PRINT2 v4.2 Corrected Re-Assigment of Drive and Directory when you quit the program. It will now restore the drive and directory that you started the program from. PRINT2 v4.1 NOW FREEWARE! REASON? The printer industry can't decide on a standard for Printer ESC Codes which makes it IMPOSSIBLE for a programmer to create a program to handle every type of printer out there. So, Rather than scrap PRINT2 from the books, I decided to release it "AS IS" as Freeware. Of Course, Donations for the Program will always be accepted. Over the 4 years this program was released, I have had a few users who help support it and probably got this program working properly. Basically, Version 4 or above is FREEWARE as stated. If you can use it, Fine, if not, Delete it. It is FREE which also makes it No Bitch-ware too. This release adds the capability of you to Select a HD Drive when the program first starts up. From there, you can choose your Directory and filename to print. PRINT2 v4.0 Had a bug with accessing the Printer port. PRINT2 v3.x Last of the Shareware product line. Use of this version requires a registration fee. PRINT2 v3.5 Fixed a Bug with the HLP file not showing up when not using the SET PRINT2 statement. Fixed a problem with the DeskJet mode and Margin Settings. Limited the SOUND to ERRORS and only when the Printing is finished. This way you could walk away and just wait for the whistle to let ya know it was done printing. PRINT2 v3.4 Cleaned up Sound Effects a bit. FIDO ADDRESS CHANGED to 1:2614/716. Please Note this. FREQ PRINT2 from FidoNet PRINT2 v3.3 In LaserJet Mode, Move the Page text down 1 line to Clear Top Margin. PRINT2 v3.2 Added support for LEGAL SIZE paper /L and A4 Size paper /A4 for DESKJET and LASERJET PRINTERS ONLY!!! The laserjet and deskjet mode prints the document in 2 column LANDSCAPE mode so with the /A4 switch added this will adjust the margins and layout of the page for these types of paper. (Sorry DotMatrix users, You are stuck in portrait mode printing). PRINT2 v3.1 Added an Environment variable so that you can PUT PRINT2 in a directory other than the Root Directory. SET PRINT2=C:\xxxxxxx where C:\xxxx is Drive and dir. (required when using this). FIXed the DESKJET Printing Mode. Now Prints in LANDSCAPE mode for DESKJETs and the LaserJet printers. (sorry dot matrix users!). The program now draws a Dividing line down the page to separate the 2. See Information for 3.0Beta for more fixes. PRINT2 v3.0á Added full support for DESKJET Series printers without the need for an additional cartridge. Fixed a problem in LASERJET mode with a CR/LF combination not being sent all the time to terminate the lines. Full support now enabled for DOTMATRIX which seems to work just fine. DESKJET MODE Page shortened to 58 lines per page to allow LANDSCAPE mode Printing on the Page which is much nicer. Landscape ALLOWS you to put 3 Hole Punch Paper in the tray to make your docs BINDER READY. Enjoy! 3.0á was NOT officially release, Just BETA Test. Version 2.x was a DISASTER! MANY UnExpected BUGS! So, Version 2.x is a write off. Version 3.x fixed alot. Plus added the DESKJET Landscape Mode Printing! PRINT2 v2.4 Added the DESKJET codes. Now you can use PRINT2 with Dot Matrix, Laserjets, or Deskjet printers. I have also changed the array sequence again for the Dot Matrix mode/DeskJet mode. Some eroneous characters were appearing at the beginning of the lines. PRINT2 v2.3 BUG Fixed in DOTMATRIX Mode. Fixed array size which caused a Form Feed character to be mixed in at the end of each line. Dont know why it got there, didnt have it in version 2.1, but it is fixed now. Just blame the programmer! PRINT2 v2.2 Minor changes, No change in Function of program. Just added an Alarm after it is done printing for when you print those documents and walk away. Also, I clarified the PRINT2 ERROR Screens to inform user that the PRINT2 Files MUST be located in the C:\ (Root Directory of C: DRIVE). This way you can run it from anywhere!! Just keep C:\ in your PATH statement. PRINT2 v2.1 I made PRINT2 look for its .CFG and .HLP file at C:\ (the Root directory!) I did this so that you can run PRINT2 from any drive, anywhere as long as you have the C:\ in your PATH statement. Print2 now returns to the PICK a FILE window after completion of the printout to continue. Batch MODE is still supported by running PRINT2 from the command line. It will print and just exit. PRINT2 v2.0 Now has a Graphical User Interface pick and click file routine. Mouse Support, as well as graphical windows, Online Help, And now supporting LASERJET as well as DOT MATRIX PRINTERs!!!! SHAREWARE version. Registration is only $15.00 US PRINT2 v1.1 Freeware Version.. Just supported LASERJET printers. Limited graphic support, no WINDOWS, TEXT mode. Works really well for just LASERJET printers. No file picking window. NO Mouse. Freeware.