primary key.  You can't select it as the related table in a one-to-one relationship.
2648	The relationship has been created as a one-to-one relationship because there is a unique index on the field(s) specified for the related table.
2649	Can't create relationship to enforce referential integrity.  The field(s) in the primary table must be the primary key or have a unique index.
2650	Can't create relationship to enforce referential integrity.  Matching fields must have the same data type.
2651	Can't create a relationship between fields with the Memo, OLE Object, or Yes/No data type.
2680	Maximum number of OLE objects already loaded.
2683	There is no object in this control.
2684	This field is empty.  Use Insert Object to create a new object.
2685	The data in this field is not recognized as an OLE object.
2686	Unable to save the | object.
2687	There was a problem reading the | object.
2690	A system resource necessary for drawing the | object was not available.
2691	Can't connect with object application.
2694	Clipboard operation failed.  It may be in use by another application or you may be low on memory.
2695	Unable to generate a presentation from the converted | object.
2696	Improperly formed OLE information.
2697	There was a problem loading the | object.
2698	There was a problem saving the | object
2699	A problem occurred while using the object application.
2700-2799

2700	The other application or a .DLL could not be found.  Verify that it is properly registered.
2701	The other application is already in use.
2702	The | object does not appear to be correctly registered.
2703	A problem occurred while trying to exchange data with the | object.
2704	This | object has no presentation information.
2707	A file needed to complete the operation could not be opened.
2711	An object needed to complete the operation is missing.
2713	A problem occurred using the | object's name information.
2714	The | object has no supported verbs.
2715	The verb index is out of range for this | object.
2717	This | object is not initialized or is missing presentation information.
2719	A problem occurred while operating on the | object.
2723	This | object does not support the attempted operation.
2724	One or more of the OLE support .DLL's installed on your machine is the incorrect version.
2725	There is a problem with the registration database.
2726	I/O Error reading REG.DAT.
2727	I/O Error writing REG.DAT.
2728	Operation was cancelled.
2729	The active OLE object is busy.  Complete the current operation or press Enter and then try again.
2730	Can't communicate with object application.  Please try again later.
2731	An error occurred with the object application.  It may not be registered correctly.
2732	A problem occurred accessing the | object's storage.
2733	Object storage cannot be accessed.
2734	The | object cannot be saved at this time.
2735	Write protect error while saving the | object.
2736	That file already exists.
2737	The file could not be found.
2738	Insufficient memory to access | object's storage.
2739	The storage is in use by another user.
2740	The | object's storage is locked by another user.
2741	Out of space while saving the | object.
2742	No more files could be created.
2743	The | object is stored in a format not compatible with the version of OLE on your computer.
2744	The path you specified was not found.
2745	SHARE.EXE must be installed for OLE support to work correctly.
2746	Too many OLE objects on your form.
2747	An error occurred while drawing a | object.
2748	That feature is not available for the | object.
2749	Not enough memory to complete the operation on the | object.
2750	The operation on the | object could not be successfully completed.
2751	Operation aborted.
2752	An internal error occurred passing an argument.
2753	Error during OLE operation.
2754	Error communicating with object application.
2755	Error while driving object application.
2756	Error accessing OLE object's storage.
2757	Error using OLE object.
2758	There was a problem initializing MSAOLE20.DLL.
2759	More arguments were supplied than are accepted by the object member.
2760	An internal error occurred while referencing the object member.
2761	An error occurred while referencing the object member.
2762	| returned an error while referencing the object member.
2763	|1 returned the following error: |2
2764	The object does not allow the member to be set.
2765	The object cannot convert one of the arguments passed to the member.
2766	The object does not contain a member named |.
2767	The object does not support the language in use.
2768	The array index is outside the bounds of the object member.
2769	The object member contains a data type not supported by Access Basic.
2770	The object referenced is not an active OLE object.
2771	Object frame doesn't contain an OLE object.
2772	Can't find OLE object class '|'.
2773	The class | does not support OLE Automation.
2774	The object does not support OLE Automation.
2775	More arguments are being passed to the object member than are supported by Access Basic.
2776	The object member is not an array.
2777	The required class name was not supplied or was invalid.
2778	Either a class or file name is missing.
2779	No data was returned by the object member.
2780	The class | does not support loading objects from a file.
2781	No object of class |1 could be loaded from file |2.  Check both the class and file name.
2782	The object member does not contain a value.
2783	Invalid setting of Action property.
2784	The SourceDoc property entry is too long.
2785	Invalid SourceDoc or SourceItem properties were set.  The source application couldn't open the document.
2786	The OLE object created or in use is not a linked OLE object.
2787	Can't copy unbound OLE object in browse mode.
2788	The | object is not stored as linked object.
2789	The Action property can be set only in Form view.
2790	Can't create an embedded OLE object in a control that only allows Linked OLE object.
2791	Can't create a Linked OLE object in a control that only allows Embedded OLE object.
2792	Can't save a locked OLE object.
2793	Can't perform the operation specified in the Action property setting because the object frame is either locked or disabled.
2794	The OLE Custom Control does not match its description in the registration database.
2795	The | object contains an event name longer than or results in a procedure name longer than 40 characters.
2796	The | object event contains an unnamed parameter.
2797	OLE 1 objects cannot be presented as icons
2798	Can't perform the OLE_DELETE operation specified in the Action property on an object in a bound object frame.
2799	The object cannot be activated on receiving focus.
2800-2899

2800	The object is locked and any changes you made will be discarded when the form is closed.
2801	The OLE object is not loaded because the unbound OLE control has not been initialized.
2802	An OLE Custom Control may only be placed in an unbound object frame.
2803	You do not have sufficient access rights or license as required to open or create the OLE object.
3000-3099

3000	Reserved error (|); there is no message for this error.
3001	Invalid argument.
3002	Couldn't start session.
3003	Couldn't start transaction; too many transactions already nested.
3004	Couldn't find database '|'.
3005	'|' isn't a valid database name.
3006	Database '|' is exclusively locked.
3007	Can't open library database '|'.
3008	Table '<tablename>' is exclusively locked.
3009	Couldn't lock table '<tablename>'; currently in use.
3010	Table '<tablename>' already exists.
3011	Couldn't find object '|'.
3012	Object '|' already exists.
3013	Couldn't rename installable ISAM file.
3014	Can't open any more tables.
3015	'<tablename>' isn't an index in this table.
3016	Field won't fit in record.
3017	Field length is too long.
3018	Couldn't find field '<fieldname>'.
3019	Operation invalid without a current index.
3020	Update without AddNew or Edit.
3021	No current record.
3022	Duplicate value in index, primary key, or relationship.  Changes were unsuccessful.
3023	AddNew or Edit already used.
3024	Couldn't find file '|'.
3025	Can't open any more files.
3026	Not enough space on disk.
3027	Can't update.  Database or object is read-only.
3028	Can't start Microsoft Access.  The system database (typically SYSTEM.MDA) is missing or opened exclusively by another user.
3029	Not a valid account name or password.
3030	'|' isn't a valid account name.
3031	Not a valid password.
3032	Can't perform this operation.
3033	No permission for '|'.
3034	Commit or Rollback without BeginTrans.
3036	Database has reached maximum size.
3037	Can't open any more tables or queries.
3039	Couldn't create index; too many indexes already defined.
3040	Disk I/O error during read.
3041	Can't open a database created with a version of Microsoft Access that is newer than this one.
3042	Out of MS-DOS file handles.
3043	Disk or network error.
3044	'|' isn't a valid path.
3045	Couldn't use '|'; file already in use.
3046	Couldn't save; currently locked by another user.
3047	Record is too large.
3048	Can't open any more databases.
3049	Can't open database '|'.  It may not be a Microsoft Access database, or the file may be corrupt.
3050	Couldn't lock file; SHARE.EXE hasn't been loaded.
3051	Couldn't open file '|'.
3052	MS-DOS file sharing lock count exceeded.  You need to increase the number of locks installed with SHARE.EXE.
3053	Too many client tasks.
3054	Too many Memo or OLE object fields.
3055	Not a valid file name.
3056	Couldn't repair this database.
3057	Operation not supported on attached tables.
3058	Index or primary key can't contain a null value.
3059	Operation cancelled by user.
3060	Wrong data type for parameter '|'.
3061	|1 parameters were expected, but only |2 were supplied.
3062	Duplicate output alias '|'.
3063	Duplicate output destination '|'.
3064	Can't open action query '<queryname>'.
3065	Can't execute a non-action query.
3066	Query must have at least one output field.
3067	Query input must contain at least one table or query.
3068	Not a valid alias name.
3069	Can't have action query '<queryname>' as an input.
3070	Can't bind name '|'.
3071	Can't evaluate expression.
3073	Operation must use an updatable query.
3074	Can't repeat table name '<tablename>' in FROM clause.
3075	<> in query expression '<expr>'.
3076	| in criteria expression.
3077	| in expression.
3078	Couldn't find input table or query '<tablename>'.
3079	Ambiguous field reference '<fieldname>'.
3080	Joined table '<tablename>' not listed in FROM clause.
3081	Can't join more than one table with the same name (<tablename>).
3082	JOIN operation '<tablename>' refers to a non-joined table.
3083	Can't use internal report query.
3084	Can't insert into action query.
3085	Undefined function '|' in expression.
3086	Couldn't delete from specified tables.
3087	Too many expressions in GROUP BY clause.
3088	Too many expressions in ORDER BY clause.
3089	Too many expressions in DISTINCT output.
3090	Resultant table may not have more than one Counter field.
3091	HAVING clause (|) without grouping or aggregation.
3092	Can't use HAVING clause in TRANSFORM statement.
3093	ORDER BY clause (|) conflicts with DISTINCT.
3094	ORDER BY clause (|) conflicts with GROUP BY clause.
3095	Can't have aggregate function in expression (|).
3096	Can't have aggregate function in WHERE clause (|).
3097	Can't have aggregate function in ORDER BY clause (|).
3098	Can't have aggregate function in GROUP BY clause (|).
3099	Can't have aggregate function in JOIN operation (|).
3100-3199

3100	Can't set field '<fieldname>' in join key to Null.
3101	There is no record in table '<tablename>' with key matching field(s) '<fieldname>'.
3102	Circular reference caused by '|'.
3103	Circular reference caused by alias '<aliasname>' in query definition's SELECT list.
3104	Can't specify Fixed Column Heading '<expr>' in a crosstab query more than once.
3105	Missing destination field name in SELECT INTO statement (<sqlstmt>).
3106	Missing destination field name in UPDATE statement (<sqlstmt>).
3107	Record(s) can't be added; no Insert Data permission on '|'.
3108	Record(s) can't be edited; no Update Data permission on '|'.
3109	Record(s) can't be deleted; no Delete Data permission on '|'.
3110	Couldn't read definitions; no Read Design permission for table or query '<tablename>'.
3111	Couldn't create; no Create permission for table or query '<tablename>'.
3112	Record(s) can't be read; no Read Data permission on '|'.
3113	Can't update '<fieldname>'; field not updatable.
3114	Can't include Memo or OLE object when you select unique values (|).
3115	Can't have Memo or OLE object in aggregate argument (|).
3116	Can't have Memo or OLE object in criteria (|) for aggregate function.
3117	Can't sort on Memo or OLE object (|).
3118	Can't join on Memo or OLE object (|).
3119	Can't group on Memo or OLE object (|).
3120	Can't group on fields selected with '*' (<>).
3121	Can't group on fields selected with '*'.
3122	'|' not part of aggregate function or grouping.
3123	Can't use '*' in crosstab query.
3124	Can't input from internal report query (<expr>).
3125	'|' isn't a valid name.
3126	Invalid bracketing of name '|'.
3127	INSERT INTO statement contains unknown field name '<fieldname>'.
3128	Must specify tables to delete from.
3129	Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'.
3130	Syntax error in DELETE statement.
3131	Syntax error in FROM clause.
3132	Syntax error in GROUP BY clause.
3133	Syntax error in HAVING clause.
3134	Syntax error in INSERT statement.
3135	Syntax error in JOIN operation.
3136	Syntax error in LEVEL clause.
3137	Missing semicolon (;) at end of SQL statement.
3138	Syntax error in ORDER BY clause.
3139	Syntax error in PARAMETERS clause.
3140	Syntax error in PROCEDURE clause.
3141	Syntax error in SELECT statement.
3142	Characters found after end of SQL statement.
3143	Syntax error in TRANSFORM statement.
3144	Syntax error in UPDATE statement.
3145	Syntax error in WHERE clause.
3146	ODBC--call failed.
3151	ODBC--connection to '|' failed.
3154	ODBC--couldn't find DLL '|'.
3155	ODBC--insert failed on attached table '<tablename>'.
3156	ODBC--delete failed on attached table '<tablename>'.
3157	ODBC--update failed on attached table '<tablename>'.
3158	Couldn't save record; currently locked by another user.
3159	Not a valid bookmark.
3160	Table isn't open.
3161	Couldn't decrypt file.
3162	Null is invalid.
3163	Couldn't insert or paste; data too long for field.
3164	Field can't be updated.
3165	Couldn't open .INF file.
3166	Missing memo file.
3167	Record is deleted.
3168	Invalid .INF file.
3169	Illegal type in expression.
3170	Couldn't find installable ISAM.
3171	Couldn't find net path or user name.
3172	Couldn't open PARADOX.NET.
3173	Couldn't open table 'MSysAccounts' in the system database file (SYSTEM.MDA).
3174	Couldn't open table 'MSysGroups' in the system database file (SYSTEM.MDA).
3175	Date is out of range or is in an invalid format.
3176	Couldn't open file '|'.
3177	Not a valid table name.
3179	Encountered unexpected end of file.
3180	Couldn't write to file '|'.
3181	Invalid range.
3182	Invalid file format.
3183	Not enough space on temporary disk.
3184	Couldn't execute query; couldn't find linked table.
3185	SELECT INTO remote database tried to produce too many fields.
3186	Couldn't save; currently locked by user '|2' on machine '|1'.
3187	Couldn't read; currently locked by user '|2' on machine '|1'.
3188	Couldn't update; currently locked by another session on this machine.
3189	Table '<tablename>' is exclusively locked by user '<username>' on machine '<machinename>'.
3190	Too many fields defined.
3191	Can't define field more than once.
3192	Couldn't find output table '<tablename>'.
3193	(unknown)
3194	(unknown)
3195	(expression)
3196	Couldn't use '|'; database already in use.
3197	Data has changed; operation stopped.
3198	Couldn't start session.  Too many sessions already active.
3199	Couldn't find reference.
3200-3299

3200	Can't delete or change record.  Since related records exist in table '<tablename>', referential integrity rules would be violated.
3201	Can't add or change record.  Referential integrity rules require a related record in table '<tablename>'.
3202	Couldn't save; currently locked by another user.
3203	Can't specify subquery in expression (<expr>).
3204	Database already exists.
3205	Too many crosstab column headers (|).
3206	Can't create a relationship between a field and itself.
3207	Operation not supported on Paradox table with no primary key.
3208	Invalid Deleted entry in [dBASE ISAM] section in msacc20.ini.
3209	Invalid Stats entry in [dBASE ISAM] section in msacc20.ini.
3210	Connection string too long.
3211	Couldn't lock table '<tablename>'; currently in use.
3212	Can't lock table '<tablename>'; currently in use by user '<username>' on machine '<machinename>'.
3213	Invalid Date entry in [dBASE ISAM] section in msacc20.ini.
3214	Invalid Mark entry in [dBASE ISAM] section in msacc20.ini.
3215	Too many Btrieve tasks.
3216	Parameter '<tablename>' specified where a table name is required.
3217	Parameter '|' specified where a database name is required.
3218	Couldn't update; currently locked.
3219	Invalid operation.
3220	Wrong Paradox sort sequence.
3221	Invalid entries in [Btrieve] section in WIN.INI.
3222	Query can't contain a Database parameter.
3223	'|' isn't a valid parameter name.
3224	Can't read Btrieve data dictionary.
3225	Encountered record locking deadlock while performing Btrieve operation.
3226	Errors encountered while using the Btrieve DLL.
3227	Invalid Century entry in [dBASE ISAM] section in msacc20.ini.
3228	Invalid CollatingSequence entry in [Paradox ISAM] or [dBASE ISAM] section in msacc20.ini.
3229	Btrieve--can't change field.
3230	Out-of-date Paradox lock file.
3231	ODBC--field would be too long; data truncated.
3232	ODBC--couldn't create table.
3234	ODBC--remote query timeout expired.
3235	ODBC--data type not supported on server.
3238	ODBC--data out of range.
3239	Too many active users.
3240	Btrieve--missing WBTRCALL.DLL.
3241	Btrieve--out of resources.
3242	Invalid reference in SELECT statement.
3243	None of the import field names match fields in the appended table.
3244	Can't import password-protected spreadsheet.
3245	Couldn't parse field names from first row of import table.
3246	Operation not supported in transactions.
3247	ODBC--linked table definition has changed.
3248	Invalid NetworkAccess entry in msacc20.ini.
3249	Invalid PageTimeout entry in msacc20.ini.
3250	Couldn't build key.
3251	Feature not available.
3252	Can't open form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property.
3254	ODBC--Can't lock all records.
3256	Index file not found.
3257	Syntax error in WITH OWNERACCESS OPTION declaration.
3258	Query contains ambiguous outer joins.
3259	Invalid field data type.
3260	Couldn't update; currently locked by user '|2' on machine '|1'.
3261	|
3262	|
3263	Invalid database object.
3264	No fields defined - cannot append table.
3265	Name not found in this collection.
3266	Can't append.  Field is part of a TableDefs collection.
3267	Property can be set only when the field is part of a Recordset object's Fields collection.
3268	Can't set this property once the object is part of a collection.
3269	Can't append.  Index is part of a TableDefs collection.
3270	Property not found.
3271	Invalid property value.
3272	Object isn't a collection.
3273	Method not applicable for this object.
3274	External table isn't in the expected format.
3275	Unexpected error from external database driver (|).
3276	Invalid database ID.
3277	Can't have more than 10 fields in an index.
3278	Database engine hasn't been initialized.
3279	Database engine has already been initialized.
3280	Can't delete a field that is part of an index.
3281	Can't delete this index.  It is either the current index or is used in a relationship.
3282	Can't define field or index in a table that contains data.
3283	Primary key already exists.
3284	Index already exists.
3285	Invalid index definition.
3286	Format of memo file doesn't match specified external database format.
3287	Can't create index on Memo field or OLE Object field.
3288	Paradox index is not primary.
3289	Syntax error in CONSTRAINT clause.
3290	Syntax error in CREATE TABLE statement.
3291	Syntax error in CREATE INDEX statement.
3292	Syntax error in field definition.
3293	Syntax error in ALTER TABLE statement.
3294	Syntax error in DROP INDEX statement.
3295	Syntax error in DROP TABLE statement.
3296	Join expression not supported.
3297	Can't import table or query.  No records found, or all records contain errors.
3298	There are several tables with that name.  Please specify owner in the format 'owner.table'.
3299	ODBC Specification Conformance Error (|).  This error should be reported to the ODBC driver vendor.
3300-3399

3300	Can't create a relationship.
3301	Can't perform this operation; features in this version of Microsoft Access are not available in databases with older formats.
3302	Can't change a rule while the rules for this table are in use.
3303	Can't delete this field.  It's part of one or more relationships.
3304	You must enter a personal identifier (PID) consisting of at least four and no more than 20 characters and digits.
3305	Invalid connection string in pass-through query.
3306	At most one field can be returned from a subquery that doesn't use the EXISTS keyword.
3307	The number of columns in the two selected tables or queries of a union query don't match.
3308	Invalid TOP argument in select query.
3309	Property setting can't be larger than 2 KB.
3310	This property isn't supported for external data sources or for databases created in a previous version of Microsoft Access.
3311	Property specified already exists.
3312	Validation rules and default values can't be placed on system or attached tables.
3313	Can't place this validation expression on this field.
3314	Field '<fieldname>' can't contain a null value.
3315	Field '<fieldname>' can't be a zero-length string.
3316	|
3317	One or more values entered is prohibited by the validation rule '|2' set for '|1'.
3318	Top not allowed in delete queries.
3319	Syntax error in union query.
3320	<> in table-level validation expression.
3321	No database specified in connection string or IN clause.
3322	Crosstab query contains one or more invalid fixed column headings.
3323	Query does not return records.
3324	Execute method must be used on action or data-definition queries.
3325	Pass-through query with ReturnsRecords property set to True did not return any records.
3326	This Recordset is not updatable.
3327	Field '<fieldname>' is based on an expression and can't be edited.
3328	Table '<tablename>' is read-only.
3329	Record in table '<tablename>' was deleted by another user.
3330	Record in table '<tablename>' is locked by another user.
3331	To make changes to this field, first save the record.
3332	Can't enter value into blank field on 'one' side of outer join.
3333	Records in table '<tablename>' would have no record on the 'one' side.
3334	Can be present only in version 1.0 format.
3335	DeleteOnly called with non-zero cbData.
3336	Btrieve: Invalid IndexDDF option in msacc20.ini.
3337	Invalid DataCodePage option in msacc20.ini.
3338	Btrieve: Xtrieve options aren't correct in msacc20.ini.
3339	Btrieve: Invalid IndexDeleteRenumber option in msacc20.ini.
3340	Query '<queryname>' is corrupt.
3341	Current field must match join key '<fieldname>' on 'one' side of outer join.
3342	Invalid Memo or OLE object in subquery '<queryname>'.
3343	Unrecognized database format '|'.
3344	Unknown or invalid reference '<reference>' in validation expression or default value in table '<tablename>'.
3345	Unknown or invalid field reference '<fieldname>'.
3346	Number  of query values and destination fields aren't the same.
3347	Can't add record(s); primary key for table '<tablename>' not in recordset.
3348	Can't add record(s); join key of table '<tablename>' not in recordset.
3349	Numeric field overflow.
3350	Object is invalid for operation.
3351	ORDER BY expression (<expr>) uses non-output fields.
3352	No destination field name in INSERT statement (<sqlstmt>).
3353	Btrieve: Can't find file FIELD.DDF.
3354	At most one record can be returned by this subquery.
3355	Syntax error in default value.
3356	The database is opened by user '|2' on machine '|1'.  You can't open this database exclusively.
3357	This query is not a properly formed data-definition query.
3358	Can't open Microsoft Access system database (typically SYSTEM.MDA).
3359	Pass-through query must contain at least one character.
3360	Query is too complex.
3361	Unions not allowed in a subquery.
3362	Single-row update/delete affected more than one row of a remote table.  Index specified as unique contains duplicate values.
3363	Record(s) can't be added; no corresponding record on the 'one' side.
3364	Can't use Memo or OLE object field '<fieldname>' in SELECT clause of a union query.
3365	Can't set this property for remote objects.
3366	Can't append a relation with no fields defined.
3367	Can't append.  Object already in collection.
3368	Relationship must be on the same same number of fields with the same data types.
3369	Can't find field in index definition.
3370	Can't modify the design of table '<tablename>'.  It's in a read-only database.
3371	Can't find table or constraint.
3372	No such index '<indexname>' on table '<tablename>'.
3373	Can't create relationship.  Referenced table '<tablename>' doesn't have a primary key.
3374	The specified fields are not uniquely indexed in table '<tablename>'.
3375	Table '<table1>' already has an index named '<table2>'
3376	Table '<tablename>' doesn't exist.
3377	No such relationship '<relationname>' on table '<tablename>'.
3378	There is already a relationship named '|' in the current database.
3379	Can't create relationships to enforce referential integrity.  Existing data in table '<tablename>' violates referential integrity rules with related table '<tablename>'.
3380	Field '<fieldname>' already exists in table '<tablename>'.
3381	There is no field named '<fieldname>' in table '<tablename>'.
3382	Field '<fieldname>' size must be 1 to 255.
3383	Can't delete field '<fieldname>'.  It's part of one or more relationships.
3384	Can't delete a built-in property.
3385	User-defined properties don't support a Null value.
3386	Property '|' must be set before using this method.
3387	Can't find TEMP directory.
3388	Unknown function '|2' in validation expression or default value on '|1'.
3389	Query support unavailable.
3390	Account name already exists.
3391	An error has occurred.  Properties were not saved.
3392	There is no primary key in table '<tablename>'.
3393	Can't perform join, group, or sort. Combined fields are too long.
3394	Can't save property; property is a schema property.
3395	Invalid referential integrity constraint.
3396	Can't perform cascading operation.  Since related records exist in table '<tablename>', referential integrity rules would be violated.
3397	Can't perform cascading operation.  There must be a related record in table '<tablename>'.
3398	Can't perform cascading operation.  It would result in a null key in table '<tablename>'.
3399	Can't perform cascading operation.  It would result in a duplicate key in table '<tablename>'.
3400-3499

3400	Can't perform cascading operation.  It would result in two updates on field '<fieldname>' in table '<tablename>'.
3401	Can't perform cascading operation.  It would cause field '<fieldname>' to become null, which is not allowed.
3402	Can't perform cascading operation.  It would cause field '<fieldname>' to become a zero-length string, which is not allowed.
3403	Can't perform cascading operation:  '|'
3404	Can't perform cascading operation.  The value entered is prohibited by the validation rule '|2' set for '|1'.
3405	Error '|' in validation rule.
3406	Error '|' in default value.
3407	The server's MSysConf table exists, but is in an incorrect format.  Contact your system administrator.
3408	Too many FastFind Sessions were invoked.
3409	Invalid field name '<fieldname>' in definition of index or relationship.
3410	Can't open this database for update.
3411	Invalid entry.  Can't perform cascading operation specified in table '<tablename>' because value entered is too big for field '<fieldname>'.
3412	|
3413	Can't perform cascading update on table '<tablename>' because it is currently in use by user '<username>' on machine '<machinename>'.
3414	Can't perform cascading update on table '<tablename>' because it is currently in use.
3415	Zero-length string is valid only in a text or Memo field.
3416	|
3417	Can't have action query as an input.
3418	Can't open '<tablename>'.  Another user has the table open using a different network control file or locking style.
3419	Can't open this Paradox 4.x table because ParadoxNetStyle is set to 3.x in msacc20.ini.
3420	Object is no longer valid.
3421	Data type conversion error.
3422	Can't modify table structure.  Another user has the table open.
3423	You cannot use ODBC to attach an external Microsoft Access or ISAM database table to your database.
3424	Can't create database; Invalid locale.
3425	This method or property is not currently available on this Recordset.
3426	The action was cancelled by an associated object.
3427	Error in DAO automation.
3428	The Jet database engine has encountered a problem in your database.  To correct the problem, you must repair and compact the database.
7700-7799

7750	Can't set this property because the control is part of an option group.
7751	Can't retrieve the ObjectPalette property setting of a bound OLE object in Design view.
7752	Can't apply filter if all records are locked.
7753	|
7754	Can't move datasheet column.
7755	Can't start Chart Wizard.  Make sure Form Wizards are installed.
7800-7899

7850	Can't find Wizard, or there is a syntax error in the Declarations section of an Access Basic module. Check the [Libraries] section of msacc20.ini for required Wizard libraries, and compile all Access Basic modules in the database.
7851	This database already contains a toolbar named '|'.
7852	'|' isn't a valid toolbar name.
7853	The default column width must be at least 0.1 inch.
7854	Tables are the only objects that can be exported from version 2.0 to version 1.x databases.  No objects can be imported or attached to in version 1.x databases opened in Microsoft Access 2.0.
7855	Can't load import/export functions.
7856	Can't change menu while object application is active.
7857	Can't display system information.
7858	The tab stop width must be an integer from 1 to 30.
7900-7999

7900	Can't create error table; unable to convert database.
7901	Can't write to error table; unable to convert database.
7902	Errors occurred converting ## validation rules and default values.  See error table '<errtablename>' for errors.
7903	Can't insert this field.  There are too many fields in the table.
7904	An error has occurred in the Field Builder.
7905	Can't change field data types.  Some data in this table violates the record validation rule.  Before any data types can be changed, remove the record validation rule or correct the data.
7950	Can't refer to RecordsetClone property in Design view.
7951	Invalid reference to RecordsetClone property.


Sorted by Error Message
Error Messages (Alphabetic order)

  Show Error Codes

Miscellaneous

| errors occurred while loading.	2106
| in criteria expression.	3076
| in expression.	3077
| in validation rule.	2470
| Not Yet Implemented.	2003
| returned an error while referencing the object member.	2762
|1 in validation rule: '|2'.	2469
|1 parameters were expected, but only |2 were supplied.	3061
|1 returned the following error: |2	2763
|1This file already exists.|2Replace existing file?	2308
A

A display driver resolution of at least 400 x 340 pixels is required to run Microsoft Access.	2066
A field name in the LinkMasterFields property is too long.	2325
A file needed to complete the operation could not be opened.	2707
A form can't be a subform within itself, and a report can't be a subreport within itself.	2133
A problem occurred accessing the | object's storage.	2732
A problem occurred using the | object's name information.	2713
A problem occurred while operating on the | object.	2719
A problem occurred while trying to exchange data with the | object.	2703
A problem occurred while using the object application.	2699
A Specification Name is required for fixed-width import/export.	2511
A system resource necessary for drawing the | object was not available.	2690
Access Basic compile error.	2155
Access Basic compile error.  View error in context?	2156
Account name already exists.	3390
Action | was cancelled.	2501
Action isn't available because current window isn't a form or report window.	2488
Action isn't valid because the form or report isn't bound to a table or query.	2491
Action requires a Control Name argument.	2514
Action requires a File Name argument.	2522
Action requires a Form Name argument.	2494
Action requires a Macro Name argument.	2502
Action requires a Macro Name argument.	2518
Action requires a Module or Procedure Name argument.	2520
Action requires a Query Name argument.	2496
Action requires a Report Name argument.	2497
Action requires a Table Name argument.	2495
Action requires an Object Name argument.	2493
Action requires at least | argument(s).	2504
Add-In menu expression '|' is too long and will be ignored.	2087
Add-In menu expression is empty and will be ignored.	2088
AddNew or Edit already used.	3023
Ambiguous field reference '<fieldname>'.	3079
An action within the current global menu's macro group can't change the global menu bar.	2090
An argument in the command line used to start Microsoft Access wasn't valid and was ignored.	2045
An error has occurred in the Field Builder.	7904
An error has occurred.  Properties were not saved.	3391
An error occurred while attempting to retrieve printer information for the |1 on |2	2201
An error occurred while drawing a | object.	2747
An error occurred while initializing print or graphics methods.	2160
An error occurred while referencing the object member.	2761
An error occurred while sending data to the object application.	2260
An error occurred with the object application.  It may not be registered correctly.	2731
An expression can't be longer than 2,048 characters.	2131
An internal error occurred passing an argument.	2752
An internal error occurred while referencing the object member.	2760
An object needed to complete the operation is missing.	2711
An OLE Custom Control may only be placed in an unbound object frame.	2802
An unrecoverable error occurred while reading the file '|'.	2244
Argument type mismatch.	2498
At most one field can be returned from a subquery that doesn't use the EXISTS keyword.	3306
At most one record can be returned by this subquery.	3354
## attached tables could not be refreshed during conversion.	2559
B

Bad DLL calling convention	49
Bad file mode	54
Bad file name	64
Bad file name or number	52
Bad record length	59
Bad record number	63
Between operator without And	2430
Btrieve--can't change field.	3229
Btrieve--missing WBTRCALL.DLL.	3240
Btrieve--out of resources.	3241
Btrieve: Can't find file FIELD.DDF.	3353
Btrieve: Invalid IndexDDF option in msacc20.ini.	3336
Btrieve: Invalid IndexDeleteRenumber option in msacc20.ini.	3339
Btrieve: Xtrieve options aren't correct in msacc20.ini.	3338
C

Can be present only in version 1.0 format.	3334
Can't add or change record.  Referential integrity rules require a related record in table '<tablename>'.	3201
Can't add record(s); join key of table '<tablename>' not in recordset.	3348
Can't add record(s); primary key for table '<tablename>' not in recordset.	3347
Can't add section.  Doing so would exceed maximum combined section size limit.  You must shrink one of the existing sections first.	2178
Can't append a relation with no fields defined.	3366
Can't append.  Field is part of a TableDefs collection.	3266
Can't append.  Index is part of a TableDefs collection.	3269
Can't append.  Object already in collection.	3367
Can't apply filter if all records are locked.	7752
Can't attach object.  Message not sent.	2294
Can't bind name '|'.	3070
Can't carry out | action because nothing is selected.	2546
Can't change a rule while the rules for this table are in use.	3302
Can't change data type to Counter in a table with data.	2377
Can't change field data types.  Some data in this table violates the record validation rule.  Before any data types can be changed, remove the record validation rule or correct the data.	7905
Can't change menu while object application is active.	7856
Can't change one field from the Counter type and add another Counter field at the same time.	2384
Can't change primary key.  This table is the Primary Table in one or more relationships.	2388
Can't change the data type or field size of this field.  It is part of one or more relationships.	2390
Can't change to directory; path too long.	2054
Can't close file.	2286
Can't communicate with object application.  Please try again later.	2730
Can't connect with object application.	2691
Can't continue	17
Can't convert a database if the source and destination databases have the same name and path.	2555
Can't convert this database.  You must have 'Modify Design' permissions on all tables.	2558
Can't copy '|' to itself.	2548
Can't copy unbound OLE object in browse mode.	2787
Can't create a field list on an action query: '<query>'.	2060
Can't create a Linked OLE object in a control that only allows Embedded OLE object.	2791
Can't create a primary key on a field of this data type.	2379
Can't create a relationship between a field and itself.	3206
Can't create a relationship between fields with the Memo, OLE Object, or Yes/No data type.	2651
Can't create a relationship.	3300
Can't create a temporary query.	2339
Can't create an embedded OLE object in a control that only allows Linked OLE object.	2790
Can't create an index or primary key on more than 10 fields.	2374
Can't create database; Invalid locale.	3424
Can't create error table; unable to convert database.	7900
Can't create file.	2285
Can't create import/export specification for a Microsoft Access database stored in an out-of-date format.	2097
Can't create index on Memo field or OLE Object field.	3287
Can't create index or primary key because one or more field names are missing.	2396
Can't create primary key. Changes weren't saved.	2371
Can't create primary key; field doesn't have a name.	2381
Can't create primary key; no fields selected.	2380
Can't create primary key; too many fields.	2376
Can't create relationship to enforce referential integrity.  Existing data in table '<tablename>' violates referential integrity rules.	2646
Can't create relationship to enforce referential integrity.  Matching fields must have the same data type.	2650
Can't create relationship to enforce referential integrity.  The field(s) in the primary table must be the primary key or have a unique index.	2649
Can't create relationship.  Referenced table '<tablename>' doesn't have a primary key.	3373
Can't create relationships to enforce referential integrity.  Existing data in table '<tablename>' violates referential integrity rules with related table '<tablename>'.	3379
Can't create, open, or write to index file '|'.	2063
Can't define field more than once.	3191
Can't define field or index in a table that contains data.	3282
Can't delete a built-in property.	3384
Can't delete a field that is part of an index.	3280
Can't delete field '<fieldname>'.  It is part of one or more relationships.	2389
Can't delete field '<fieldname>'.  It's part of one or more relationships.	3383
Can't delete or change record.  Since related records exist in table '<tablename>', referential integrity rules would be violated.	3200
Can't delete table '<tablename>'.  It is participating in one or more relationships.	2387
Can't delete this field.  It's part of one or more relationships.	3303
Can't delete this index.  It is either the current index or is used in a relationship.	3281
Can't deliver an encrypted database.	2556
Can't disable the control that has the focus.	2164
Can't display a submenu twice in the same menu hierarchy.	2089
Can't display system information.	7857
Can't display the field in which Total cell is 'Where'.  Turn off the Show option for that field.	2320
Can't end browse mode from this form event.	2174
Can't enter value into blank field on 'one' side of outer join.	3332
Can't evaluate expression.	3071
Can't execute a non-action query.	3065
Can't execute this function with the Sorting and Grouping box open.	2154
Can't find field in index definition.	3369
Can't find file: '|'.  Please verify that the correct path and file name are given.	2043
Can't find Macro Name '|2' in Macro Group '|1'.	2492
Can't find OLE object class '|'.	2772
Can't find table or constraint.	3371
Can't find TEMP directory.	3387
Can't find Wizard, or there is a syntax error in the Declarations section of an Access Basic module. Check the [Libraries] section of msacc20.ini for required Wizard libraries, and compile all Access Basic modules in the database.	7850
Can't go to specified record.	2105
Can't group on fields selected with '*' (<>).	3120
Can't group on fields selected with '*'.	3121
Can't group on Memo or OLE object (|).	3119
Can't have a Criteria clause on fields added to the QBE grid with the asterisk.	2323
Can't have action query '<queryname>' as an input.	3069
Can't have action query as an input.	3417
Can't have aggregate function in expression (|).	3095
Can't have aggregate function in GROUP BY clause (|).	3098
Can't have aggregate function in JOIN operation (|).	3099
Can't have aggregate function in ORDER BY clause (|).	3097
Can't have aggregate function in WHERE clause (|).	3096
Can't have indexes without names.	2395
Can't have Memo or OLE object in aggregate argument (|).	3115
Can't have Memo or OLE object in criteria (|) for aggregate function.	3116
Can't have more than 10 fields in an index.	3277
Can't hide the control that has the focus.	2165
Can't import password-protected spreadsheet.	3244
Can't import table or query.  No records found, or all records contain errors.	3297
Can't include Memo or OLE object when you select unique values (|).	3114
Can't input from internal report query (<expr>).	3124
Can't insert into action query.	3084
Can't insert this field.  There are too many fields in the table.	7903
Can't join more than one table with the same name (<tablename>).	3081
Can't join on Memo or OLE object (|).	3118
Can't load import/export functions.	7855
Can't load MSTOOLBR.DLL.	2096
Can't load or save object.	2228
Can't load the '|' format.	2288
Can't lock table '<tablename>'; currently in use by user '<username>' on machine '<machinename>'.	3212
Can't lock the control that has the focus.	2166
Can't match fields added to the QBE grid with the asterisk to a column or expression in an append query.	2332
Can't modify table structure.  Another user has the table open.	3422
Can't modify the design of table '<tablename>'.  It's in a read-only database.	3370
Can't move datasheet column.	7754
Can't move to control |.	2110
Can't move to previous control when no other control has had the focus.	2483
Can't obtain this property setting.  The property may not be available in this view, or an error may have occurred.	2196
Can't open '<tablename>'.  Another user has the table open using a different network control file or locking style.	3418
Can't open a database created with a version of Microsoft Access that is newer than this one.	3041
Can't open a mail session.	2287
Can't open action query '<queryname>'.	3064
Can't open any more databases.	3048
Can't open any more files.	3025
Can't open any more tables or queries.	3037
Can't open any more tables.	3014
Can't open database '|'.  It may not be a Microsoft Access database, or the file may be corrupt.	3049
Can't open DDE channel; Microsoft Access couldn't find the specified application and topic.	282
Can't open DDE channel; more than one application responded.	283
Can't open file for writing.  Check that the file is not currently in use and that you have enough disk space on the destination drive.	2302
Can't open form |.	2121
Can't open form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property.	3252
Can't open library database '|'.	3007
Can't open macro |.  This macro was saved using a different version of Microsoft Access.	2515
Can't open mail session.	2297
Can't open Microsoft Access system database (typically SYSTEM.MDA).	3358
Can't open table in Datasheet view.	2364
Can't open this database for update.	3410
Can't open this Paradox 4.x table because ParadoxNetStyle is set to 3.x in msacc20.ini.	3419
Can't open Zoom box.  File UTILITY.MDA is missing or has been modified.	2299
Can't output data.	2303
Can't output module in the requested format.	2289
Can't parse expression: '|'.	2512
Can't paste an object onto itself.  You must specify a different name.	2543
Can't paste beyond end of table.	2375
Can't paste item.	2112
Can't paste OLE object.	2234
Can't paste OLE object.	2243
Can't paste.	2226
Can't perform a Quick Sort on a calculated field.	2181
Can't perform a Quick Sort on this field, or within a subform.	2182
Can't perform cascading operation.  It would cause field '<fieldname>' to become a zero-length string, which is not allowed.	3402
Can't perform cascading operation.  It would cause field '<fieldname>' to become null, which is not allowed.	3401
Can't perform cascading operation.  It would result in a duplicate key in table '<tablename>'.	3399
Can't perform cascading operation.  It would result in a null key in table '<tablename>'.	3398
Can't perform cascading operation.  It would result in two updates on field '<fieldname>' in table '<tablename>'.	3400
Can't perform cascading operation.  Since related records exist in table '<tablename>', referential integrity rules would be violated.	3396
Can't perform cascading operation.  The value entered is prohibited by the validation rule '|2' set for '|1'.	3404
Can't perform cascading operation.  There must be a related record in table '<tablename>'.	3397
Can't perform cascading operation:  '|'	3403
Can't perform cascading update on table '<tablename>' because it is currently in use by user '<username>' on machine '<machinename>'.	3413
Can't perform cascading update on table '<tablename>' because it is currently in use.	3414
Can't perform join, group, or sort. Combined fields are too long.	3393
Can't perform the OLE_DELETE operation specified in the Action property on an object in a bound object frame.	2798
Can't perform the operation specified in the Action property setting because the object frame is either locked or disabled.	2793
Can't perform this operation.	3032
Can't perform this operation; features in this version of Microsoft Access are not available in databases with older formats.	3301
Can't place item at this location.	2100
Can't place this validation expression on this field.	3313
Can't print macros.	2207
Can't print or preview; page size larger than 22.75inches.	2210
Can't read Btrieve data dictionary.	3224
Can't refer to Parent property in Design view.	2459
Can't refer to RecordsetClone property in Design view.	2460
Can't refer to RecordsetClone property in Design view.	7950
Can't remove user from group '|'.	2605
Can't rename with different drive	74
Can't repeat table name '<tablename>' in FROM clause.	3074
Can't replace current value of field.	2139
Can't represent implicit VALUES clause in QBE grid.	2351
Can't represent join in Design view: '|'.	2330
Can't restore field's previous value; choose Undo Current Record or Undo Current Field from the Edit menu.	2116
Can't retrieve data for the list box.	2170
Can't retrieve the ObjectPalette property setting of a bound OLE object in Design view.	7751
Can't run application, missing command line arguments.	2554
Can't run macro from command line without specifying a database.	2542
Can't run query; parameter values too large.	2246
Can't run this action while in current code context.	2486
Can't run this action while processing a form or report event.	2585
Can't run update queries for fields added to the QBE grid with the asterisk.	2328
Can't save a locked OLE object.	2792
Can't save changes to this object because you don't have permission to write to the record.  Copy the object to the Clipboard if you want to save it, then choose Undo Field.	2278
Can't save property; property is a schema property.	3394
Can't save query of this type as SQL statement, or query contains a syntax error.  Please save query as a named query.	2350
Can't search data using current FindRecord action arguments.	2162
Can't search field because there was an error getting its value.	2138
Can't search in current field '<fieldname>'.	2173
Can't send message.	2293
Can't set alias to a null value.	2348
Can't set criteria unless you've specified a field.	2321
Can't set field '<fieldname>' in join key to Null.	3100
Can't set LinkMode; invalid LinkTopic.	297
Can't set PictureData property in Datasheet view.	2194
Can't set property '|' after printing has started.	2191
Can't set the IgnoreNulls property of a primary key to Yes.	2393
Can't set the subform control's SourceObject property to Null while displaying the main form in Form view.	2197
Can't set the Unique property of a primary key to No.	2392
Can't set this property because the control is part of an option group.	7750
Can't set this property for remote objects.	3365
Can't set this property once the object is part of a collection.	3268
Can't set this property; it's read-only.	2167
Can't set this property; it's read-only.	2135
Can't set value while in print preview.	2481
Can't set value.	2448
Can't show Totals on fields added to the QBE grid with the asterisk.	2324
Can't sort on fields added to the QBE grid with the asterisk.	2322
Can't sort on Memo or OLE object (|).	3117
Can't specify Fixed Column Heading '<expr>' in a crosstab query more than once.	3104
Can't specify subquery in expression (<expr>).	3203
Can't start Chart Wizard.  Make sure Form Wizards are installed.	7755
Can't start Microsoft Access.  The system database (typically SYSTEM.MDA) is missing or opened exclusively by another user.	3028
Can't start Microsoft Access. Please try again.	2042
Can't start object application.	2229
Can't start Wizard, builder, or add-in.	2298
Can't supply context-sensitive Help.	2056
Can't switch to |.	2095
Can't switch to Datasheet view and can't return to Design view.	2382
Can't update '<fieldname>'; field not updatable.	3113
Can't update.  Database or object is read-only.	3027
Can't use '*' in crosstab query.	3123
Can't use Find or Replace for one of the following reasons: There are no fields to search; fields have no data; data in fields can't be searched.	2137
Can't use GoToRecord action on an object in Design view.	2499
Can't use HAVING clause in TRANSFORM statement.	3092
Can't use internal report query.	3083
Can't use Memo or OLE object field '<fieldname>' in SELECT clause of a union query.	3364
Can't use this command with DoCmd.	2503
Can't use this method in the current view.	2478
Can't view a form as a continuous form if it contains a subform or an unbound OLE object.	2122
Can't write to error table; unable to convert database.	7901
Can't write to file.	2284
Can't write to file.  Make sure that you have enough disk space on your destination drive.	2304
Cannot destroy active form instance	95
Changes were made to the primary key.  This table is the primary table in one or more relationships.  Changes to the primary key won't be saved.	2398
Characters found after end of SQL statement.	3142
Circular reference caused by '|'.	3102
Circular reference caused by alias '<aliasname>' in query definition's SELECT list.	3103
Clipboard operation failed.  It may be in use by another application or you may be low on memory.	2694
Column Heading field must specify Group By in the Totals cell.	2327
ColumnWidths must be one or more values from 0 to 22 inches (55.87 cm), separated by ';' or the list separator.	2145
Command not available: |.	2046
COMMDLG.DLL failed: error code '0x|'.	2203
Commit or Rollback without BeginTrans.	3034
Compile error	90
Connection string too long.	3210
Controls can be created only in Design view.	2147
Couldn't append.  Field '<Field>' does not exist in destination table '<tablename>'.	2391
Couldn't build key.	3250
Couldn't change data type, because there either isn't enough disk space or enough memory.	2383
Couldn't compile module in utility or library databases.	2270
Couldn't create index; too many indexes already defined.	3039
Couldn't create; no Create permission for table or query '<tablename>'.	3111
Couldn't decrypt file.	3161
Couldn't decrypt.  Only the owner of a database may decrypt it.	2553
Couldn't delete '|1' after compacting it.  Compacted database is named '|2'	2549
Couldn't delete '|1' after decrypting it.  Decrypted database is named '|2'	2551
Couldn't delete '|1' after encrypting it.  Encrypted database is named '|2'	2550
Couldn't delete from specified tables.	3086
Couldn't encrypt.  Only the owner of a database may encrypt it.	2552
Couldn't execute query; couldn't find linked table.	3184
Couldn't find database '|'.	3004
Couldn't find field '<fieldname>'.	3018
Couldn't find file '|'.	3024
Couldn't find input table or query '<tablename>'.	3078
Couldn't find installable ISAM.	3170
Couldn't find net path or user name.	3171
Couldn't find object '|'.	3011
Couldn't find output table '<tablename>'.	3192
Couldn't find reference.	3199
Couldn't insert or paste; data too long for field.	3163
Couldn't lock file; SHARE.EXE hasn't been loaded.	3050
Couldn't lock table '<tablename>'; currently in use.	3211
Couldn't lock table '<tablename>'; currently in use.	3009
Couldn't open .INF file.	3165
Couldn't open file '|'.	2220
Couldn't open file '|'.	3051
Couldn't open file '|'.	3176
Couldn't open Palette.	2179
Couldn't open PARADOX.NET.	3172
Couldn't open table 'MSysAccounts' in the system database file (SYSTEM.MDA).	3173
Couldn't open table 'MSysGroups' in the system database file (SYSTEM.MDA).	3174
Couldn't open the Clipboard.	2225
Couldn't open toolbox.	2180
Couldn't parse field names from first row of import table.	3245
Couldn't read definitions; no Read Design permission for table or query '<tablename>'.	3110
Couldn't read; currently locked by user '|2' on machine '|1'.	3187
Couldn't rename installable ISAM file.	3013
Couldn't repair this database.	3056
Couldn't save field.  Please undo and then choose Find or Replace.	2140
Couldn't save field.  Please undo and then choose the Allow Editing command.	2146
Couldn't save record; currently locked by another user.	3158
Couldn't save the changes you made.  Click OK to try again, or click Cancel to undo your changes.	2111
Couldn't save; currently locked by another user.	3202
Couldn't save; currently locked by another user.	3046
Couldn't save; currently locked by user '|2' on machine '|1'.	3186
Couldn't start session.	3002
Couldn't start session.  Too many sessions already active.	3198
Couldn't start transaction; too many transactions already nested.	3003
Couldn't update; currently locked by another session on this machine.	3188
Couldn't update; currently locked by user '|2' on machine '|1'.	3260
Couldn't update; currently locked.	3218
Couldn't use '|'; database already in use.	3196
Couldn't use '|'; file already in use.	3045
Couldn't write to file '|'.	3180
Crosstab query contains one or more invalid fixed column headings.	3322
Cue Cards couldn't be started because of an incomplete setup.	2071
Current field must match join key '<fieldname>' on 'one' side of outer join.	3341
Currently unable to quit Microsoft Access.	2044
D

Data format error; can't paste.	2227
Data has changed; operation stopped.	3197
Data not provided when requested in DDE operation.	289
Data supplied in a DDE conversation is in the wrong format.	290
Data type conversion error.	3421
Database '|' is exclusively locked.	3006
Database already exists.	3204
Database engine has already been initialized.	3279
Database engine hasn't been initialized.	3278
Database has reached maximum size.	3036
Database is read-only -- cannot create specification tables.	2083
Date is out of range or is in an invalid format.	3175
DDE channel is locked.	284
DDE channel not fully closed; awaiting response from the other application.	280
DDE conversation closed or changed.	292
DDE method invoked with no channel open.	293
DeleteOnly called with non-zero cbData.	3335
Device I/O error	57
Device unavailable	68
Disk full	61
Disk I/O error during read.	3040
Disk not ready	71
Disk or network error.	3043
Division by zero	11
Document '<docname>' is open; you must close it before cutting it.	2010
Document '<docname>' is open; you must close it before deleting it.	2008
Document '<docname>' is open; you must close it before renaming it.	2009
Duplicate definition	10
Duplicate field name: '<fieldname>'.	2362
Duplicate index name: '|'.	2397
Duplicate output alias '|'.	3062
Duplicate output destination '|'.	3063
Duplicate value in index, primary key, or relationship.  Changes were unsuccessful.	3022
E

Either a class or file name is missing.	2778
Encountered record locking deadlock while performing Btrieve operation.	3225
Encountered unexpected end of file.	3179
Entry Required!	2079
Error '|' in default value.	3406
Error '|' in validation rule.	3405
Error accessing OLE object's storage.	2756
Error communicating with object application.	2754
Error during OLE operation.	2753
Error in DAO automation.	3427
Error in font initialization.	2277
Error in loading DLL	48
Error using OLE object.	2757
Error while driving object application.	2755
Errors encountered during OLE operation.  The problem ID is '|'.	2231
Errors encountered while using the Btrieve DLL.	3226
Errors occurred converting ## validation rules and default values.  See error table '<errtablename>' for errors.	7902
Errors were encountered during save.  |	2385
Errors were encountered during save.  All changes were saved except the field ordering was not saved successfully.	2366
Errors were encountered during save.  The new table was not created.	2386
Event procedure '|' can't be a function.	2479
Execute method must be used on action or data-definition queries.	3324
Expression is too long for the QBE grid and has been truncated: '|'.	2338
Expression is too long for the QBE grid.	2340
Expression not valid: '|'.	2055
Expression too complex	2445
External table isn't in the expected format.	3274
Extra right parenthesis: )	2435
F

Feature not available.	3251
Field '<fieldname>' already exists in table '<tablename>'.	3380
Field '<fieldname>' can't be a zero-length string.	3315
Field '<fieldname>' can't contain a null value.	3314
Field '<fieldname>' is based on an expression and can't be edited.	3327
Field '<fieldname>' size must be 1 to 255.	3382
Field can't be updated.	3164
Field length is too long.	3017
Field or record can't be saved while it's being validated.	2115
Field won't fit in record.	3016
File '|' can't be deleted.	2547
File '|' is in use and can't be deleted.	2540
File already exists	58
File already open	55
File not found	53
FindWhat argument contains an invalid expression.	2161
For loop not initialized	92
Format of memo file doesn't match specified external database format.	3286
Function isn't available in expressions	2426
G

Group levels can be created only in reports.	2152
GroupInterval can be set to zero only when GroupOn is set to Each Value.	2582
H

HAVING clause (|) without grouping or aggregation.	3091
Help isn't available due to lack of available memory or improper installation of Windows or Microsoft Access.	2078
Help isn't available for this item.	2068
I

I/O Error reading REG.DAT.	2726
I/O Error writing REG.DAT.	2727
IIF function requires parentheses: ()	2440
Illegal function call	5
Illegal type in expression.	3169
Improperly formed OLE information.	2696
In operator requires parentheses: ()	2429
Incompatible version of '|'; Microsoft Access can't run.	2058
Incompatible version of 'MSABC200.DLL'; Microsoft Access can't run.	2047
Incompatible version of 'WIN87EM.DLL'; Microsoft Access can't run.	2040
Index already exists.	3284
Index file not found.	3256
Index or primary key can't contain a null value.	3058
Input past end of file	62
INSERT INTO statement contains unknown field name '<fieldname>'.	3127
Insufficient memory to access | object's storage.	2738
Internal error	51
Invalid .INF file.	3168
Invalid add-in entry for '|'.	2309
Invalid argument used with DatePart, DateAdd or DateDiff function.	2468
Invalid argument.	3001
Invalid arguments used with domain function	2428
Invalid bracketing of name '|'.	3126
Invalid Century entry in [dBASE ISAM] section in msacc20.ini.	3227
Invalid CollatingSequence entry in [Paradox ISAM] or [dBASE ISAM] section in msacc20.ini.	3228
Invalid connection string in pass-through query.	3305
Invalid control number reference.	2458
Invalid database filename.	2347
Invalid database ID.	3276
Invalid database object.	3263
Invalid DataCodePage option in msacc20.ini.	3337
Invalid Date entry in [dBASE ISAM] section in msacc20.ini.	3213
Invalid Deleted entry in [dBASE ISAM] section in msacc20.ini.	3208
Invalid entries in [Btrieve] section in WIN.INI.	3221
Invalid entry.  Can't perform cascading operation specified in table '<tablename>' because value entered is too big for field '<fieldname>'.	3411
Invalid field data type.	3259
Invalid field name '<fieldname>' in definition of index or relationship.	3409
Invalid file format.	3182
Invalid file format; can't load bitmap from file |.	2114
Invalid form number reference.	2456
Invalid format specification for '|'.	2283
Invalid group level number reference.	2464
Invalid group level reference.	2463
Invalid index definition.	3285
Invalid index name.	2394
Invalid link format; can't create link to the other application.	294
Invalid Mark entry in [dBASE ISAM] section in msacc20.ini.	3214
Invalid Memo or OLE object in subquery '<queryname>'.	3342
Invalid method in expression.	2449
Invalid name '|'.	2091
Invalid NetworkAccess entry in msacc20.ini.	3248
Invalid object type.	2487
Invalid operation.	3219
Invalid option setting. Valid settings are 0 to |.	2093
Invalid PageTimeout entry in msacc20.ini.	3249
Invalid pattern string	93
Invalid property value.	3271
Invalid range.	3181
Invalid reference in SELECT statement.	3242
Invalid reference to '!|'.	2454
Invalid reference to '|'.	2482
Invalid reference to control '|'.	2453
Invalid reference to Dynaset property.	2466
Invalid reference to field '<fieldname>'.	2465
Invalid reference to form '|'.	2450
Invalid reference to Parent property.	2452
Invalid reference to property '|'.	2455
Invalid reference to RecordsetClone property.	7951
Invalid reference to report '|'.	2451
Invalid referential integrity constraint.	3395
Invalid report number reference.	2457
Invalid section number reference.	2462
Invalid section reference.	2461
Invalid setting for TabIndex property; correct values are from 0 to |.	2184
Invalid setting for TimerInterval property; correct values are from 0 to 65,535 milliseconds.	2183
Invalid setting of Action property.	2783
Invalid Show argument.	2523
Invalid SourceDoc or SourceItem properties were set.  The source application couldn't open the document.	2785
Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'.	3129
Invalid Stats entry in [dBASE ISAM] section in msacc20.ini.	3209
Invalid subclass '|' referred to in TypeOf function.	2477
Invalid TOP argument in select query.	3308
Invalid Top Value expression. Please enter a number greater than zero.	2346
Invalid Top Value expression. Please enter a percentage between 1% and 100%.	2345
Invalid Top Value expression. Please enter a smaller number.	2349
Invalid Top Value expression. Please enter an integer value or percentage.	2344
Invalid use of '.', '!', or '()'.	2447
Invalid use of '.', '!', or '()'.	2423
Invalid use of Is operator	2443
Invalid use of Null	94
Invalid use of parentheses	2442
Invalid use of vertical bars	2437
Invalid variant type for this option setting.	2092
'<queryname>' is an action query and can't be printed.	2334
'<tablename>' isn't an index in this table.	3015
'|' is corrupted or isn't a Microsoft Access database file.  To repair, clear the Read Only check box before opening the database, or use the Repair Database command.	2239
'|' isn't a valid account name.	3030
'|' isn't a valid database name.	3005
'|' isn't a valid name.	3125
'|' isn't a valid parameter name.	3223
'|' isn't a valid path.	3044
'|' isn't a valid setting for RowSourceType property.	2266
'|' isn't a valid toolbar name.	7852
'|' isn't an installed database type.	2507
<> in linked master field.	2472
<> in query expression '<expr>'.	3075
<> in query.	2471
<> in table-level validation expression.	3320
|1 in '|2' expression.	2473
J, K

Join expression not supported.	3296
JOIN operation '<tablename>' refers to a non-joined table.	3082
Joined table '<tablename>' not listed in FROM clause.	3080
L

LinkChildFields and LinkMasterFields property settings must have the same number of fields.	2335
Logon failed.  Message not sent.	2296
[Libraries] section missing from msacc20.ini; Form and Report Wizards won't be available.	2271
M

Macro '|' not found.	2485
Macro Name argument can't be longer than 64 characters.	2513
Maximum number of group levels exceeded.	2153
Maximum number of OLE objects already loaded.	2680
Message queue filled; DDE message lost.	295
Message text is too long.  Message not sent.	2292
Method not applicable for this object.	3273
Microsoft Access is corrupted. Reinstall from the original disks.	2080
Missing ), ], or |	2436
Missing destination field name in SELECT INTO statement (<sqlstmt>).	3105
Missing destination field name in UPDATE statement (<sqlstmt>).	3106
Missing field name.	2360
Missing memo file.	3166
Missing semicolon (;) at end of SQL statement.	3137
Module '|' not found.	2516
More arguments are being passed to the object member than are supported by Access Basic.	2775
More arguments were supplied than are accepted by the object member.	2759
MS-DOS file sharing lock count exceeded.  You need to increase the number of locks installed with SHARE.EXE.	3052
msacc20.ini is missing or isn't the correct version. Import/Export isn't available.	2062
Must be a device-independent bitmap (DIB).	2192
Must specify a unit of measurement.	2265
Must specify at least one Row Heading as Group By.	2331
Must specify destination table for query.	2333
Must specify one or more Row Heading(s), one Column Heading, and one Value.	2329
Must specify tables to delete from.	3128
N

Name '|' contains invalid characters or is too long.	2224
Name '|' contains invalid characters or is too long.	2049
Name not found in this collection.	3265
Negative numbers aren't allowed.	2061
No control is active.	2474
No current record.	3021
No data to output.	2307
No data was returned by the object member.	2779
No database specified in connection string or IN clause.	3321
No destination field name in INSERT statement (<sqlstmt>).	3352
No fields defined - cannot append table.	3264
No form is active.	2475
No match to replace in current field.	2141
No more DDE channels are available.	281
No more files could be created.	2742
No object of class |1 could be loaded from file |2.  Check both the class and file name.	2781
No output formats installed.	2281
No permission for '|'.	3033
No report is active.	2476
No Resume	19
No room to insert.	2400
No such index '<indexname>' on table '<tablename>'.	3372
No such relationship '<relationname>' on table '<tablename>'.	3377
None of the import field names match fields in the appended table.	3243
Not a recognized unit of measurement.	2264
Not a valid account name or password.	3029
Not a valid account name.	2612
Not a valid alias name.	3068
Not a valid bookmark.	3159
Not a valid control name.	2123
Not a valid document name: '<docname>'.	2006
Not a valid field name.	2372
Not a valid file name.	3055
Not a valid form name.	2124
Not a valid menu bar value: '|'.	2064
Not a valid Microsoft Access object type.	2606
Not a valid name for a menu, command, or subcommand.	2065
Not a valid number.	2200
Not a valid page number.	2206
Not a valid password.	2011
Not a valid password.	3031
Not a valid section name.	2195
Not a valid table name.	3177
Not a valid value for argument '|'.	2505
Not a valid value for the Spreadsheet Type argument.	2508
Not a valid value for the Transfer Type argument.	2506
Not enough disk space for printing.	2267
Not enough memory to complete the operation on the | object.	2749
Not enough memory to initialize print or graphics methods.	2159
Not enough memory to load some library databases.	2268
Not enough memory to open '|'.	2048
Not enough memory to run NotInList event procedure.	2311
Not enough memory to start Cue Cards.	2000
Not enough memory to start Microsoft Access.	2005
Not enough space on disk.	3026
Not enough space on temporary disk.	3183
Not enough stack memory left.	2057
Not enough system resources to update display.	2052
Not enough system resources.	2301
Not Yet Implemented.	2002
Null is invalid.	3162
Number  of query values and destination fields aren't the same.	3346
Numeric field overflow.	3349
Numeric reference to Property object is out of range.	2480
'|' not part of aggregate function or grouping.	3122
O

Object '|' already exists.	3012
Object '|' isn't open.	2489
Object frame doesn't contain an OLE object.	2771
Object has no value	2427
Object is invalid for operation.	3350
Object is no longer valid.	3420
Object isn't a collection.	3272
Object referred to in expression no longer exists.	2467
Object storage cannot be accessed.	2733
Object variable not Set	91
ODBC Refresh Interval must be in the range of 1-3600 seconds.	2085
ODBC Specification Conformance Error (|).  This error should be reported to the ODBC driver vendor.	3299
ODBC--call failed.	3146
ODBC--Can't lock all records.	3254
ODBC--connection to '|' failed.	3151
ODBC--couldn't create table.	3232
ODBC--couldn't find DLL '|'.	3154
ODBC--data out of range.	3238
ODBC--data type not supported on server.	3235
ODBC--delete failed on attached table '<tablename>'.	3156
ODBC--field would be too long; data truncated.	3231
ODBC--insert failed on attached table '<tablename>'.	3155
ODBC--linked table definition has changed.	3247
ODBC--remote query timeout expired.	3234
ODBC--update failed on attached table '<tablename>'.	3157
OLE 1 objects cannot be presented as icons	2797
OLE/DDE Timeout must be from 0 to 300 seconds.	2050
One or more of the OLE support .DLL's installed on your machine is the incorrect version.	2724
One or more values entered is prohibited by the validation rule '|2' set for '|1'.	3317
Only one Counter field is allowed per table.	2363
Operation aborted.	2751
Operation cancelled by user.	3059
Operation cancelled.	2001
Operation invalid without a current index.	3019
Operation must use an updatable query.	3073
Operation not supported in transactions.	3246
Operation not supported on attached tables.	3057
Operation not supported on Paradox table with no primary key.	3207
Operation terminated because Esc key was pressed before completion.	287
Operation was cancelled.	2728
Options argument in Quit action isn't valid.	2490
ORDER BY clause (|) conflicts with DISTINCT.	3093
ORDER BY clause (|) conflicts with GROUP BY clause.	3094
ORDER BY expression (<expr>) uses non-output fields.	3351
Out of memory	7
Out of memory during calculation	2446
Out of memory during search.	2175
Out of memory.	2004
Out of MS-DOS file handles.	3042
Out of space while saving the | object.	2741
Out of stack space	28
Out of string space	14
Out-of-date Paradox lock file.	3230
Outdated '|' file.  Please reinstall Microsoft Access.	2072
Output format not available.	2282
Overflow	6
P

Page number given as an argument for the GoToPage action is out of range.	2163
Paradox index is not primary.	3288
Parameter '<tablename>' specified where a table name is required.	3216
Parameter '|' specified where a database name is required.	3217
Pass-through query must contain at least one character.	3359
Pass-through query with ReturnsRecords property set to True did not return any records.	3325
PasteLink already performed on this control.	296
Path not found	76
Path/File access error	75
Permission denied	70
Please verify the new password by entering it in the Verify box and pressing Enter.	2600
Primary key already exists.	3283
Print and graphics methods and their associated properties can be used only while printing or previewing a report.	2158
Procedure '|' not found in the specified module.	2521
Procedure '|' not found.	2517
Property '|' must be set before using this method.	3386
Property can be set only when the field is part of a Recordset object's Fields collection.	3267
Property not found.	3270
Property setting can't be larger than 2 KB.	3309
Property specified already exists.	3311
Q

Query '<queryname>' is corrupt.	3340
Query can't contain a Database parameter.	3222
Query contains ambiguous outer joins.	3258
Query does not return records.	3323
Query input must contain at least one table or query.	3067
Query is too complex.	3360
Query must have at least one output field.	3066
Query support unavailable.	3389
R

Range argument can't be longer than 255 characters.	2509
Record in table '<tablename>' is locked by another user.	3330
Record in table '<tablename>' was deleted by another user.	3329
Record is deleted.	3167
Record is too large.	3047
Record(s) can't be added; no corresponding record on the 'one' side.	3363
Record(s) can't be added; no Insert Data permission on '|'.	3107
Record(s) can't be deleted; no Delete Data permission on '|'.	3109
Record(s) can't be edited; no Update Data permission on '|'.	3108
Record(s) can't be read; no Read Data permission on '|'.	3112
Records in table '<tablename>' would have no record on the 'one' side.	3333
Relationship must be on the same same number of fields with the same data types.	3368
Removing or changing the index for this field would require removal of the primary key.	2370
RepeatCount argument in RunMacro action can't be less than 0.	2500
Reports may only be embedded in other reports, not in forms.	2177
Reserved error (|); there is no message for this error.	3000
Resultant table may not have more than one Counter field.	3090
Resume without error	20
Return without GoSub	3
RunSQL action can only run action query SQL statements.	2342
S

Search Criteria wasn't specified; use the FindRecord action or the Find command.	2143
Section width is greater than page width and there are no items in the additional space.  Some pages may be blank.	2188
SELECT INTO remote database tried to produce too many fields.	3185
SelectObject action requires an open database.	2519
SHARE.EXE must be installed for OLE support to work correctly.	2745
Single-row update/delete affected more than one row of a remote table.  Index specified as unique contains duplicate values.	3362
Some Add-In menu entries couldn't be loaded because too many were specified.	2086
Some library databases couldn't be loaded because too many were specified.	2269
Specification column '<columnname>' doesn't match a table column.	2082
Specification doesn't exist in this database or has no columns defined.	2073
Specification has too many columns for that table.	2081
Specification Name argument can't be longer than 64 characters.	2510
Specified icon is corrupted.	2245
Start and width must be greater than 0.	2084
String formula too complex	16
Sub or Function not defined	35
Subforms can't be nested more than three deep.	2171
Subscript out of range	9
Syntax error	2433
Syntax error	2438
Syntax error	2432
Syntax error	2434
Syntax error	2431
Syntax error in ALTER TABLE statement.	3293
Syntax error in CONSTRAINT clause.	3289
Syntax error in CREATE INDEX statement.	3291
Syntax error in CREATE TABLE statement.	3290
Syntax error in date	2421
Syntax error in default value.	3355
Syntax error in DELETE statement.	3130
Syntax error in DROP INDEX statement.	3294
Syntax error in DROP TABLE statement.	3295
Syntax error in field definition.	3292
Syntax error in FROM clause.	3131
Syntax error in GROUP BY clause.	3132
Syntax error in HAVING clause.	3133
Syntax error in INSERT statement.	3134
Syntax error in JOIN operation.	3135
Syntax error in LEVEL clause.	3136
Syntax error in number	2420
Syntax error in ORDER BY clause.	3138
Syntax error in PARAMETERS clause.	3139
Syntax error in PROCEDURE clause.	3140
Syntax error in SELECT statement.	3141
Syntax error in string	2422
Syntax error in TRANSFORM statement.	3143
Syntax error in union query.	3319
Syntax error in UPDATE statement.	3144
Syntax error in WHERE clause.	3145
Syntax error in WITH OWNERACCESS OPTION declaration.	3257
Syntax error or missing Control Wizard.	2189
Syntax error or missing report output function.	2587
T

Table '<table1>' already has an index named '<table2>'	3375
Table '<tablename>' already exists.	3010
Table '<tablename>' doesn't exist.	3376
Table '<tablename>' has no primary key.  You can't select it as the related table in a one-to-one relationship.	2647
Table '<tablename>' is exclusively locked by user '<username>' on machine '<machinename>'.	3189
Table '<tablename>' is exclusively locked.	3008
Table '<tablename>' is read-only.	3328
Table doesn't have any fields; can't save.	2361
Table isn't open.	3160
Tables are the only objects that can be exported from version 2.0 to version 1.x databases.  No objects can be imported or attached to in version 1.x databases opened in Microsoft Access 2.0.	7854
Text too long.	2117
Text would be too long; change cancelled.	2221
That feature is not available for the | object.	2748
That file already exists.	2736
The 'device=|' entry in the WIN.INI file isn't valid.	2204
The | object cannot be saved at this time.	2734
The | object contains an event name longer than or results in a procedure name longer than 40 characters.	2795
The | object does not appear to be correctly registered.	2702
The | object event contains an unnamed parameter.	2796
The | object has no supported verbs.	2714
The | object is corrupted and might not be displayed properly.	2241
The | object is not stored as linked object.	2788
The | object is stored in a format not compatible with the version of OLE on your computer.	2743
The | object's storage is locked by another user.	2740
The Action property can be set only in Form view.	2789
The action was cancelled by an associated object.	3426
The active OLE object is busy.  Complete the current operation or press Enter and then try again.	2729
The AddMenu action can be used only in a macro specified as the MenuBar property setting.	2067
The ApplyFilter action can be called only from a macro run from the OnOpen property.	2583
The array index is outside the bounds of the object member.	2768
The class | does not support loading objects from a file.	2780
The class | does not support OLE Automation.	2773
The contents of the Clipboard have been deleted and can't be pasted.	2541
The crosstab query underlying a subform or subreport must have fixed column headings.	2172
The current window is not the window that invoked the builder. Builder failed.	2276
The data in this field is not recognized as an OLE object.	2685
The database '|' is already open as a library database.	2274
The database is opened by user '|2' on machine '|1'.  You can't open this database exclusively.	3356
The DDE transaction failed.  Check to ensure you have the correct version of DDEML.DLL.	298
The default column width must be at least 0.1 inch.	7853
The default printer driver '|.DRV' wasn't found.  Reinstall using the Windows Control Panel.	2205
The file could not be found.	2737
The file name '|' is too long.	2223
The FindRecord action requires a FindWhat argument.	2142
The GoToControl action can't be executed until the field being edited is saved.	2108
The item type is invalid.	2149
The Jet database engine has encountered a problem in your database.  To correct the problem, you must repair and compact the database.	3428
The key combination '|1' in '|2' is also assigned to another macro.  Only the first one will be used.	2070
The key combination '|1' in '|2' isn't valid and will be ignored.	2069
The left and right margins are wider than the page.	2193
The MoveLayout and NextRecord run-time properties can't both be set to FALSE; to ensure that the report advances both have been set back to TRUE.	2586
The new alias is too long.  Aliases can't exceed 64 characters.	2343
The new name, '|', is too long.  Microsoft Access object names can't exceed 64 characters.	2051
The number is too large.	2263
The number of columns in the two selected tables or queries of a union query don't match.	3307
The object cannot be activated on receiving focus.	2799
The object cannot convert one of the arguments passed to the member.	2765
The object does not allow the member to be set.	2764
The object does not contain a member named |.	2766
The object does not support OLE Automation.	2774
The object does not support the language in use.	2767
The object is locked and any changes you made will be discarded when the form is closed.	2800
The object member contains a data type not supported by Access Basic.	2769
The object member does not contain a value.	2782
The object member is not an array.	2776
The object referenced is not an active OLE object.	2770
The OLE Custom Control does not match its description in the registration database.	2794
The OLE object created or in use is not a linked OLE object.	2786
The OLE object is not loaded because the unbound OLE control has not been initialized.	2801
The operation on the | object could not be successfully completed.	2750
The other application couldn't be found in any of the directories in your PATH.  Please check your AUTOEXEC.BAT file.	2075
The other application couldn't be started because the .EXE file isn't valid.	2076
The other application is already in use.	2701
The other application is busy.	288
The other application or a .DLL could not be found.  Verify that it is properly registered.	2700
The other application quit.	291
The other application won't perform the DDE method or operation you attempted.	285
The path you specified was not found.	2744
The record being edited can't be saved.  If you close the form, the changes you've made to the record will be lost.  Close anyway?	2169
The relationship has been created as a one-to-one relationship because there is a unique index on the field(s) specified for the related table.	2648
The Requery action can't be executed until the field is saved.	2118
The Requery action can't be used on control <ctlname>.	2119
The required class name was not supplied or was invalid.	2777
The section ID is invalid.	2148
The selected name is too long for Microsoft Access.	2059
The server's MSysConf table exists, but is in an incorrect format.  Contact your system administrator.	3407
The setting for BoundColumn can't be greater than the number of columns set with the ColumnCount property.	2127
The setting for ColumnCount must be from 1 to 255.	2126
The setting for DecimalPlaces must be from 0 to 15.  You also can enter Auto (-1) for the default.	2132
The setting for DefaultEditing must be Allow Edits, Read Only, Data Entry, or Can't Add Records.	2129
The setting for Field Size must be from 0 to 255.	2373
The setting for FontSize must be from 1 to 127.	2125
The setting for GridX or GridY must be from 1 to 64.	2130
The setting for ListRows must be from 1 to 255.	2144
The setting for RowSourceType must be Table/Query, Value List, Field List, or the name of a valid Access Basic fill function.	2128
The setting for the Update Retry Interval must be from 0 to 1,000 milliseconds.	2272
The setting for this property can be changed only with the Object/Change Link command on the Edit menu.	2168
The setting for this property is too long.	2176
The setting for Update Retries must be from 0 to 10.	2273
The setting for Width must be from 0 to 22 inches (55.87 cm).	2134
The setting you entered isn't valid for this property.	2101
The SourceDoc property entry is too long.	2784
The specified fields are not uniquely indexed in table '<tablename>'.	3374
The storage is in use by another user.	2739
The string returned by the builder was too long.  Truncating result.	2275
The sum of the left and right margins is greater than the width of the selected paper size.	2208
The sum of the top and bottom margins and page header and footer heights is greater than the page length.	2157
The sum of the top and bottom margins is greater than the length of the selected paper size.	2209
The tab stop width must be an integer from 1 to 30.	7858
The text you enter must match an entry in the list.	2237
The value you entered is prohibited by the validation rule set for this field.	2107
The value you entered isn't appropriate for the input mask '<maskname>' specified for this field.  Press Esc to cancel your changes.	2279
The value you entered isn't appropriate for this field.	2113
The verb index is out of range for this | object.	2715
There are several tables with that name.  Please specify owner in the format 'owner.table'.	3298
There is a problem with the registration database.	2725
There is already a relationship named '|' in the current database.	3378
There is no |.	2544
There is no control named '|'.	2109
There is no default printer.  Select or install one using the Windows Control Panel.	2202
There is no field named '<fieldname>' in table '<tablename>'.	3381
There is no form named '|'.	2102
There is no object in this control.	2683
There is no primary key in table '<tablename>'.	3392
There is no record in table '<tablename>' with key matching field(s) '<fieldname>'.	3101
There is no report named '|'.	2103
There was a problem initializing MSAOLE20.DLL.	2758
There was a problem loading the | object.	2697
There was a problem reading the | object.	2687
There was a problem saving the | object	2698
There was an error while attempting to communicate with Cue Cards.	2074
This | object does not support the attempted operation.	2723
This | object has no presentation information.	2704
This | object is not initialized or is missing presentation information.	2717
This control can't contain other controls.	2150
This control can't contain that type of control.	2151
This control is read-only and can't be modified.	2222
This copy of Microsoft Access has expired.  Please get a new copy from your Microsoft distributor.	2012
This copy of Microsoft Access hasn't been personalized properly.  Please reinstall using the provided Setup program.	2013
This database already contains a toolbar named '|'.	7851
This database currently has no import/export specifications.	2077
This database is already in the current database format.	2557
This field is empty.  Use Insert Object to create a new object.	2684
This method or property is not currently available on this Recordset.	3425
This property can be set only in Design view; it's read-only otherwise.	2136
This property has been replaced by a new property; use the new property instead.	2190
This property is available only in Design view.	2187
This property is available only when the control has the focus.	2185
This property isn't available in Design view.	2186
This property isn't supported for external data sources or for databases created in a previous version of Microsoft Access.	3310
This query is not a properly formed data-definition query.	3357
This Recordset is not updatable.	3326
This report is bound to a table or query that doesn't exist: '<tblqryname>'.	2580
This table is read-only.  Use a different name in the Save As dialog box to save your changes.	2378
This value must be a number.	2262
Timeout while waiting for DDE response.	286
To make changes to this field, first save the record.	3331
Too many active users.	3239
Too many Btrieve tasks.	3215
Too many builder entries in the '|' section.	2310
Too many client tasks.	3053
Too many columns in output.	2305
Too many control styles.	2300
Too many crosstab column headers (|).	3205
Too many expressions in DISTINCT output.	3089
Too many expressions in GROUP BY clause.	3087
Too many expressions in ORDER BY clause.	3088
Too many FastFind Sessions were invoked.	3408
Too many fields defined.	3190
Too many files	67
Too many Memo or OLE object fields.	3054
Too many message attachments.  Message not sent.	2291
Too many message recipients.  Message not sent.	2290
Too many OLE objects on your form.	2746
Too many output formats.  Some will not be available.	2280
Too many rows in output.	2306
Top not allowed in delete queries.	3318
Type mismatch	13
U

Unable to generate a presentation from the converted | object.	2695
Unable to save the | object.	2686
Undefined function '|' in expression.	3085
Unexpected data exchange error.	2240
Unexpected error from external database driver (|).	3275
Unions not allowed in a subquery.	3361
Unknown function '|2' in validation expression or default value on '|1'.	3388
Unknown function name	2425
Unknown message recipient(s).  Message not sent.	2295
Unknown name	2424
Unknown or invalid field reference '<fieldname>'.	3345
Unknown or invalid reference '<reference>' in validation expression or default value in table '<tablename>'.	3344
Unknown toolbar  '|'.	2094
Unrecognized database format '|'.	3343
Update without AddNew or Edit.	3020
User-defined properties don't support a Null value.	3385
V

Validation rules and default values can't be placed on system or attached tables.	3312
Value field can't specify a Criteria clause.	2337
Value field can't specify Group By in the Totals cell.  Specify a function.	2326
W, X

Wildcard characters aren't allowed in file name.	2053
Write protect error while saving the | object.	2735
Wrong data type for parameter '|'.	3060
Wrong number of arguments used with function	2439
Wrong Paradox sort sequence.	3220
Y

You already have an open document named '<docname>'; you must close it before you can save or rename another document under the same name.	2007
You already have something named '|'.	2104
You can't change permissions for '|'.	2616
You can't use aggregate functions in a page header or footer.	2584
You can't view this object's permissions.	2604
You cannot use ODBC to attach an external Microsoft Access or ISAM database table to your database.	3423
You do not have sufficient access rights or license as required to open or create the OLE object.	2803
You don't have permission to change the owner of '|'.	2615
You don't have permission to copy '|'.	2608
You don't have permission to cut '|'.	2607
You don't have permission to delete '|'.	2609
You don't have permission to execute '|'.	2603
You don't have permission to import or export '|'.	2617
You don't have permission to modify '|'.	2602
You don't have permission to read '|'.	2601
You don't have permission to read this form.	2614
You don't have permission to rename '|'.	2613
You must enter a personal identifier (PID) consisting of at least four and no more than 20 characters and digits.	2610
You must enter a personal identifier (PID) consisting of at least four and no more than 20 characters and digits.	3304
You must select an existing table or query to use a Form or Report Wizard.	2120
You must specify a destination database or a new name in order to copy.	2545
You must specify a field or expression to sort on.	2581
Z

Zero-length string is valid only in a text or Memo field.	3415